A base × width × height calculator multiplies three measurements to find a rectangular prism’s volume: V = base × width × height. Enter all three dimensions in the same length unit to get a volume in that unit cubed, plus the equivalent volume in cubic metres.
Formula
For a rectangular prism, multiply the lengths of its three mutually perpendicular edges:
V = b × w × h
- V is volume in cubic metres (m³).
- b is base length in metres (m).
- w is width in metres (m).
- h is vertical height in metres (m).
The calculator also converts cubic metres to litres using 1 m³ = 1,000 L, so its second result is V × 1,000. This conversion applies to volume; it does not change the dimensions themselves. If you enter lengths in centimetres or another unit, convert each one to metres first: 1 cm = 0.01 m, 1 mm = 0.001 m, and 1 ft = 0.3048 m.
Worked Example
Using the calculator’s default inputs—base 2 m, width 1.5 m, and height 0.8 m:
- Multiply the base by the width: 2 m × 1.5 m = 3 m².
- Multiply that area by the height: 3 m² × 0.8 m = 2.4 m³.
- Convert to litres: 2.4 m³ × 1,000 L/m³ = 2,400 L.
Result: 2.4000 m³, or 2,400.00 L. The first result is the volume in cubic metres; the litre result is a convenient equivalent, not a separate estimate.
Assumptions
- The object is a rectangular prism, also called a cuboid or rectangular box.
- The three inputs describe perpendicular edge lengths, not diagonal measurements.
- All dimensions use the same unit. The calculator’s specified input unit is metres.
- The result is geometric capacity or space occupied; it does not account for wall thickness, rounded corners, contents, or usable fill level.
What Base, Width, and Height Mean
In this formula, “base” means one side length of the rectangular bottom face, not the area of that face. Width is the other horizontal side of the base, and height is the perpendicular distance from the base to the top. The choice of which horizontal side is called base or width does not affect the product: swapping them leaves the volume unchanged.
A useful way to understand the calculation is in two stages. First, base × width gives the area of a rectangular face. Then multiplying that area by height gives the amount of three-dimensional space. The units follow the same multiplication: m × m = m², then m² × m = m³. A result in square metres would be an area, not a volume.
“Base × width × height” is not a universal volume formula for every shape. It directly applies when the dimensions describe a box-shaped solid with straight sides and right-angle corners. For a triangular prism, for example, the triangular base area must be calculated first and then multiplied by the prism’s length. A cylinder needs its own formula, πr²h. Using the box formula for either shape generally overestimates or otherwise misstates its volume.
When to Use This Calculation
Use the calculator when you know the inside or outside dimensions of a rectangular space and need its volume. Common examples include estimating the capacity of a rectangular tank, measuring a storage box, calculating the space inside a room, or finding the volume of a rectangular block. Whether to use internal or external dimensions depends on the question: internal measurements estimate usable capacity, while external measurements describe the object’s overall bounding volume.
- Room: multiply interior floor length, floor width, and ceiling height to estimate room volume.
- Box: use internal length, width, and depth for approximate capacity; use outer edges for the package’s external volume.
- Construction material: multiply the dimensions of a rectangular solid to estimate its geometric volume, then account separately for waste, gaps, or irregularities.
For a liquid, 1 litre occupies 1,000 cm³, and 1 m³ is 1,000 litres. These conversions are exact unit relationships. But a calculated tank volume does not necessarily equal its practical fill capacity: fittings, rounded corners, a curved bottom, or a required unfilled space can reduce the amount it safely or usefully holds.
Units, Accuracy, and Common Mistakes
The most frequent error is mixing units. Multiplying 200 cm × 1.5 m × 80 cm without conversion produces a meaningless numerical result because the measurements are not expressed on one consistent scale. Convert first—for example, 200 cm = 2 m and 80 cm = 0.8 m—then calculate 2 × 1.5 × 0.8 = 2.4 m³.
Remember that cubic units scale sharply. A cube measuring 1 m on each side has a volume of 1 m³, or 1,000 L. A 1 cm cube is only 1 cm³, which equals 1 mL. Do not convert cubic metres to litres by multiplying a length by 1,000; convert the final volume, or use the calculator’s litre output.
Keep enough precision during intermediate steps and round the final answer to match the quality of the measurements. If a dimension is known only to the nearest centimetre, reporting many decimal places does not make the physical estimate more precise. For example, measured dimensions may vary slightly because of tape placement, uneven surfaces, or manufacturing tolerances.
Another common misunderstanding is confusing volume with weight or mass. This calculator reports space, not how heavy an object or its contents are. To estimate the mass of a uniform material, multiply volume by an appropriate density, with compatible units; the density depends on the material and conditions and is not included here.
Irregular Shapes and Practical Limits
The formula assumes a box-shaped object. If a container has sloping sides, rounded corners, a curved base, or internal partitions, multiplying its maximum length, width, and height gives the volume of its bounding box—not necessarily its actual capacity. For a tank with a changing cross-section, use a shape-specific formula or divide it into simpler sections and add their volumes.
Measurements also need to match the quantity you want. To estimate how much a box can hold, measure its interior dimensions and allow for any unusable space. To estimate shipping space, the relevant dimensions are usually the exterior measurements. For a room, the basic product gives a geometric volume but does not describe airflow, temperature, or the amount of furniture inside it.
Finally, the calculation cannot tell whether an object or structure can safely contain a particular load or liquid. Volume is not a structural rating. Material strength, wall thickness, support, pressure, and applicable design requirements are separate considerations.
Frequently Asked Questions
How do you calculate base times width times height?
Multiply the three perpendicular side lengths: V = b × w × h. Use consistent length units; the answer is in those units cubed.
Is base × width × height the same as length × width × height?
For a rectangular prism, yes. “Base” is one horizontal side of the rectangular face, and the labels can be swapped without changing the product.
How many litres are in a cubic metre?
One cubic metre equals exactly 1,000 litres. Multiply a volume in m³ by 1,000 to express it in litres.
Can I use centimetres in this calculator?
The calculator inputs are in metres. Convert centimetres to metres by dividing by 100, or calculate using all dimensions in centimetres and report the answer in cm³ before converting.
Does this formula work for every box or tank?
It works directly for a rectangular prism. A tank with sloped, curved, or rounded sides needs a suitable shape-specific calculation; the three maximum dimensions alone only give its bounding-box volume.
Related
Formula used
in b | Base length | m | 2 | 0 in w | Width | m | 1.5 | 0 in h | Height | m | 0.8 | 0 out v | Volume | m^3 | b * w * h | 4 out l | Volume | L | b * w * h * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Serial Dilution Calculation Examples0.2000 mol/L
- Serial Dilution: How It Works & Why It Matters1.000 × 10−5 mol/L
- Serial Dilution A Level Biology: How To Do It30
- Serial vs Simple Dilution: Key Differences0.2000 mol/L
- Milton Tablet Dilution: Mixing Guide0.2000 mol/L
- qPCR Serial Dilution Standard Curve: How to Build One100,000 copies/µL