molecalculator

Moles & Molar Mass

Chemical Symbol for Potassium Nitrate (KNO3)

Calculator No. 01-12536 · Updated · Formula and assumptions shown below

Molarity of KNO3 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity of KNO3 × 1000
Mass of KNO3
10.11 g
Set in the form below
Molar mass of KNO3
101.1 g/mol
Set in the form below
You enter
Mass of KNO3 (g), Molar mass of KNO3 (g/mol), Volume of water (mL)
You get
Molarity of KNO3 (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The chemical symbol for potassium nitrate is KNO3. This formula represents one potassium (K) atom, one nitrogen (N) atom, and three oxygen (O) atoms, and it is the standard notation used in chemistry for this compound.

Formula

The molarity (concentration) of a potassium nitrate solution is calculated as:

c = m / (M × V)

Where:

  • c = molarity of the solution (mol/L)
  • m = mass of KNO3 (g)
  • M = molar mass of KNO3 (g/mol), 101.10 g/mol
  • V = final volume of solution (L), converted from mL by dividing by 1000

Worked Example

Using the default values from the calculator: mass = 10.11 g, molar mass = 101.10 g/mol, volume = 500 mL.

  1. Convert volume to liters: 500 mL ÷ 1000 = 0.500 L
  2. Calculate moles of KNO3: 10.11 g ÷ 101.10 g/mol = 0.1000 mol
  3. Calculate molarity: 0.1000 mol ÷ 0.500 L = 0.2000 mol/L

So the molarity is 0.2000 M, which is 200.0 mM. The calculator gives the same result.

Assumptions

  • The solution is at 25 °C and dilute, so volume changes on dissolving are ignored.
  • KNO3 is a pure solid reagent with no water of hydration.
  • The final volume is the sum of solute and solvent (approximate for dilute solutions).

Background and Properties

Potassium nitrate is an ionic compound composed of K+ and NO3− ions. It is a white crystalline solid at room temperature, highly soluble in water (about 38 g per 100 mL at 25 °C). Its molar mass is 101.10 g/mol, calculated from atomic weights: K (39.10), N (14.01), and three O (16.00 each).

Historically, potassium nitrate was a key ingredient in gunpowder (along with charcoal and sulfur). Today it is used in fertilizers (as a source of potassium and nitrogen), food preservation (E252), and in some toothpastes for sensitive teeth. In the lab, it is a common oxidizer and a source of nitrate ions.

How to Use the Calculator

This calculator helps you prepare a solution of a given molarity. Enter the mass of KNO3 you have, the molar mass (default 101.10 g/mol), and the volume of water you plan to use. The calculator outputs the molarity and millimolar concentration.

For example, to make 250 mL of a 0.1 M solution, you would need 0.025 mol of KNO3, which is 2.5275 g. The calculator can also work backwards: if you know the desired molarity and volume, you can adjust the mass input until the output matches.

Common Mistakes and Misconceptions

  • Confusing KNO3 with other nitrates: Sodium nitrate (NaNO3) and ammonium nitrate (NH4NO3) are different compounds with different properties.
  • Using the wrong molar mass: Some sources list 101.1, others 101.10; always use the precise value for calculations.
  • Forgetting to convert mL to L: Molarity is mol/L, so volume must be in liters.
  • Assuming complete dissociation: In water, KNO3 dissociates into K+ and NO3−, but for concentration calculations, the formula unit is what matters.

Safety and Handling

Potassium nitrate is an oxidizer, meaning it can accelerate the combustion of other materials. Keep it away from flammable substances and reducing agents. It is not highly toxic but can cause irritation to eyes and skin. Always wear gloves and safety goggles when handling. In case of contact, rinse with plenty of water. Follow your lab method, the safety data sheet (SDS) and your supervisor for specific procedures.

Frequently Asked Questions

Is KNO3 the same as saltpeter? Yes, potassium nitrate is also known as saltpeter (or saltpetre). Historically, saltpeter referred to potassium nitrate, though the term was sometimes used for sodium nitrate as well.

What is the difference between KNO3 and KNO2? KNO3 is potassium nitrate (nitrate ion, NO3−), while KNO2 is potassium nitrite (nitrite ion, NO2−). They have different properties; nitrite is used in curing meats and is more toxic.

Why is potassium nitrate used in fertilizers? It provides two essential plant nutrients: potassium (K) and nitrogen (N). It is highly soluble and quickly available to plants, making it a common ingredient in liquid fertilizers and hydroponics.

Can I use this calculator for other salts? Yes, you can change the molar mass to that of any other salt and the calculator will work the same way. Just ensure the formula unit is correct.

What is the oxidation state of nitrogen in KNO3? In the nitrate ion, nitrogen has an oxidation state of +5. This is the highest oxidation state for nitrogen, which is why nitrate acts as an oxidizing agent.

Related

Formula used
in m | Mass of KNO3 | g | 10.11 | 0
in mm | Molar mass of KNO3 | g/mol | 101.10 | 0.001
in v | Volume of water | mL | 500 | 0.001
out c | Molarity of KNO3 | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →