The electron’s charge is −1.602176634 × 10−19 coulomb (C), and the proton’s charge is +1.602176634 × 10−19 C. Their charges have equal magnitude and opposite signs; this exact value is the elementary charge, the basic unit used to describe electric charge in ordinary matter.
Formula
The calculator multiplies the number of particles by the signed elementary charge. In symbols, Q = Nq, where Q is total charge in coulombs (C), N is the number of particles (a count), and q is the charge of one particle in coulombs. For an electron, q = −e; for a proton, q = +e, where the exact elementary-charge constant is e = 1.602176634 × 10−19 C.
The selector assigns a numerical sign factor: 2 × particle choice − 3 gives −1 for Electron=1 and +1 for Proton=2. The first output is the signed total charge, and the second gives the positive magnitude per particle. The calculator assumes all counted particles are the selected type and that their charges add directly.
Worked Example
With the default inputs, the particle count is N = 1 and the selection is p = 1, meaning electron. The sign factor is:
2p − 3 = 2(1) − 3 = −1
Therefore the total charge is:
Q = N × 1.602176634 × 10−19 C × (2p − 3)
Q = 1 × 1.602176634 × 10−19 C × (−1)
Q = −1.602176634 × 10−19 C
The charge magnitude per particle is 1.602176634 × 10−19 C. The displayed total uses ten decimal places, which gives −0.0000000002 C for this example; the underlying value is more informatively written in scientific notation as above.
Assumptions
- The count is a nonnegative whole number of identical particles. Fractional counts are not physically meaningful, even though calculator input fields may accept decimals.
- Each electron or proton carries exactly one elementary charge with the sign shown.
- The calculation finds net charge from the selected particles alone; it does not account for other charged particles or surrounding matter.
What Specific Charge Means
“Specific charge” can mean charge per particle, or in some physics contexts the charge-to-mass ratio, q/m. For an electron or proton, if the question asks for the specific charge in coulombs per particle, the values are simply −e and +e. If it asks for charge-to-mass ratio, mass must also be specified; the units are C/kg, not C. These are related but different quantities.
The electron and proton carry opposite charges of the same magnitude. An electron has one negative elementary charge, while a proton has one positive elementary charge. In an electrically neutral hydrogen atom, one proton and one electron balance: (+e) + (−e) = 0 C. This cancellation concerns charge only; the particles still have mass and other physical properties.
The word “specific” does not mean that the electron’s charge changes according to its speed or location. An isolated electron always has charge −e, and an isolated proton has +e. The sign describes the direction of charge relative to the conventional positive-charge reference, while the magnitude tells how much charge is carried.
Why the Number Is Exact
The coulomb is an SI unit, and since the 2019 revision of the International System of Units, the elementary charge has a fixed defined value: e = 1.602176634 × 10−19 C exactly. Thus the electron’s charge is exactly the negative of that number and the proton’s charge is exactly the positive of it, within the stated particle definitions.
This exactness is a consequence of how SI units are defined, not a claim that every measurement of charge has zero uncertainty. Experiments may measure physical quantities with uncertainties, and real samples may contain mixtures of particles or charge states. The conversion constant itself, however, is exact in SI.
The elementary charge is also useful for translating between a particle count and charge. One coulomb corresponds to about 6.2415 × 1018 elementary charges. Conversely, one mole of singly charged particles carries one Faraday of charge, approximately 96,485 C, with the sign depending on whether the particles are positive or negative. The mole relationship uses Avogadro’s constant, which is exactly 6.02214076 × 1023 particles per mole.
Using Charge in Calculations
For a collection of identical particles, multiply the signed charge of one particle by the number present. For example, three protons have total charge +3e = +4.806529902 × 10−19 C. Four electrons have total charge −4e = −6.408706536 × 10−19 C. If a system contains both kinds, add their signed contributions; do not add only their magnitudes.
A quick method for checking a calculation is:
- Identify the particle and write its sign: electron negative, proton positive.
- Multiply the number of particles by 1.602176634 × 10−19 C.
- Apply the sign, then combine positive and negative contributions algebraically if both are present.
For a mixture containing Np protons and Ne electrons, the net charge is Q = (Np − Ne)e. Equal numbers give zero net charge. A surplus of protons gives positive net charge; a surplus of electrons gives negative net charge.
Common Misconceptions and Comparisons
A frequent mistake is to report both charges as positive. Their magnitudes are equal, but their signs are essential when calculating net charge. Another is to confuse charge with mass: the proton is much heavier than the electron, but both carry one elementary charge in magnitude.
Neutrons have no net electric charge, so they do not contribute to a simple sum of electric charges. However, “neutral” does not mean “made of nothing” or devoid of internal structure. Also, an atom is neutral only when its total positive and negative charges balance; an ion has a net charge because it has gained or lost electrons.
Finally, charge is quantized in units of the elementary charge for ordinary isolated particles and common ions. That does not mean every measured object must show an easily visible step: macroscopic objects contain enormous numbers of charges, and their net charge can be tiny compared with the total positive and negative charge present.
Frequently Asked Questions
What is the charge of an electron?
The electron’s charge is exactly −1.602176634 × 10−19 C. The minus sign indicates negative charge.
What is the charge of a proton?
The proton’s charge is exactly +1.602176634 × 10−19 C, one positive elementary charge.
Do the electron and proton have equal charges?
They have equal charge magnitudes and opposite signs. Their signed charges sum to zero when one of each is considered together.
What is the elementary charge?
It is the positive constant e = 1.602176634 × 10−19 C. A proton carries +e and an electron carries −e.
What does specific charge mean in C/kg?
In that usage, specific charge means charge divided by mass, q/m. It is a charge-to-mass ratio, not the charge per particle; the particle’s mass is needed to calculate it.
Related
Formula used
in n | Number of electrons or protons | particles | 1 | 0 sel p | Particle | Electron=1, Proton=2 out q | Total charge | C | n * 1.602176634e-19 * (2 * p - 3) | 10 out e | Charge magnitude per particle | C | 1.602176634e-19 | 10
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s