In chemical kinetics, r most often denotes the reaction rate, but its meaning depends on the equation and textbook: it can also be a symbol for a rate constant or a stoichiometric rate. This calculator finds the average rate of change in a measured concentration, using the concentration and time at the start and end of an interval.
Formula
For a reactant that is consumed, the average disappearance rate is r = (c1 − c2) / (t2 − t1). Here, c1 and c2 are the reactant concentrations at the initial and final times, in mol/L; t1 and t2 are those times, in seconds; and r is in mol/(L·s). The calculator requires t2 to be greater than t1; equal or reversed times cannot define this average rate.
The positive disappearance-rate convention is convenient when describing a reactant’s consumption. The signed concentration change per time is instead Δ[A]/Δt = (c2 − c1)/(t2 − t1), which is negative as a reactant is consumed. The two report the same change with opposite signs.
Worked Example
Using the calculator’s default values, the concentration falls from 1 mol/L at 0 s to 0.5 mol/L at 10 s.
- Concentration decrease: 1 − 0.5 = 0.5 mol/L.
- Elapsed time: 10 − 0 = 10 s.
- Average disappearance rate: 0.5 / 10 = 0.05000 mol/(L·s).
The calculated average rate is 0.0500 mol/(L·s), rounded to four decimal places as configured. It is an average over the full interval, not the rate at every moment.
Assumptions
- The concentration values refer to the same reactant and use mol/L.
- The time values use seconds and increase from the initial to the final measurement.
- The output is an average disappearance rate; it does not assume a reaction mechanism or a constant instantaneous rate.
- For bench measurements, follow your lab method, the safety data sheet (SDS) and your supervisor.
What r Means in a Rate Law
A common rate law is r = k[A]m[B]n. In this expression, r is the reaction rate, k is the rate constant, [A] and [B] are reactant concentrations, and m and n are experimentally determined reaction orders. These orders describe how the measured rate responds to concentration changes under specified conditions. They are not generally the same as coefficients in the balanced chemical equation.
This page’s calculator estimates r from two concentration measurements over time. It does not calculate k or reaction order. To determine those, a suitable kinetic model and additional rate measurements are needed. For example, if doubling [A] while holding other conditions constant makes the rate double, that observation is consistent with first order in A; if the rate quadruples, it is consistent with second order in A. Such patterns must be established from data rather than assumed from the equation’s coefficients.
There is also a distinction between reaction rate and the rate at which an individual species changes. For a reaction written aA → bB, the normalized reaction rate is r = −(1/a)d[A]/dt = (1/b)d[B]/dt. The stoichiometric coefficients make the rate calculated from A agree with the rate calculated from B. The calculator reports the disappearance rate of one reactant without dividing by its reaction coefficient.
How to Interpret and Use the Result
The result describes the average concentration decrease per second during the selected interval. For 0.0500 mol/(L·s), the concentration decreased by an average of 0.0500 mol/L each second across that interval. It does not mean the reaction maintained that rate at all times: many reactions slow as reactants are depleted, while temperature, catalysts, mixing, or other changing conditions can alter the rate.
Use measurements from the beginning and end of the interval that match in substance, concentration units, and time units. If the concentration is reported in mmol/L, convert it to mol/L before entering it: 1 mmol/L = 0.001 mol/L. If time is in minutes, convert it to seconds by multiplying by 60. Consistent units are essential because the calculator does not infer or convert units.
For product formation, a positive average formation rate is (c2 − c1)/(t2 − t1). If the product concentration rises, entering it as though it were a disappearing reactant would give a negative result in the signed-change convention, or an unsuitable positive value under the calculator’s disappearance formula. Choose a formula that matches the species and convention being reported.
Common Confusions and Limitations
- r versus k: r is commonly the rate; k is commonly the rate constant. Their units differ and k depends on the rate-law form and reaction order.
- Rate versus reaction order: r is not a universal symbol for reaction order. Orders are often written m and n, though notation varies between sources.
- Positive versus negative signs: a reactant’s concentration derivative is negative during consumption. Reporting its disappearance rate with a leading minus sign makes the rate positive.
- Average versus instantaneous rate: two measurements give an average. An instantaneous rate is the slope of a concentration-versus-time curve at a particular time, generally estimated from closely spaced data or a fitted model.
- Rounding and measurement quality: extra displayed digits do not make imprecise measurements more accurate. Report a result in keeping with the precision and uncertainty of the input data.
As the time interval becomes shorter, the average rate may better approximate the instantaneous rate near that interval, provided the measurements are reliable. But very short intervals can magnify measurement noise. A graph or kinetic fit can be more informative when the concentration changes substantially or measurements fluctuate.
Frequently Asked Questions
What is the value of r in chemical kinetics?
There is no single fixed value. When r denotes reaction rate, its value is calculated from concentration change over time or from a rate law using measured conditions and a suitable rate constant.
Is r the rate constant?
Usually not in the common notation: r denotes reaction rate and k denotes the rate constant. Symbols vary, so check how a particular source defines them.
What units does r have?
For a concentration-based rate, common units are mol/(L·s), also written M/s. The units can differ if concentration or time is expressed in other units.
Why is the rate of a reactant negative?
The signed derivative d[A]/dt is negative when [A] decreases. The positive disappearance rate is defined as −d[A]/dt, or as a positive finite-interval decrease divided by elapsed time.
Can this calculator find reaction order?
No. It calculates an average concentration disappearance rate from two measurements. Reaction order requires rate measurements across experiments with deliberately varied concentrations and an appropriate analysis.
Related
Formula used
in c1 | Initial concentration | mol/L | 1 | 0 in c2 | Final concentration | mol/L | 0.5 | 0 in t1 | Initial time | s | 0 | 0 in t2 | Final time | s | 10 | 0 out r | Average disappearance rate | mol/(L·s) | (c1 - c2) / (t2 - t1) | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Serial Dilution Calculation Examples0.2000 mol/L
- Serial Dilution: How It Works & Why It Matters1.000 × 10−5 mol/L
- Serial Dilution A Level Biology: How To Do It30
- Serial vs Simple Dilution: Key Differences0.2000 mol/L
- qPCR Serial Dilution Standard Curve: How to Build One100,000 copies/µL
- Milton Tablet Dilution: Mixing Guide0.2000 mol/L