Specific heat at constant volume, written as cv or cV, is expressed in joules per kilogram per kelvin (J/(kg·K)) in SI. It tells how much heat energy per unit mass is needed to raise a substance’s temperature by one kelvin while its volume is held constant; this calculator converts a supplied value between common mass-specific units.
Formula
The calculator treats the entered value as a specific heat in J/(kg·K) and converts it to the selected unit by dividing by the number of J/(kg·K) represented by one target unit:
cv,target = cv,SI ÷ conversion factor.
- cv,SI is the input specific heat, in J/(kg·K).
- The conversion factor is the selected unit’s equivalent in J/(kg·K). For example, 1 kJ/(kg·K) = 1000 J/(kg·K), so divide by 1000.
- cv,target is the output, in the selected unit.
A temperature interval of 1 K has the same size as an interval of 1 °C, so J/(kg·K) and J/(kg·°C) have the same numerical value. The calculator’s choices include the exact calorie conversion specified for this page, 1 cal = 4.184 J, and an approximate Btu conversion.
Worked Example
With the default input, cv = 718 J/(kg·K), and the default selection J/(kg·K) has a factor of 1:
718 ÷ 1 = 718.000 J/(kg·K).
To express the same value in kJ/(kg·K), select that unit, whose factor is 1000:
718 ÷ 1000 = 0.718 kJ/(kg·K).
The underlying property has not changed. Only its numerical representation changes with the unit.
What Specific Heat at Constant Volume Means
Specific heat capacity describes the heat needed to change the temperature of a unit mass. The phrase “at constant volume” specifies a constrained thermodynamic process: the material’s volume does not change as energy is supplied. In differential form, the mass-specific heat at constant volume is commonly defined as cv = (1/m)(∂U/∂T)V, where U is internal energy, T is absolute temperature, and m is mass. This definition applies locally when the property varies with temperature or other conditions.
For an ideal gas, heating at fixed volume does no boundary expansion work, so added heat changes internal energy. For a real substance, the precise relationship depends on its state and thermodynamic behavior. Specific heat is therefore a material property under stated conditions, not a universal constant for every sample or temperature.
Common Units and Conversions
The SI unit is J/(kg·K). Other unit systems are common in engineering, chemistry, and reference tables. The numerator is energy; the denominator includes mass and a temperature interval. Keep track of all three when converting.
- 1 kJ/(kg·K) = 1000 J/(kg·K).
- 1 J/(g·K) = 1000 J/(kg·K), because 1 kg = 1000 g.
- 1 cal/(g·°C) = 4184 J/(kg·K), using 1 cal = 4.184 J and 1 g = 0.001 kg.
- 1 Btu/(lb·°F) is approximately 4186.8 J/(kg·K); the exact conversion depends on which Btu definition is used.
For example, a table value of 0.718 kJ/(kg·K) is equivalent to 718 J/(kg·K). A value in J/(g·K) is numerically larger than the corresponding value in J/(kg·K) by a factor of 1000. That reversal often causes conversion mistakes.
Using the Calculator and Interpreting Results
Enter the specific heat value in J/(kg·K), then choose the unit you want. The output is a unit conversion only; it does not estimate or identify the substance’s heat capacity. The default, 718 J/(kg·K), is a representative approximate value often used for air near ordinary room conditions, not a universal value for air at every temperature, pressure, or composition.
To estimate heat transferred in a simple process where specific heat is treated as constant, use:
Q = m cv ΔT,
where Q is heat energy in joules, m is mass in kilograms, cv is in J/(kg·K), and ΔT is the temperature change in kelvins or degrees Celsius. This relation is an approximation when heat capacity changes noticeably over the temperature range. The conversion calculator alone does not calculate Q; it supplies equivalent units for the property.
Constant Volume Compared with Constant Pressure
Specific heat at constant pressure is written cp, and it uses the same unit dimensions as cv: J/(kg·K). The units do not tell you which process or property a value represents; the subscript and source conditions matter.
For an ideal gas, cp exceeds cv because heating at constant pressure allows expansion and requires energy for work as well as for increasing internal energy. For an ideal gas on a molar basis, the difference is Cp − Cv = R, where R is the molar gas constant. On a mass basis, the corresponding difference is the specific gas constant. Do not apply this ideal-gas relation indiscriminately to liquids, solids, or real gases.
Assumptions and Common Mistakes
- Check the subscript. A table may list cp rather than cv; both share units but describe different conditions.
- Distinguish specific from molar heat capacity. Specific heat is per mass, such as J/(kg·K). Molar heat capacity is per amount of substance, such as J/(mol·K). They cannot be interchanged without the molar mass.
- Use a temperature difference, not a temperature reading. A change of 1 K equals a change of 1 °C. Converting an absolute temperature between Celsius and kelvin requires adding 273.15, but converting a temperature interval does not.
- Record the conditions. Values can depend on temperature, pressure, phase, composition, and the convention or reference source. Near a phase transition, a single constant value may be unsuitable.
- Watch unit definitions and rounding. Calorie and Btu values can depend on the adopted definition. Retain enough significant figures during conversions and round only for the precision justified by the source data.
The conversion assumes the input is a valid mass-specific heat already stated in J/(kg·K), and that the selected factor is appropriate for the listed unit. It does not account for temperature dependence, pressure dependence, phase changes, or measurement uncertainty. Consult a property table or equation of state for the substance and conditions of interest.
Frequently Asked Questions
What is the SI unit of specific heat at constant volume?
The SI unit is joules per kilogram per kelvin, written J/(kg·K). The equivalent expression J/(kg·°C) gives the same numerical value for temperature intervals.
Is J/(kg·K) the same unit as J/(mol·K)?
No. J/(kg·K) is per unit mass, while J/(mol·K) is per mole. Convert between them using the substance’s molar mass, with consistent units.
Are the units for cv and cp different?
No. Both use energy per mass per temperature interval, commonly J/(kg·K). Their physical definitions differ because one is measured at constant volume and the other at constant pressure.
Can I use Celsius instead of kelvin?
For a temperature change, yes: a change of 1 °C equals a change of 1 K. For absolute temperatures in thermodynamic equations, use kelvin.
Does specific heat at constant volume stay constant?
Not necessarily. It can vary with temperature and, for real materials, with pressure, phase, and composition. Treating it as constant is an approximation valid only when its variation is small enough for the calculation.
Related
Formula used
in cv | Specific heat at constant volume | J/(kg·K) | 718 | 0 sel unit | Convert to | J/(kg·K)=1, kJ/(kg·K)=1000, J/(g·K)=1000, cal/(g·°C)=4184, Btu/(lb·°F)=4186.8 out cvout | Specific heat at constant volume | selected unit | cv / unit | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s