molecalculator

Moles & Molar Mass

Proton vs Neutron: Mass, Charge & Role in Atoms

Calculator No. 01-8043 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This page explains what protons and neutrons are, how they differ in charge, mass, and stability, and why their numbers define an element and its isotopes. You’ll learn the standard definitions, the role of quarks and gluons, and how protons and neutrons behave inside the nucleus. Use the calculator below to convert between mass and energy for a single proton or neutron, a useful check for nuclear binding energy problems.

Formula

The energy equivalent of a particle’s rest mass is given by Einstein’s mass–energy relation:

E = m × c2

where:

  • E = energy (joules, J)
  • m = rest mass (kilograms, kg)
  • c = speed of light in vacuum = 299,792,458 m/s

In nuclear physics, masses are usually given in atomic mass units (u), where 1 u = 1.66053906660 × 10−27 kg. The conversion factor used in the calculator is:

1 u = 931.49410242 MeV/c2

So the energy equivalent in MeV is simply the mass in u multiplied by 931.49410242. The calculator also shows the energy in joules using the exact conversion 1 u = 1.49241808560 × 10−10 J.

Worked Example

Using the default values from the calculator (proton, m = 1.007276 u):

  1. Convert mass to energy in MeV: 1.007276 × 931.49410242 = 938.272 MeV (rounded to 6 decimal places: 938.272046)
  2. Convert mass to energy in joules: 1.007276 × 1.49241808560 × 10−10 = 1.503277 × 10−10 J

The calculator gives the same results: 938.272046 MeV and 1.503277 × 10−10 J. The neutron default (1.008664 u) gives 939.565 MeV.

Assumptions

  • The particle is at rest (rest mass energy).
  • The atomic mass unit is the unified atomic mass unit (u), defined as 1/12 of the mass of a carbon-12 atom.
  • No binding energy is included – this is for a free proton or neutron, not one bound in a nucleus.

What Is a Proton?

A proton is a subatomic particle with a positive electric charge of +1 elementary charge (approximately +1.602 × 10−19 C) and a rest mass of 1.007276 u (about 1.6726 × 10−27 kg). It is one of the two main components of an atomic nucleus; the number of protons in a nucleus defines the atomic number (Z) and therefore the element. For example, any atom with 6 protons is carbon, and any atom with 92 protons is uranium.

Protons are classified as baryons, meaning they are made of three quarks – specifically two up quarks and one down quark – held together by the strong nuclear force, mediated by gluons. The proton’s charge arises from the fractional charges of its quarks: up quarks have +2/3 e and down quarks have −1/3 e, giving a total of +1 e.

In a neutral atom, the number of protons equals the number of electrons. Removing or adding electrons creates ions, but changing the number of protons transforms the element itself – that is nuclear chemistry, not ordinary chemistry.

What Is a Neutron?

A neutron is a subatomic particle with no electric charge (neutral) and a slightly larger rest mass than the proton: 1.008664 u (about 1.6749 × 10−27 kg). It is also a baryon, composed of one up quark and two down quarks, giving a total charge of 0. Neutrons are bound with protons in the nucleus by the strong force.

Neutrons are essential for nuclear stability. Because protons repel each other electrically, neutrons add an attractive strong-force contribution without adding electrostatic repulsion. Heavier elements need a higher neutron-to-proton ratio to remain stable. For example, carbon-12 has 6 protons and 6 neutrons (ratio 1:1), while uranium-238 has 92 protons and 146 neutrons (ratio about 1.59:1).

A free neutron (outside a nucleus) is unstable, with a mean lifetime of about 879 seconds (roughly 14.7 minutes). It decays into a proton, an electron, and an antineutrino via the weak nuclear force. Bound neutrons inside a stable nucleus do not decay because energy conservation forbids it – the decay products would have higher total mass.

Key Differences: Charge, Mass, and Stability

The table below summarizes the most important contrasts:

  • Charge: Proton +1 e; neutron 0.
  • Mass: Neutron is about 0.1% heavier (1.008664 u vs 1.007276 u). This small difference is why a free neutron can decay into a proton plus lighter particles.
  • Quark content: Proton = uud; neutron = udd.
  • Stability: Free protons are stable (no observed decay); free neutrons decay with a half-life of about 10 minutes.
  • Role in atom: Protons define the element; neutrons define the isotope and add nuclear binding.

This mass difference is also why nuclear fusion of hydrogen to helium releases energy – the helium nucleus is lighter than the sum of its parts, and that mass deficit is converted to energy.

How Protons and Neutrons Hold the Nucleus Together

The nucleus is held together by the residual strong force, a spillover of the strong force that binds quarks. This force is short-range (about 1–3 femtometers) and attractive between protons and neutrons. Without it, the electric repulsion between protons would blow the nucleus apart.

Nuclear binding energy is the energy required to separate a nucleus into its individual protons and neutrons. It is calculated from the mass difference between the nucleus and its constituents, using E = mc2. For example, a helium-4 nucleus (2 protons + 2 neutrons) has a mass of 4.002603 u, while the sum of its parts is 2 × 1.007276 + 2 × 1.008664 = 4.031880 u. The difference is 0.029277 u, corresponding to about 27.3 MeV of binding energy. This is the energy released when two protons and two neutrons fuse to form helium.

The binding energy per nucleon peaks around iron-56, which is why fusion of lighter elements and fission of heavier elements both release energy.

Isotopes and Atomic Mass

Isotopes are atoms of the same element (same number of protons) that have different numbers of neutrons. For instance, hydrogen has three naturally occurring isotopes:

  • Protium (¹H): 1 proton, 0 neutrons
  • Deuterium (²H): 1 proton, 1 neutron
  • Tritium (³H): 1 proton, 2 neutrons (radioactive)

The atomic mass listed on the periodic table is a weighted average of all naturally occurring isotopes. For carbon, the standard atomic weight is 12.011 u because of small amounts of carbon-13 and carbon-14. This is why atomic masses are not whole numbers.

Common Misconceptions

One common error is thinking that protons and neutrons are fundamental particles. They are not – they are made of quarks. Another misconception is that the neutron is a proton plus an electron. While the neutron decays into a proton, electron, and antineutrino, it is not a bound state of those particles inside the nucleus. The neutron’s quark composition (udd) is distinct from the proton’s (uud).

Also, many people believe the strong force only acts between quarks. In fact, the residual strong force acts between nucleons (protons and neutrons) themselves, which is what binds the nucleus. This is analogous to how van der Waals forces are residual electromagnetic forces between neutral atoms.

Frequently Asked Questions

Which is heavier, a proton or a neutron?

A neutron is slightly heavier than a proton. The neutron’s rest mass is 1.008664 u, while the proton’s is 1.007276 u – a difference of about 0.001388 u (about 1.3 MeV/c²). This difference is small but crucial for the neutron’s ability to decay into a proton.

Why is a neutron neutral if it contains quarks with charges?

The neutron contains one up quark (+2/3 e) and two down quarks (−1/3 e each). The sum is +2/3 − 1/3 − 1/3 = 0. The charges cancel exactly, so the overall particle has zero net charge.

Can a proton turn into a neutron?

Yes, in certain nuclear processes such as electron capture or positron emission (beta-plus decay). For example, a proton can absorb an electron and become a neutron, releasing a neutrino. This happens in nuclei that have too many protons relative to neutrons.

What is the difference between atomic number and mass number?

Atomic number (Z) is the number of protons in the nucleus – it defines the element. Mass number (A) is the total number of protons plus neutrons. For example, carbon-14 has Z=6 and A=14, so it has 8 neutrons.

Why do neutrons help stabilize the nucleus?

Neutrons contribute to the attractive strong force between nucleons without adding electrostatic repulsion. Adding neutrons increases the short-range attraction that holds the nucleus together, counteracting the long-range electric repulsion between protons. Too many or too few neutrons leads to instability and radioactive decay.

Are protons and neutrons the same size?

Their sizes are very similar, with a root-mean-square charge radius of about 0.84 fm for the proton and about 0.85 fm for the neutron (though the neutron’s charge distribution is more complex, with a positive core and negative outer region). For most purposes, they are treated as identical in size.

For lab work involving nuclear masses or binding energy, always use precise values from a reliable table. The calculator above gives the energy equivalent for a free proton or neutron, which is a building block for such calculations. Follow your lab method, the safety data sheet (SDS) and your supervisor when handling radioactive materials or performing nuclear experiments.

Related

Formula used
in m | Mass of particle | u | 1.007276 | 0
sel p | Particle | Proton=1.007276, Neutron=1.008664
out e | Energy equivalent | MeV | p * 931.49410242 | 6
out em | Energy equivalent | J | p * 1.49241808560e-10 | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →