molecalculator

Moles & Molar Mass

Ethanol in Chemistry: Structure, Properties, Uses

Calculator No. 01-9027 · Updated · Formula and assumptions shown below

Molarity 0.2537 mol/L
Concentration in millimolar
253.70 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
46.07 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator helps you prepare ethanol solutions of a desired molarity. You enter the mass of ethanol (or any solute), its molar mass, and the final solution volume, and the calculator returns the molarity in mol/L and in millimolar. Use it for lab prep, dilutions, or checking a recipe’s concentration.

Formula

Molarity (C) is the amount of solute in moles divided by the volume of solution in liters:

C = (m / M) / (V / 1000)

  • m = mass of solute in grams (g)
  • M = molar mass of solute in grams per mole (g/mol)
  • V = final solution volume in milliliters (mL), converted to liters by dividing by 1000
  • C = molarity in moles per liter (mol/L, often written M)

For ethanol, the molar mass is 46.07 g/mol (C2H5OH: 2×12.011 + 6×1.008 + 15.999 = 46.069, rounded to 46.07). This is the mass of one mole of ethanol molecules.

Worked Example

Using the default values: you dissolve 2.922 g of ethanol (M = 46.07 g/mol) in enough water to make 250 mL of solution.

  1. Convert volume to liters: 250 mL / 1000 = 0.250 L
  2. Calculate moles of ethanol: 2.922 g / 46.07 g/mol = 0.06343 mol (rounded to 5 significant figures)
  3. Divide moles by volume: 0.06343 mol / 0.250 L = 0.2537 mol/L

The calculator gives 0.2537 mol/L (rounded to 4 decimals) and 253.7 mM. That means the solution contains 0.2537 moles of ethanol per liter of final solution.

Assumptions

  • The solute is pure ethanol (no water or impurities).
  • The final volume is the total solution volume after mixing, not the volume of solvent added.
  • The solution is at room temperature (density changes with temperature are ignored for molarity).
  • No chemical reaction occurs; ethanol simply dissolves in water.

What Is Ethanol in Chemistry?

Ethanol (also called ethyl alcohol, grain alcohol, or simply alcohol) is a colorless, volatile liquid with the chemical formula CH3CH2OH or C2H5OH. It is a primary alcohol: the hydroxyl group (–OH) is attached to a carbon that is bonded to only one other carbon. In IUPAC nomenclature, its name is ethanol, derived from the parent alkane ethane (C2H6) with the suffix “-ol” indicating the presence of a hydroxyl group.

Ethanol is one of the simplest alcohols and is the active ingredient in alcoholic beverages. In chemistry, it serves as a solvent, a fuel, a disinfectant, and a reagent in countless reactions. Its structure—a two-carbon chain with a polar –OH group and a nonpolar ethyl group—makes it miscible with water in all proportions and also soluble in many nonpolar organic solvents.

Physical and Chemical Properties

Ethanol has a set of well-defined physical properties that are important in the lab:

  • Molar mass: 46.07 g/mol
  • Density: 0.789 g/cm³ at 20 °C (lighter than water)
  • Boiling point: 78.37 °C at 1 atm
  • Melting point: –114.1 °C
  • Flash point: 13 °C (closed cup) – highly flammable
  • Vapor pressure: 5.95 kPa at 20 °C (volatile)
  • pKa: about 16 (the hydroxyl hydrogen is weakly acidic)

Chemically, ethanol is a weak acid (weaker than water) and a weak base (the oxygen can accept a proton). It undergoes oxidation to acetaldehyde (ethanal) then to acetic acid (ethanoic acid). It reacts with carboxylic acids to form esters, with alkali metals to form alkoxides, and with hydrogen halides to form haloethanes. Dehydration of ethanol over an acid catalyst yields ethene (ethylene).

Production and Sources

Ethanol is produced industrially by two main routes:

  • Fermentation: Yeast metabolizes sugars (glucose, fructose, sucrose) from crops like corn, sugarcane, or wheat, producing ethanol and carbon dioxide. The fermentation broth typically contains 10–15% ethanol by volume; it is then concentrated by distillation.
  • Hydration of ethene: Ethene (from petroleum or natural gas) reacts with steam in the presence of a phosphoric acid catalyst at high temperature and pressure, yielding ethanol directly.

Most fuel ethanol is made by fermentation, while industrial ethanol for solvents may come from either route. The ethanol used in laboratories is often denatured—mixed with small amounts of methanol, isopropanol, or other additives to make it unfit for drinking, avoiding beverage taxes.

Common Uses in Chemistry and Industry

Ethanol is one of the most versatile solvents in the lab. Its uses include:

  • Solvent: Dissolves many organic compounds and is miscible with water, making it a common medium for reactions, recrystallizations, and extractions.
  • Disinfectant: 70% ethanol solutions are used as antiseptics because they denature proteins and disrupt cell membranes.
  • Fuel: Blended with gasoline (E10, E85) or used in pure form in racing and some vehicles.
  • Reagent: In esterification, oxidation, and as a source of ethoxide ions.
  • Preservative: In biological specimens and as a component of tinctures.
  • Standard in analytical chemistry: For calibration in chromatography and spectroscopy.

Because it is cheap, relatively low-toxicity, and evaporates quickly, ethanol is often the first choice for cleaning and degreasing in labs.

Safety and Handling

Ethanol is flammable and volatile. Keep it away from open flames, sparks, and hot surfaces. Work in a fume hood when handling large volumes. Ethanol is also hygroscopic—it absorbs water from the air—so keep containers tightly sealed. In the body, ethanol is a central nervous system depressant; acute toxicity can cause intoxication, respiratory depression, and coma. Chronic exposure is associated with liver damage. For lab work, follow your institution’s safety data sheet (SDS) and your supervisor’s instructions.

When preparing ethanol solutions, always add ethanol to water (not the reverse) if mixing large volumes, because the mixing is exothermic and can cause splattering. Use a graduated cylinder for the final volume, not for the solvent volume.

Frequently Asked Questions

Is ethanol the same as alcohol?

In everyday language, “alcohol” usually means ethanol, the intoxicating ingredient in drinks. In chemistry, “alcohol” is a broad class of compounds with a hydroxyl group (–OH) attached to a carbon; methanol, propanol, and isopropanol are also alcohols. Ethanol is just one specific alcohol.

What is the difference between ethanol and methanol?

Methanol (CH3OH) has one carbon; ethanol has two. Methanol is highly toxic—even small amounts can cause blindness or death—while ethanol is less acutely toxic but still dangerous in excess. Both are flammable solvents, but methanol is more volatile and has a slightly lower boiling point (64.7 °C vs 78.4 °C).

Why is 70% ethanol a better disinfectant than 100%?

70% ethanol (by volume) in water is more effective than absolute ethanol because water helps ethanol denature proteins more rapidly and allows it to penetrate cell membranes. Pure ethanol evaporates too quickly and coagulates surface proteins, which can protect microbes underneath. The water in 70% solutions slows evaporation, increasing contact time.

Can ethanol be used as a fuel in a regular car?

Most gasoline cars can run on blends up to E10 (10% ethanol, 90% gasoline) without modification. Higher blends like E85 require a flex-fuel vehicle because ethanol has different combustion properties and is corrosive to some engine materials. Pure ethanol has a lower energy density than gasoline, so fuel economy drops.

How do you make anhydrous (100%) ethanol?

Simple distillation of a water–ethanol mixture gives the azeotrope at 95.6% ethanol by mass (about 96% by volume), not 100%. To remove the remaining water, chemists use a desiccant like molecular sieves, or add a third component like benzene to break the azeotrope (though benzene is toxic and rarely used now). Industrial “absolute” ethanol is made by azeotropic distillation or membrane dehydration.

What is denatured ethanol?

Denatured ethanol is ethanol that has additives (denaturants) to make it undrinkable, avoiding alcohol taxes. Common denaturants include methanol, isopropanol, methyl ethyl ketone, or bittering agents. It is used as a solvent or fuel, but it is not safe for consumption and may be toxic due to the additives.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 46.07 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →