molecalculator

Moles & Molar Mass

Calcium Phosphate Molar Mass: How to Calculate

Calculator No. 01-12389 · Updated · Formula and assumptions shown below

Molarity 0.0377 mol/L
Concentration in millimolar
37.68 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
310.18 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar mass of calcium phosphate (Ca3(PO4)2) is 310.18 g/mol. This value is obtained by summing the atomic weights of three calcium atoms, two phosphorus atoms, and eight oxygen atoms. Below is a calculator that lets you verify this value or compute the molar mass of any compound by entering its formula.

Formula

The molar mass (M) of a compound is the sum of the atomic masses of each element multiplied by the number of atoms of that element in the formula. For calcium phosphate, Ca3(PO4)2:

M = (3 × ACa) + (2 × AP) + (8 × AO)

Where:

  • ACa = 40.078 g/mol (atomic weight of calcium)
  • AP = 30.974 g/mol (atomic weight of phosphorus)
  • AO = 15.999 g/mol (atomic weight of oxygen)

Plugging in the values: (3 × 40.078) + (2 × 30.974) + (8 × 15.999) = 120.234 + 61.948 + 127.992 = 310.174 g/mol, typically rounded to 310.18 g/mol.

Worked Example

Using the calculator’s default inputs: you have 2.922 g of calcium phosphate (molar mass 310.18 g/mol) and you dissolve it in water to make 250 mL of solution. What is the molarity?

  1. Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
  2. Calculate moles of solute: 2.922 g ÷ 310.18 g/mol = 0.009421 mol
  3. Calculate molarity: 0.009421 mol ÷ 0.250 L = 0.03768 mol/L

The calculator gives 0.0377 mol/L (rounded to 4 decimal places) and 37.68 mM. Always check that your units cancel: grams divided by g/mol gives moles, then moles divided by liters gives mol/L.

Assumptions

  • The atomic weights used are the IUPAC standard atomic weights (abridged).
  • The compound is pure and anhydrous (no water of hydration).
  • The solution is assumed to be at room temperature, and the volume is the final total volume after dissolution, not the solvent volume.
  • For molarity calculations, the solute dissolves completely and the solution is homogeneous.

Why Molar Mass Matters

Molar mass is the bridge between the mass of a substance and the number of moles, which is central to stoichiometry, preparing solutions, and understanding reactions. For calcium phosphate, knowing its molar mass lets you:

  • Convert between grams and moles when balancing equations or calculating yields.
  • Prepare solutions of a specific molarity, as shown in the calculator.
  • Determine the mass of calcium or phosphate in a given sample, useful in agriculture (fertilizers) and biology (bone and teeth composition).

Common Mistakes and Misconceptions

A frequent error is forgetting the subscript outside the phosphate group. Ca3(PO4)2 contains two phosphate ions, so you must multiply the phosphorus and oxygen atomic weights by 2, not by 1. Another mistake is using the atomic weight of phosphorus as 31.0 instead of 30.974, which changes the final value slightly. Also, be careful not to confuse calcium phosphate (Ca3(PO4)2) with calcium hydrogen phosphate (CaHPO4) or calcium dihydrogen phosphate (Ca(H2PO4)2)—each has a different molar mass.

How to Use the Calculator for Other Compounds

The calculator above is set up for molarity, but you can adapt the same logic to find molar mass if you know the mass and moles. Alternatively, to compute molar mass from a formula, you can use the formula section manually. For any compound, follow these steps:

  1. Write the correct chemical formula (including parentheses and subscripts).
  2. Count the number of atoms of each element.
  3. Multiply each element’s atomic weight by its count.
  4. Sum all the products.

For example, for calcium phosphate: 3 Ca, 2 P, 8 O. Always double-check the formula—especially for ionic compounds with polyatomic ions.

Frequently Asked Questions

What is the molar mass of calcium phosphate in g/mol?

It is 310.18 g/mol for the anhydrous form, Ca3(PO4)2. If you have a hydrated form, such as Ca3(PO4)2·H2O, you would add the molar mass of water (18.015 g/mol) to get 328.20 g/mol, but the common “calcium phosphate” in labs is usually anhydrous.

How many atoms are in one formula unit of calcium phosphate?

One formula unit contains 13 atoms: 3 calcium, 2 phosphorus, and 8 oxygen. This is derived from the subscripts in the formula.

Why is calcium phosphate insoluble in water?

Calcium phosphate has a very low solubility product (Ksp ≈ 2.07 × 10−33 at 25°C), meaning the ionic lattice is highly stable in water. This is why it forms bones and teeth, and why it is used as a fertilizer—it releases phosphate slowly.

Is calcium phosphate the same as tricalcium phosphate?

Yes, “calcium phosphate” often refers to tricalcium phosphate, Ca3(PO4)2. However, there are other calcium phosphates, such as dicalcium phosphate (CaHPO4) and monocalcium phosphate (Ca(H2PO4)2), each with different molar masses (136.06 g/mol and 234.05 g/mol, respectively).

How do I prepare a 0.1 M calcium phosphate solution if it’s insoluble?

You generally cannot prepare a true 0.1 M solution by dissolving calcium phosphate in water because it is practically insoluble. Instead, you might use a soluble calcium salt (like calcium chloride) and a soluble phosphate salt (like sodium phosphate) in a buffer, but the calcium phosphate will precipitate. For laboratory work, follow your method and SDS, and consider using a chelating agent if a clear solution is required.

Safety and Lab Practice

Calcium phosphate is generally non-hazardous, but as with any chemical, avoid inhaling dust and wash hands after handling. When preparing solutions, always add solute to solvent slowly and use appropriate personal protective equipment. Follow your lab method, the safety data sheet (SDS), and your supervisor’s instructions. For molarity calculations, always use the final volume of the solution, not the volume of solvent added.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 310.18 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →