molecalculator

Moles & Molar Mass

Temperature K to Celsius: How to Convert

Calculator No. 01-9371 · Updated · Formula and assumptions shown below

Temperature in Celsius 27.00 °C
Temperature in kelvin
300.15 K
Set in the form below
You enter
Temperature in kelvin (K)
You get
Temperature in Celsius (°C)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

To convert a temperature from kelvin (K) to degrees Celsius (°C), subtract 273.15 from the kelvin value. The formula is °C = K − 273.15. For example, 300 K equals 26.85 °C.

Formula

The conversion uses a simple linear relationship between the kelvin and Celsius scales:

°C = K − 273.15

Where:

  • K = temperature in kelvin (K)
  • °C = temperature in degrees Celsius (°C)

The constant 273.15 is the difference between the zero points of the two scales. The kelvin scale starts at absolute zero (0 K), while the Celsius scale starts at the freezing point of water (0 °C). Absolute zero is −273.15 °C, so adding 273.15 to a Celsius value gives kelvin, and subtracting 273.15 from kelvin gives Celsius.

Worked Example

Using the default value from the calculator above (300.15 K):

  1. Start with the kelvin temperature: 300.15 K
  2. Subtract 273.15: 300.15 − 273.15 = 27.00
  3. The result is 27.00 °C

The calculator shows 27.00 °C, matching the manual calculation.

Assumptions

  • The conversion is exact by definition of the SI unit system.
  • No rounding is applied to the constant 273.15.
  • The result is reported to two decimal places, which is sufficient for most scientific and everyday purposes.

Why the Kelvin Scale Exists

Kelvin is the SI base unit of thermodynamic temperature. It was created so that temperature measurements have a true zero point — absolute zero — where molecular motion theoretically stops. Unlike Celsius or Fahrenheit, kelvin is an absolute scale with no negative numbers. This makes it essential in physics and chemistry equations, such as the ideal gas law (PV = nRT), where using Celsius would produce incorrect results because the scale does not start at zero.

The Celsius scale, by contrast, is a relative scale based on the freezing (0 °C) and boiling (100 °C) points of water at standard atmospheric pressure. It is convenient for everyday weather and cooking, but its zero point is arbitrary. The kelvin scale was designed so that one kelvin increment equals one degree Celsius increment, making conversion a simple addition or subtraction.

How to Convert Without a Calculator

For quick mental estimates, you can round 273.15 to 273. This introduces an error of only 0.15 K (0.27 °F), which is negligible for most non-laboratory purposes. For example:

  • 300 K ≈ 300 − 273 = 27 °C (exact: 26.85 °C)
  • 0 K ≈ −273 °C (exact: −273.15 °C)
  • 373 K ≈ 100 °C (exact: 99.85 °C) — note that the boiling point of water is 373.15 K, so rounding gives 100 °C.

If you need precision, always use 273.15. The difference matters in scientific work, especially when measuring temperature differences or calibrating instruments.

Common Mistakes and Misconceptions

One frequent error is forgetting the decimal .15 and using 273 instead of 273.15. This shifts the result by 0.15 °C, which can be significant in precise measurements. Another mistake is confusing the conversion direction: to go from Celsius to kelvin, you add 273.15; to go from kelvin to Celsius, you subtract. Mixing these up is easy when you are in a hurry.

A related misconception is that kelvin is measured in “degrees kelvin.” The correct unit is simply “kelvin” (symbol K), not “degrees Kelvin” or “°K.” This was standardized in 1967. You should also avoid writing a degree symbol with K (e.g., 300 °K is wrong; write 300 K).

Another confusion arises with temperature differences. A change of 1 K is exactly equal to a change of 1 °C, so when you are calculating a difference (e.g., ΔT), you do not add or subtract 273.15. Only absolute temperatures require the offset.

Practical Examples in Science and Daily Life

In a chemistry lab, you might measure a reaction temperature of 298 K (room temperature). Converting to Celsius: 298 − 273.15 = 24.85 °C. This is often the standard “room temperature” used in thermodynamic tables.

In physics, the cosmic microwave background radiation has a temperature of about 2.725 K. In Celsius, that is 2.725 − 273.15 = −270.425 °C. This is just above absolute zero.

In everyday life, you rarely see kelvin except in lighting. Light bulbs are labeled with a color temperature in kelvin (e.g., 3000 K for warm white, 5000 K for daylight). Converting those values to Celsius gives 2726.85 °C and 4726.85 °C, respectively — but note that color temperature is not the physical temperature of the bulb surface; it describes the color of light emitted by an ideal black body radiator.

Frequently Asked Questions

What is absolute zero in Celsius?
Absolute zero is 0 K, which equals −273.15 °C. It is the lowest possible temperature, where particles have minimal thermal motion.

Is 1 K equal to 1 °C?
Yes, a change of 1 kelvin is exactly equal to a change of 1 degree Celsius. The two scales have the same increment size; only their zero points differ.

Why do scientists use kelvin instead of Celsius?
Because kelvin is an absolute scale starting at zero, it makes equations like the ideal gas law and thermodynamic calculations simpler and more accurate. Using Celsius would require adding 273.15 in formulas, which is error-prone.

Can kelvin be negative?
No. The kelvin scale is absolute, and 0 K is the lowest possible temperature. Negative kelvin values are physically meaningless.

How do I convert Celsius to kelvin?
Add 273.15 to the Celsius value. For example, 25 °C + 273.15 = 298.15 K.

Is the boiling point of water exactly 373.15 K?
Yes, at standard atmospheric pressure (1 atm), pure water boils at 100 °C, which is 373.15 K. However, the boiling point changes with altitude and pressure.

Related

Formula used
in k | Temperature in kelvin | K | 300.15 | 0
out c | Temperature in Celsius | °C | k - 273.15 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →