An ionic compound is electrically neutral overall: the total positive charge from its cations equals the total negative charge from its anions. This calculator determines the net charge from the number and charge of each ion you enter, so you can check whether a formula represents a neutral compound or an ion with a net charge.
Formula
The net charge is the sum of the signed charges of all ions:
Q = n+z+ − n−|z−|
- Q is the net charge, in elementary-charge units.
- n+ is the number of positive ions, and z+ is the positive charge on each, in elementary-charge units.
- n− is the number of negative ions, and |z−| is the magnitude of each negative charge, in elementary-charge units.
The inputs for negative ions use a positive magnitude; the subtraction in the formula supplies the negative sign. To convert the result to coulombs, multiply by the elementary charge, exactly 1.602176634 × 10−19 C per elementary charge.
Worked Example
Using the calculator’s default values, there is one singly charged positive ion and one singly charged negative ion:
Q = (1 ion × 1) − (1 ion × 1) = 0 elementary charges.
In coulombs, Q = 0 × 1.602176634 × 10−19 C = 0 C. The example is electrically neutral.
Assumptions
- Each ion has the charge entered, and the counts refer to the ions represented in the formula unit or group being checked.
- Charges are expressed as whole-number multiples of the elementary charge, as is usual for ordinary monatomic and polyatomic ions.
- The calculation checks charge balance only; it does not determine whether a proposed substance is stable or whether a particular formula is chemically plausible.
Why Ionic Compounds Have a Charge Balance
Ionic bonding involves electrostatic attraction between oppositely charged ions. An ionic solid normally contains enough positive and negative charge to make each formula unit neutral. This is why the formula for an ordinary ionic compound does not usually display an overall charge, even though its component ions are charged.
For example, sodium ions have charge +1 and chloride ions have charge −1. One of each gives a total of zero, so sodium chloride is written NaCl. Magnesium ions have charge +2, while chloride ions have charge −1. Two chloride ions are needed for each magnesium ion: +2 + 2(−1) = 0, giving MgCl2.
Neutrality is a constraint on the formula, not a claim that the ions stop being charged. In a solid, the ions remain arranged in a structure held together by their attractions. When an ionic substance dissolves in water, it may separate into mobile ions, but the solution as a whole remains electrically neutral: the charges of all its ions balance.
How to Use the Calculator
Enter the charge magnitude of each kind of ion and how many of each ion are present in the formula unit or group you want to check. For instance, for MgCl2, enter positive charge 2 and count 1, then negative charge magnitude 1 and count 2. The result is zero. For a polyatomic ion, use its total charge as one ion’s charge; for sulfate, SO42−, enter a negative-ion magnitude of 2.
The calculator allows zero counts and zero charge magnitudes for arithmetic flexibility. A zero result means the entered charges balance. A positive result means the group has net positive charge; a negative result means it has net negative charge. The coulomb output is usually tiny because one elementary charge is only 1.602176634 × 10−19 C.
For formulas with more than one type of cation or anion, total each side before entering values. For example, a group containing two +1 ions and one −2 ion balances: (2 × 1) − (1 × 2) = 0. If there are several distinct ion types, add their signed contributions yourself, or check each side’s total charge separately and compare them.
Examples and Common Misconceptions
- Calcium fluoride, CaF2: one Ca2+ contributes +2 and two F− ions contribute −2. The formula unit is neutral.
- Aluminum oxide, Al2O3: two Al3+ ions contribute +6; three O2− ions contribute −6. The total is zero.
- Ammonium, NH4+: this is a polyatomic ion with net charge +1, not a neutral ionic compound by itself. In ammonium chloride, one NH4+ balances one Cl−.
A frequent mistake is to confuse the charge on an ion with the number of atoms in its formula. The subscript in MgCl2 means two chloride ions per formula unit; it does not change each chloride ion’s −1 charge. Another common error is to omit a polyatomic ion’s parentheses and subscripts when counting ions. In Ca(NO3)2, there are two nitrate ions, each with charge −1, not one nitrate ion with charge −2.
Roman numerals in names such as iron(III) chloride specify the iron ion’s charge (+3); they are not counts. Three chloride ions, each −1, balance one Fe3+, so the formula is FeCl3.
What a Nonzero Result Means
If a proposed ionic compound formula gives a nonzero result, first check that the ion charges and counts were entered correctly. A neutral formula unit should balance, so a nonzero total often signals a missing subscript, an incorrect oxidation state, or a mistaken ion charge. For example, entering one Mg2+ and one Cl− gives +1; the balanced formula needs two chloride ions.
However, not every collection of ions is intended to be a neutral compound. A polyatomic ion such as carbonate, CO32−, has a nonzero net charge, and a complex ion can also carry an overall charge. Such formulas write the net charge outside brackets or parentheses, such as [Fe(CN)6]4−. A nonzero result can therefore be correct when you are checking an ion rather than a neutral formula unit.
In bulk materials and solutions, charge balance applies to the full system, not necessarily to every small sample or individual ion. The calculator treats the entries as a specified group and does not model crystal structures, ion pairing, electron transfer, or solution equilibria.
Frequently Asked Questions
What is the overall charge of an ionic compound?
An ordinary ionic compound has an overall charge of zero. Its cation charges and anion charges balance in the ratio shown by its formula.
Why is NaCl neutral if sodium and chloride ions are charged?
One Na+ has charge +1 and one Cl− has charge −1. Together, their charges sum to zero, although the ions retain their individual charges.
How do I work out an ionic formula from ion charges?
Choose the smallest whole-number ratio of ions that makes the positive and negative totals equal. For Al3+ and O2−, two aluminum ions give +6 and three oxide ions give −6, producing Al2O3.
Can an ionic compound have a nonzero charge?
A formula unit of an ordinary ionic compound is neutral, but a polyatomic or complex ion can have a net charge. Its formula is written with that charge, such as NH4+.
Does a zero charge mean the ions are uncharged?
No. It means their charges cancel when added together. The individual ions can still carry positive or negative charges.
Related
Formula used
in pc | Positive ion charge | elementary charges | 1 | 0 in pn | Number of positive ions | ions | 1 | 0 in nc | Magnitude of negative ion charge | elementary charges | 1 | 0 in nn | Number of negative ions | ions | 1 | 0 out q | Net ionic charge | elementary charges | pn * pc - nn * nc | 0 out qp | Net charge in coulombs | C | q * 1.602176634e-19 | 6
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s