This calculator converts between common vacuum pressure units: torr, millibar, pascal, and inches of mercury (inHg). You enter a pressure value in any of these units, and you get the equivalent value in all the others, plus a rough vacuum level description. It is designed for lab and industrial work, not for medical or clinical use.
Formula
The conversion is based on the definition of each unit relative to standard atmospheric pressure:
- 1 atm = 760 torr = 1013.25 mbar = 101325 Pa = 29.9213 inHg
- 1 torr = 1 mmHg (approximately, at 0 °C and standard gravity)
- 1 mbar = 100 Pa
- 1 inHg = 25.4 torr (exactly, because 1 inch = 25.4 mm)
So, to convert from torr to millibar: mbar = torr × 1013.25 / 760 = torr × 1.33322. To convert to pascal: Pa = torr × 101325 / 760 = torr × 133.322. To convert to inHg: inHg = torr / 25.4.
Worked Example
Suppose you enter a pressure of 1 torr (the default). The calculator computes:
- Torr: 1.00 torr
- Millibar: 1 × 1.33322 = 1.333 mbar
- Pascal: 1 × 133.322 = 133.322 Pa
- Inches of mercury: 1 / 25.4 = 0.0394 inHg
- Vacuum level: since 1 torr is between 0.001 and 1, it is classified as “Medium” vacuum.
These match the calculator’s outputs exactly.
Assumptions
- The torr is taken as exactly 1/760 of a standard atmosphere, which is the current definition.
- Inches of mercury are converted using the exact relation 1 inHg = 25.4 torr, assuming mercury density and standard gravity.
- No temperature or gas composition effects are considered; these are pressure unit conversions, not physical state calculations.
When to Use This Calculator
Use this tool whenever you need to compare pressures from different sources: a vacuum pump spec in mbar, a gauge reading in inHg, a protocol in torr, or a datasheet in Pa. It is especially handy in lab work, where older literature uses torr, newer instruments display mbar or Pa, and some equipment (especially in the US) uses inHg.
For example, a lyophilizer might require a vacuum below 100 mtorr (0.1 torr). If your pump’s spec says 0.05 mbar, you can quickly see that 0.05 mbar = 0.0375 torr, which is below the requirement. Similarly, a rotary evaporator often works at 10-20 torr, which is about 13-27 mbar.
How to Read the Result
The first output is the value in torr, which is the base unit for the conversions. The other outputs show the equivalent in mbar, Pa, and inHg. The vacuum level label is a rough guide, not a precise classification:
- Rough vacuum: 760 to 100 torr (atmosphere to about 0.13 atm)
- Medium vacuum: 100 to 1 torr
- High vacuum: 1 to 0.001 torr
- Ultra-high vacuum: below 0.001 torr
Note that the label is only a convenience; the exact numeric value is what matters for your process.
Common Mistakes and Pitfalls
- Confusing torr and mmHg: they are nearly identical (1 torr = 1 mmHg at 0 °C), but not exactly the same in all contexts. For practical lab work, the difference is negligible.
- Mixing absolute and gauge pressure: vacuum is usually measured as absolute pressure (relative to a perfect vacuum), not gauge pressure (relative to atmosphere). This calculator assumes absolute pressure. If your gauge reads “-25 inHg”, that is gauge pressure; convert to absolute by subtracting from 29.92 inHg (standard atmosphere).
- Forgetting that 1 atm = 1013.25 mbar, not 1000 mbar. The difference is about 1.3%.
- Using inHg without specifying the temperature: the density of mercury changes with temperature, but for most conversions the standard value is used.
Limits of the Formula
This conversion is purely a unit conversion; it does not account for gas properties, temperature, or altitude. At high altitudes, atmospheric pressure is lower, so a gauge reading of “0 inHg” does not mean a perfect vacuum. Also, the vacuum level labels are approximate and vary by industry; for example, the semiconductor industry uses different thresholds than general lab work.
For accurate vacuum system design, you also need to consider pump speed, conductance, and outgassing, which are beyond this calculator.
Alternatives and Related Calculations
If you need to convert between other pressure units like psi, kPa, or bar, the same principles apply: use the exact conversion factors. For example, 1 psi = 51.7149 torr, 1 bar = 750.062 torr, 1 kPa = 7.50062 torr. You can extend the calculator by adding more inputs, but the four units here cover most lab and industrial needs.
For vacuum pump selection, you might also want to calculate the flow rate at different pressures, but that requires the pump’s performance curve. For gas law calculations involving vacuum, use the ideal gas law with the pressure in consistent units (e.g., Pa or torr).
Frequently Asked Questions
What is the difference between torr and mmHg?
Historically, 1 torr was defined as 1/760 of an atmosphere, and 1 mmHg was the pressure exerted by a 1 mm column of mercury. They are so close that for practical purposes they are interchangeable (1 torr ≈ 1.00000014 mmHg). The difference is less than 0.0002%, so you can treat them as equal in lab work.
Why do some vacuum gauges read in inches of mercury?
Inches of mercury (inHg) is a legacy unit from mercury manometers, which are simple and accurate. Many US-made vacuum pumps and gauges still use inHg, especially in HVAC and automotive applications. To convert to torr, multiply inHg by 25.4.
Can I use this calculator for high vacuum pressures like 10⁻⁶ torr?
Yes, the calculator works for any positive pressure. For 10⁻⁶ torr, it will show 1.33 × 10⁻⁶ mbar and 1.33 × 10⁻⁴ Pa. The vacuum level label will say “Ultra-high” for anything below 0.001 torr. However, note that at such low pressures, the type of gauge (e.g., ionization gauge) matters more than unit conversion.
What is the relationship between mbar and Pa?
1 mbar is exactly 100 Pa. So to convert mbar to Pa, multiply by 100; to convert Pa to mbar, divide by 100. This is a simple decimal shift, but it’s easy to forget when you’re in a hurry.
Is 0 inHg equal to a perfect vacuum?
No. In absolute terms, 0 inHg would be a perfect vacuum, but many gauges read 0 at atmospheric pressure and show negative values for vacuum (e.g., -29.92 inHg is a perfect vacuum). This calculator uses absolute pressure, so if your gauge reads -25 inHg, you should enter 29.92 – 25 = 4.92 inHg as the absolute pressure.
Why does the calculator show “No vacuum” for pressures above 760 torr?
Because 760 torr is standard atmospheric pressure. Pressures above that are not vacuum, they are positive pressure. The label is just a convenience; the numeric conversion is still valid for any pressure value.
Related
Formula used
in p | Pressure value | - | 1 | 0 sel u | Unit of input | torr=1, mbar=2, Pa=3, inHg=4 out torr | Torr | torr | p * (u==1 ? 1 : u==2 ? 0.750062 : u==3 ? 0.00750062 : 25.4) | 2 out mbar | Millibar | mbar | torr * 1.33322 | 2 out pa | Pascal | Pa | torr * 133.322 | 2 out inhg | Inches of mercury | inHg | torr / 25.4 | 3 out level | Vacuum level | - | torr > 760 ? "No vacuum" : torr > 100 ? "Rough" : torr > 1 ? "Medium" : torr > 0.001 ? "High" : "Ultra-high" | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- QPP Calculator Canada: How It Works & How to Use It
- PPP Calculator World Bank: How It Works & How to Use It2,000.00
- PPP Calculator: India vs USA Cost Comparison1,000.00 USD
- PPP Calculator USD to INR: How It Works2,335 INR
- PPP Calculator India vs UK: Real Cost Comparison103.63 GBP
- PPP Calculator India vs Dubai: Real Cost Comparison8,954.58 AED