molecalculator

Moles & Molar Mass

Relative Molecular Mass of Sulfuric Acid (H₂SO₄)

Calculator No. 01-2897 · Updated · Formula and assumptions shown below

Relative molecular mass of sulfuric acid 98.072
Molar mass
98.072 g/mol
= Relative molecular mass of sulfuric acid
Hydrogen atoms
2
Set in the form below
Sulfur atoms
1
Set in the form below
You enter
Hydrogen atoms, Sulfur atoms, Oxygen atoms
You get
Relative molecular mass of sulfuric acid, Molar mass (g/mol)
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The relative molecular mass of sulfuric acid, H₂SO₄, is 98.072. Enter the numbers of hydrogen, sulfur, and oxygen atoms in the formula to calculate the total from their standard atomic weights; the calculator returns a dimensionless relative molecular mass and the corresponding molar mass in g/mol.

Formula

For a molecular formula, relative molecular mass is the sum of the relative atomic masses of all atoms in one molecule:

Mr = nHAr(H) + nSAr(S) + nOAr(O)

  • Mr is relative molecular mass; it has no unit.
  • nH, nS, and nO are the atom counts in the formula, also dimensionless.
  • Ar(H) = 1.008, Ar(S) = 32.06, and Ar(O) = 15.999 are the abridged standard atomic weights used here.

The molar mass has the same numerical value as the relative molecular mass when expressed in g/mol: M = Mr g/mol. This relationship is a consequence of the way the relative atomic mass scale and the mole are defined; it does not mean that a single molecule has a mass of 98.072 grams.

Worked Example

Using the calculator defaults, sulfuric acid has 2 hydrogen atoms, 1 sulfur atom, and 4 oxygen atoms:

Mr = 2 × 1.008 + 1 × 32.06 + 4 × 15.999

Mr = 2.016 + 32.06 + 63.996 = 98.072

Therefore, the relative molecular mass is 98.072, and the molar mass is 98.072 g/mol. Rounded to two decimal places, the commonly reported molar mass is 98.07 g/mol.

Assumptions

  • The calculation uses the molecular formula H₂SO₄, with two hydrogen, one sulfur, and four oxygen atoms per formula unit.
  • It uses the displayed abridged standard atomic weights: H 1.008, S 32.06, and O 15.999. Published tables may use slightly different values or precision.
  • The calculation is a formula-based mass calculation. It does not account for concentration, purity, temperature, or the behavior of sulfuric acid in a solution.
  • The atom-count inputs are nonnegative and allow arithmetic with any formula; for sulfuric acid specifically, use 2, 1, and 4.

What Relative Molecular Mass Means

Relative molecular mass, symbol Mr, compares the mass of a molecule with one-twelfth of the mass of a carbon-12 atom. It is a ratio, so it is a pure number rather than a mass in grams, kilograms, or g/mol. The result depends on which atoms appear in the molecular formula and the atomic weights used in the calculation.

Sulfuric acid’s formula is H₂SO₄: the subscript 2 applies to hydrogen, while the subscript 4 applies to oxygen. Sulfur has no subscript, which means one sulfur atom. A missing subscript is not zero and does not mean that the atom count is unknown.

The related quantity molar mass, commonly written M, describes the mass of one mole of a substance. For sulfuric acid, it is approximately 98.072 grams per mole under the chosen atomic-weight convention. The two numerical values match, but their meanings and units differ: Mr is dimensionless, while molar mass carries units of g/mol.

How the Calculation Works

The calculation multiplies each element’s atom count by its relative atomic mass, then adds the contributions. For H₂SO₄, the hydrogen contribution is 2 × 1.008 = 2.016, the sulfur contribution is 1 × 32.06 = 32.06, and the oxygen contribution is 4 × 15.999 = 63.996. Their sum is 98.072.

This is the same method used for other molecular formulas: read each element’s subscript as its atom count, multiply by the appropriate atomic weight, and sum. Parentheses require an extra counting step. For example, in a formula containing a group in parentheses followed by a subscript, multiply every atom count inside the group by that outside subscript before calculating the mass.

The calculator exposes the atom counts so the arithmetic is easy to inspect. For the named substance, leave the defaults unchanged. If you enter different counts, the result applies to the formula represented by those inputs, not necessarily to sulfuric acid.

Precision and Common Confusions

A value of 98.07 g/mol is a sensible rounded answer for many general chemistry calculations; 98.072 is the more precise result from the atomic weights displayed above. Keep extra digits during intermediate steps and round the final answer to suit the precision needed. Rounding each atomic contribution too early can slightly alter the total.

Atomic weights are tabulated values and may be reported at different precision. Natural sulfur, for example, contains isotopes in proportions that can vary, which contributes to the conventional atomic-weight value. Thus, a result quoted as 98.08 or 98.079 in another reference may reflect a different atomic-weight convention or rounding, rather than a different chemical formula. For routine calculations, state the convention or precision when the distinction matters.

A common misconception is that relative molecular mass itself should be written as 98.072 g/mol. Strictly, that unit belongs to molar mass. Another is to confuse molar mass with the mass of a particular sample: a sample’s mass also depends on how much substance it contains. The relationship is mass in grams = amount in moles × molar mass in g/mol.

Using Molar Mass in Chemistry

Molar mass connects a weighed sample with an amount of substance. Divide a sample’s mass in grams by its molar mass in g/mol to obtain the amount in moles. Conversely, multiply moles by molar mass to find the corresponding mass. For instance, 1.00 mol of pure sulfuric acid corresponds to about 98.07 g; 0.500 mol corresponds to about 49.0 g when rounded suitably.

These are stoichiometric relationships, not instructions for handling or preparing acid. A calculation based on H₂SO₄ alone does not determine the concentration or density of a particular solution, and it does not describe how acid behaves in water. Solution calculations require additional information, such as the amount of acid and the final solution volume; practical work also depends on the specific procedure and safety controls.

Frequently Asked Questions

What is the relative molecular mass of H₂SO₄?
Using H 1.008, S 32.06, and O 15.999, it is 98.072. It is often rounded to 98.07.

Is sulfuric acid’s relative molecular mass 98 or 98.07?
Both can be appropriate at different levels of rounding. The calculation from the stated atomic weights gives 98.072, which rounds to 98.07 to two decimal places and 98 to the nearest whole number.

What is the molar mass of sulfuric acid?
It is approximately 98.072 g/mol using the atomic weights shown here. A commonly rounded value is 98.07 g/mol.

Why does relative molecular mass have no unit?
It is a ratio comparing molecular mass with a reference mass, so the mass units cancel. Molar mass is a different quantity and is expressed in g/mol.

How many atoms are in one H₂SO₄ molecule?
It contains 2 hydrogen atoms, 1 sulfur atom, and 4 oxygen atoms: 7 atoms in total.

Does sulfuric acid solution have the same molar mass as pure H₂SO₄?
The H₂SO₄ component has the same formula-based molar mass, about 98.072 g/mol. A solution also contains water, so its total mass and concentration cannot be described by sulfuric acid’s molar mass alone.

Related

Formula used
in h | Hydrogen atoms | - | 2 | 0
in s | Sulfur atoms | - | 1 | 0
in o | Oxygen atoms | - | 4 | 0
out mr | Relative molecular mass of sulfuric acid | - | h * 1.008 + s * 32.06 + o * 15.999 | 3
out mm | Molar mass | g/mol | mr | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →