Calcium nitrate melts at 561 °C (1,042 °F) in its anhydrous form. This article explains that value, why it varies with hydration, and how it affects practical use in fertilizers, concrete, and labs.
Formula
The molarity of a calcium nitrate solution is:
C = m / (M × V)
- C – molarity (mol/L)
- m – mass of calcium nitrate (g)
- M – molar mass (g/mol), 164.09 for anhydrous Ca(NO₃)₂
- V – final solution volume (L), so mL must be divided by 1000
Worked Example
Using the default values: dissolve 2.922 g of anhydrous Ca(NO₃)₂ in enough water to make 250 mL.
- Convert volume: 250 mL = 0.250 L
- Moles = 2.922 g / 164.09 g/mol = 0.01781 mol
- Molarity = 0.01781 mol / 0.250 L = 0.07124 mol/L ≈ 0.0712 M
The calculator shows 0.0712 M (71.2 mM).
Assumptions
- Anhydrous Ca(NO₃)₂ (molar mass 164.09 g/mol).
- Final volume is used, not solvent volume.
- Complete dissolution at room temperature.
Background: What Is Calcium Nitrate?
Calcium nitrate is an inorganic salt with the formula Ca(NO₃)₂. It is highly soluble in water and is commonly supplied as the tetrahydrate, Ca(NO₃)₂·4H₂O, which contains four water molecules per formula unit. The anhydrous form is less common in commerce because it is hygroscopic. The melting point of the tetrahydrate is about 42.7 °C (108.9 °F), far lower than the anhydrous salt, because the water molecules disrupt the crystal lattice. This is a key point: when someone asks “calcium nitrate melting point,” the answer depends on which form they mean.
Why the Melting Point Matters
The melting point is a physical constant used to identify a substance and assess its purity. For calcium nitrate, it also has practical implications:
- Handling – The tetrahydrate can melt in a warm room, making it difficult to weigh or store.
- Thermal stability – Anhydrous calcium nitrate decomposes before boiling, releasing nitrogen oxides; it does not have a boiling point.
- Industrial use – In concrete admixtures, the salt is used as a set accelerator; melting point is not directly relevant, but thermal behavior during curing can be.
- Fertilizer – It is a common source of calcium and nitrogen; melting point is rarely relevant in soil applications.
How to Measure or Verify the Melting Point
In a laboratory, melting point is measured with a capillary tube apparatus. A small amount of the dried sample is placed in a thin glass tube and heated slowly; the temperature at which the solid first turns liquid is recorded. For anhydrous calcium nitrate, this should be near 561 °C, but the sample must be kept dry because even traces of moisture will lower the observed value. In practice, many labs use differential scanning calorimetry (DSC) to get a precise value, especially for materials that decompose near their melting point.
Common Problems and Misconceptions
A common misconception is that calcium nitrate melts at 42 °C because that is the value listed for the tetrahydrate. Always check the hydration state. Another issue is confusing melting point with decomposition temperature – anhydrous calcium nitrate decomposes around 500–600 °C, so the melting point is often observed simultaneously with decomposition, making it hard to measure accurately. In humid air, the anhydrous salt absorbs water and may form the tetrahydrate, so a sample left open can melt at a much lower temperature than expected.
Comparison with Related Nitrates
Other nitrate salts have different melting points:
- Sodium nitrate (NaNO₃): 308 °C
- Potassium nitrate (KNO₃): 334 °C
- Ammonium nitrate (NH₄NO₃): 169.6 °C
- Magnesium nitrate (Mg(NO₃)₂): 129 °C (anhydrous)
Calcium nitrate’s higher melting point reflects its stronger ionic lattice. The hydrated forms of these salts generally melt much lower – for example, magnesium nitrate hexahydrate melts at 89 °C.
Safety and Handling
Calcium nitrate is an oxidizer. It can intensify combustion of other materials, so store it away from reducing agents, organic materials, and flammable substances. When heated strongly, it decomposes to produce toxic nitrogen dioxide fumes. Always follow your lab method, the safety data sheet (SDS), and your supervisor. For fertilizer or concrete use, wear appropriate gloves and eye protection to avoid irritation.
Practical Applications and Selection
Choose the form based on your need:
- Anhydrous – for precise laboratory work where water content must be controlled; store in a desiccator.
- Tetrahydrate – for general use, including fertilizer and concrete admixtures; cheaper and easier to handle in cool conditions.
If you are preparing a solution, the molar mass differs: the tetrahydrate has a molar mass of 236.15 g/mol, so you must adjust your calculations. The calculator above uses the anhydrous value; if you use the tetrahydrate, change the molar mass input accordingly.
Frequently Asked Questions
What is the melting point of calcium nitrate tetrahydrate?
The tetrahydrate melts at about 42.7 °C (108.9 °F). This is the form commonly sold as fertilizer. It can melt on a hot day, so store it in a cool place.
Does calcium nitrate boil?
No. It decomposes before boiling. When heated above its melting point, it breaks down into calcium oxide, nitrogen dioxide, and oxygen. The decomposition starts around 500–600 °C.
Why does my calcium nitrate melt at room temperature?
If it melts at room temperature, it is likely the tetrahydrate (melting point ~42.7 °C) or it has absorbed moisture from the air. Anhydrous calcium nitrate is very hygroscopic and can form a liquid layer on the surface if exposed to humid air.
Is calcium nitrate soluble in water?
Yes, it is highly soluble. At 20 °C, about 1,210 g of the tetrahydrate dissolves in 1 L of water. The anhydrous form is even more soluble. This makes it useful for making concentrated nutrient solutions.
Can I use the melting point to check purity?
Yes, but with caution. A sharp melting point near 561 °C indicates a fairly pure anhydrous sample. Impurities lower the melting point and broaden the range. However, because decomposition can occur, the observed melting point may be influenced by heating rate.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 164.09 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calcium Nitrate Boiling Point
- Cation Formula for Magnesium Nitrate0.0788 mol/L
- Potassium Nitrate Solubility in Water: Full Data25.9 g/100 mL
- Greenhouse Grade Potassium Nitrate: Uses & Rates0.2000 mol/L
- Molar Mass of KNO2: Formula & Calculation0.1373 mol/L
- Potassium Nitride Formula & How to Write It