Acetone (C₃H₆O) has a molar mass of 58.08 g/mol and a density of about 0.785 g/mL at 20 °C. Use the calculator below to convert a measured acetone mass and volume into moles, or calculate the mass or volume from a chosen amount; enter the two known quantities and read the requested result.
Formula
The calculator uses the formula for amount of substance, n = m / M, and the definition of density, ρ = m / V. Here, n is acetone amount in moles, m is mass in grams, and M is molar mass in grams per mole. For acetone, the calculator uses M = 58.08 g/mol. The density estimate uses ρ = 0.785 g/mL at 20 °C; rearranging gives V = m / ρ and m = ρV. In those equations, V is volume in millilitres and ρ is density in grams per millilitre.
The first output is the amount in moles calculated from the entered mass. The second is a density calculated from both entered values. The last two outputs are estimates based on the conventional 20 °C density: volume from mass, and mass from volume. The calculator’s input fields accept zero or positive values; a zero volume cannot be used to calculate density, so enter a positive volume when that output is needed.
Worked Example
With the defaults, the input mass is 58.08 g and the volume is 73.99 mL. The molar-mass calculation is:
n = 58.08 g ÷ 58.08 g/mol = 1.0000 mol
The density calculated from the entered mass and volume is:
ρ = 58.08 g ÷ 73.99 mL ≈ 0.78497 g/mL
Using the stated reference density for the mass-to-volume estimate gives:
V = 58.08 g ÷ 0.785 g/mL ≈ 73.99 mL
And the volume-to-mass estimate is:
m = 73.99 mL × 0.785 g/mL ≈ 58.08 g
Outputs are rounded to the number of decimal places specified in the calculator block. The density inferred from the defaults is not exactly 0.785 because the displayed volume and reference density are rounded.
Assumptions
- The compound is pure acetone, with formula C₃H₆O and molar mass 58.08 g/mol.
- The density estimate of 0.785 g/mL is a reference value near 20 °C, not a universal value at every temperature.
- The entered mass and volume use grams and millilitres. No temperature correction, impurities, or measurement uncertainty is included.
- This is a calculation aid for study and lab planning, not a substitute for a measured density or a laboratory method. Follow your lab method, the safety data sheet (SDS) and your supervisor.
Why the Values Matter
Molar mass connects a balance reading to the molecular amount used in chemical equations. One mole of acetone has a mass of approximately 58.08 g. Thus, a 10.00 g sample corresponds to about 10.00 ÷ 58.08 = 0.1722 mol. That conversion is useful in stoichiometry, where reaction coefficients compare amounts in moles rather than grams.
The formula explains the molar mass: acetone contains three carbon atoms, six hydrogen atoms, and one oxygen atom. Using abridged standard atomic weights—C = 12.011, H = 1.008, and O = 15.999 g/mol—the sum is 3(12.011) + 6(1.008) + 15.999 = 58.080 g/mol. Small differences in published last digits can come from rounding or the atomic-weight convention used.
Density links mass to volume. At the reference value, 100 mL of acetone has an estimated mass of 78.5 g, while 100 g occupies about 127 mL. This makes density useful when a quantity is measured volumetrically but a calculation requires mass, or vice versa. It does not mean that millilitres and grams are interchangeable: the conversion depends on the substance and conditions.
Temperature, Purity, and Measurement
Liquid density generally changes with temperature because a liquid expands or contracts. The 0.785 g/mL value is commonly cited near 20 °C; a value measured at another temperature may differ. For work requiring high accuracy, use a density value specified at the actual temperature and for the relevant acetone grade, or measure the sample using an appropriate validated method.
Impurities can also change the measured density. Water contamination, for example, means a sample is no longer pure acetone, so calculations based on pure acetone’s molar mass and density may not describe it precisely. Ordinary measuring uncertainty matters too: a small error in a narrow volume reading can noticeably affect a calculated density, especially for small samples.
- Record the temperature alongside a density value.
- Keep units consistent: use grams with g/mol and millilitres with g/mL.
- Retain extra digits during intermediate calculations, then round the final result to match the measurement quality.
- Do not infer purity from density alone; different mixtures can produce similar readings.
Common Conversion Mistakes and Safety
A frequent error is treating the numerical value of density as the same in every unit. The reference value 0.785 g/mL equals 785 g/L, not 0.785 g/L. Another is multiplying when the equation calls for division: to find volume from mass, divide mass by density; to find mass from volume, multiply volume by density.
Acetone is a highly flammable, volatile solvent. Keep it away from heat, sparks, and flames, and avoid breathing vapour or getting liquid on skin or in eyes. Work with suitable ventilation and protective measures specified by the SDS and local rules. Store it in a compatible, properly closed container away from ignition sources. The calculator performs arithmetic only and does not determine whether a handling method or experimental use is safe.
Frequently Asked Questions
What is the molar mass of acetone?
Acetone, C₃H₆O, has a molar mass of approximately 58.08 g/mol, calculated from its carbon, hydrogen, and oxygen atoms.
What is acetone’s density in g/mL?
A commonly cited density is about 0.785 g/mL at 20 °C. The value varies with temperature and sample composition.
How many moles are in 10 g of acetone?
Divide the mass by the molar mass: 10 g ÷ 58.08 g/mol ≈ 0.1722 mol.
How much does 100 mL of acetone weigh?
At 0.785 g/mL, 100 mL has an estimated mass of 78.5 g. This is an estimate for the reference temperature and pure acetone.
Are acetone’s molar mass and molecular weight the same?
In everyday chemistry usage, “molecular weight” often refers to the same numerical value, about 58.08, while molar mass states the units explicitly as g/mol.
Does acetone’s density change with temperature?
Yes. A liquid’s density depends on temperature, so use a value measured or tabulated for the temperature relevant to the calculation when precision matters.
Related
Formula used
in m | Acetone mass | g | 58.08 | 0 in v | Acetone volume | mL | 73.99 | 0 out n | Amount of acetone | mol | m / 58.08 | 4 out rho | Density from mass and volume | g/mL | m / v | 3 out vol | Volume at 20 °C from mass | mL | m / 0.785 | 2 out mass | Mass at 20 °C from volume | g | v * 0.785 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Isotope Percent Abundance Calculator and How to Use It75.91 %
- Percentage Abundance Calculator and How to Find It
- Isotope Fractional Abundance Calculator and Formula0.2409 fraction
- Percent Abundance Formula: Calculate Isotope Percentages25.00 %
- Isotope Percent Abundance Calculator and How to Use It50.00 %
- Isotope Percent Abundance Calculator and How-To Guide75.91 %