The relative formula mass of sodium hydroxide, NaOH, is 40.00. This calculator adds the relative atomic masses of sodium, oxygen and hydrogen to give the dimensionless value, and shows the contribution from each element.
Formula
For a chemical formula, relative formula mass is the sum of the relative atomic masses of all atoms represented in that formula. For sodium hydroxide, NaOH, the calculation is:
Mr(NaOH) = Ar(Na) + Ar(O) + Ar(H)
Using the IUPAC abridged standard atomic weights shown in the calculator:
Mr(NaOH) = 22.990 + 15.999 + 1.008 = 39.997
- Mr is the relative formula mass. It has no unit because it is a ratio to one-twelfth of the mass of a carbon-12 atom.
- Ar(Na) is the relative atomic mass of sodium, 22.990.
- Ar(O) is the relative atomic mass of oxygen, 15.999.
- Ar(H) is the relative atomic mass of hydrogen, 1.008.
The calculator treats the numbers of atoms as inputs, with each set to one for NaOH. The displayed relative formula mass is rounded to three decimal places: 39.997 rounds to 40.00 if shown to two decimal places. The second output gives the corresponding molar mass in grams per mole; its numerical value is the same, but its unit is g/mol.
Worked Example
With the calculator’s default inputs, NaOH contains one sodium atom, one oxygen atom and one hydrogen atom per formula unit.
- Sodium contribution: 1 × 22.990 = 22.990.
- Oxygen contribution: 1 × 15.999 = 15.999.
- Hydrogen contribution: 1 × 1.008 = 1.008.
- Add the contributions: 22.990 + 15.999 + 1.008 = 39.997.
The calculator reports 39.997 to three decimal places. To two decimal places, this is 40.00, the commonly quoted relative formula mass of sodium hydroxide. Its molar mass on the same atomic-weight basis is 39.997 g/mol, or approximately 40.00 g/mol.
Assumptions
- The formula is anhydrous sodium hydroxide, NaOH, with one Na, one O and one H atom per formula unit.
- The atomic weights used are Na 22.990, O 15.999 and H 1.008.
- The calculator reports the unrounded sum to three decimal places; the headline value 40.00 is rounded to two decimal places for the direct answer.
Relative Formula Mass and Molar Mass
These two quantities have matching numerical values but different meanings. Relative formula mass compares the mass of a formula unit with a defined atomic-mass reference and is dimensionless. Molar mass is the mass of one mole of those formula units, so it has units such as g/mol. For sodium hydroxide, the standard calculation gives Mr = 39.997 and a molar mass of about 39.997 g/mol.
Strictly, NaOH is an ionic compound: a solid sample consists of a repeating arrangement of sodium and hydroxide ions rather than separate, discrete NaOH molecules. “Formula unit” is therefore the precise term for the smallest whole-number ratio represented by NaOH. Relative formula mass is appropriate for ionic compounds; “relative molecular mass” is generally used for substances made of molecules.
For practical calculations, a value of 40.00 g/mol is convenient. More decimal places do not necessarily make a measurement more accurate: the precision of a result also depends on the atomic-weight convention, reagent purity, weighing and the measurement method.
What the Formula Tells You
The subscripts and element symbols in a formula determine which atomic masses to add. In NaOH, no subscript means one atom of that element. Parentheses or subscripts change the count: for example, a formula with two oxygen atoms would include the oxygen atomic mass twice. When a hydrate or other compound is specified, its complete formula must be used rather than the formula of the anhydrous substance alone.
Sodium hydroxide is also called caustic soda or lye. It is a strong base and, in water, dissociates substantially into sodium ions and hydroxide ions. That behavior explains its chemical uses, but it does not alter the formula-mass calculation: the calculation counts the atoms in the stated formula, not the ions present after dissolving.
Using the Value in Calculations
Molar mass connects a measured mass to an amount of substance. The basic relationship is n = m/M, where n is amount in moles, m is mass in grams and M is molar mass in g/mol. Rearranging gives m = nM. For example, a purely mathematical calculation for 0.100 mol of NaOH gives 0.100 mol × 39.997 g/mol = 3.9997 g, about 4.00 g. This is an arithmetic illustration, not a preparation procedure.
Likewise, a sample mass can be converted to moles by dividing by approximately 40.00 g/mol. Use unrounded values during intermediate calculations when suitable, then round the final answer to match the precision of the measured data. In solution calculations, distinguish the mass of solute from the final solution volume; the latter is not automatically equal to the volume of solvent used.
Common Mistakes and Safety
- Adding the wrong number of atoms: Read every subscript carefully. NaOH has one of each listed atom; a missing subscript means one.
- Confusing units: Relative formula mass has no unit, while molar mass is expressed in g/mol. Their numerical values are usually the same on the chosen atomic-weight basis.
- Rounding too early: The sum from the listed weights is 39.997. It rounds to 40.00 at two decimal places; do not treat those displayed figures as contradictory.
- Ignoring the stated form: A hydrate or a different chemical formula has a different formula mass. Check the label or specification rather than assuming the material is anhydrous NaOH.
Sodium hydroxide is corrosive and can cause severe skin and eye burns. The calculator is for study and lab-planning arithmetic, not a substitute for handling guidance. Where bench work is involved, follow your lab method, the safety data sheet (SDS) and your supervisor; use the required protective equipment and avoid contact with the solid or its solutions.
Frequently Asked Questions
What is the relative formula mass of NaOH?
It is 39.997 using Na 22.990, O 15.999 and H 1.008. This is commonly rounded to 40.00.
Why does sodium hydroxide have a formula mass of about 40?
Its formula contains one sodium, one oxygen and one hydrogen atom. Their relative atomic masses add to 22.990 + 15.999 + 1.008 = 39.997.
Is the molar mass of NaOH also 40?
Approximately. The molar mass is about 39.997 g/mol, commonly reported as 40.00 g/mol. Relative formula mass itself has no unit.
Is NaOH a molecule?
In the solid, sodium hydroxide is an ionic compound with a repeating crystal structure. NaOH represents its formula unit, so “relative formula mass” is more precise than “relative molecular mass.”
Does dissolving NaOH change its formula mass?
No. Dissociation in water changes the species present in solution, but it does not change the formula mass assigned to NaOH for mass-to-mole calculations.
Why might a reference give a slightly different value?
References may use different atomic-weight precision or rounding conventions. Small last-digit differences can result; the commonly used practical value remains about 40.00 g/mol.
Related
Formula used
in na | Sodium atoms | - | 1 | 0 | 1 in o | Oxygen atoms | - | 1 | 0 | 1 in h | Hydrogen atoms | - | 1 | 0 | 1 out mr | Relative formula mass of sodium hydroxide | - | na * 22.990 + o * 15.999 + h * 1.008 | 3 out mm | Molar mass | g/mol | mr | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Pressure Density Depth Formula for Fluids98,066 Pa
- Pressure Density Temperature Equation Calculator100,961.74 Pa
- Pressure Density Cup: What It Measures and How It Works1.0000 g/mL
- Pressure, Density, and Temperature: How They Relate101,307 Pa
- Pressure-Based vs Density-Based Solvers in CFD
- Pressure-Based vs Density-Based Solvers in CFD