molecalculator

Moles & Molar Mass

Copper Sulfate Formula Mass & Molar Mass

Calculator No. 01-7385 · Updated · Formula and assumptions shown below

Molarity 0.0468 mol/L
Concentration in millimolar
46.81 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
249.69 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Copper sulfate formula mass (more precisely, its molar mass) is 159.61 g/mol for anhydrous CuSO4 and 249.69 g/mol for the common pentahydrate form CuSO4·5H2O. These values come from summing the standard atomic weights of copper, sulfur, oxygen, and (for the hydrate) five water molecules. This article explains how to calculate those numbers, why there are two different masses, and how to use them in real lab calculations.

Formula

The molar mass (M) is the mass of one mole of a substance, expressed in grams per mole (g/mol). For a compound, it is the sum of the atomic weights of all atoms in its chemical formula. For copper sulfate pentahydrate, CuSO4·5H2O:

M(CuSO4·5H2O) = M(Cu) + M(S) + 4×M(O) + 5×[2×M(H) + M(O)]

Using IUPAC standard atomic weights (Cu = 63.546, S = 32.06, O = 15.999, H = 1.008):

  • Cu: 63.546 g/mol
  • S: 32.06 g/mol
  • O (in sulfate): 4 × 15.999 = 63.996 g/mol
  • Water (5 H2O): 5 × (2×1.008 + 15.999) = 5 × 18.015 = 90.075 g/mol

Total = 63.546 + 32.06 + 63.996 + 90.075 = 249.677 g/mol (often rounded to 249.68 or 249.69). For anhydrous CuSO4, simply omit the water part: 63.546 + 32.06 + 63.996 = 159.602 g/mol (rounded to 159.61).

In the calculator above, you enter the mass of copper sulfate you weighed out, its molar mass (default is the pentahydrate), and the final volume of solution. The calculator returns the molarity (mol/L) and millimolar concentration (mM).

Worked Example

Using the default values: you dissolve 2.922 g of CuSO4·5H2O (molar mass 249.69 g/mol) in water to make 250 mL of solution.

Step 1: Convert volume to liters: 250 mL = 250 / 1000 = 0.250 L

Step 2: Calculate moles of solute: moles = mass / molar mass = 2.922 g / 249.69 g/mol = 0.011703 mol

Step 3: Calculate molarity: c = moles / volume = 0.011703 mol / 0.250 L = 0.046812 mol/L ≈ 0.0468 M

Step 4: Convert to millimolar: 0.046812 M × 1000 = 46.81 mM

So the solution is approximately 0.0468 M (46.8 mM) in copper sulfate.

Assumptions

  • The solute is pure CuSO4·5H2O with no adsorbed water or impurities.
  • The molar mass uses standard atomic weights; actual reagent purity may vary slightly.
  • Final volume is used, not the volume of solvent added. This is the standard convention for preparing solutions in a volumetric flask.
  • The solution is at room temperature; molarity is temperature-dependent because volume changes with temperature.

Why Are There Two Different Masses?

Copper sulfate commonly appears as the pentahydrate, CuSO4·5H2O, a bright blue crystalline solid. The water molecules are part of the crystal structure, not just surface moisture. When you heat the blue crystals, they lose water and become the white or gray anhydrous form, CuSO4. The anhydrous form is hygroscopic and will reabsorb water from the air, so it is less common in routine lab work. The formula mass you use depends on which form you actually weighed. If you use the pentahydrate but calculate with the anhydrous molar mass, your solution will be about 36% more concentrated than you intended.

How to Use the Molar Mass in Solution Preparation

To prepare a specific molarity of copper sulfate solution, you need to know which form you have. The general equation is:

mass (g) = desired molarity (mol/L) × molar mass (g/mol) × volume (L)

For example, to make 500 mL of 0.100 M CuSO4 using the pentahydrate:

mass = 0.100 mol/L × 249.69 g/mol × 0.500 L = 12.4845 g ≈ 12.48 g

If you mistakenly used the anhydrous mass (159.61), you would add only 7.98 g, giving a solution that is only 0.064 M. Always check the label on the reagent bottle.

Common Mistakes and Misconceptions

  • Forgetting the water of hydration: The most common error is using the anhydrous molar mass for the pentahydrate, leading to a concentration error of about 36%.
  • Confusing mass and moles: Molar mass is g/mol, not g. The number of moles is mass divided by molar mass.
  • Using the wrong atomic weight for copper: Some sources use 63.55, others 63.546. The difference is negligible for most lab work, but for precise work use the IUPAC value.
  • Assuming the hydrate is exactly 5 water molecules: Reagent-grade copper sulfate is typically the pentahydrate, but if it has been partially dehydrated (e.g., left open in dry air), the effective molar mass changes. If you need exact concentrations, standardize the solution or check the water content.

Related Calculations: Percent Composition and Dilutions

The molar mass also lets you calculate the percent composition of copper sulfate. For the pentahydrate, the mass of water is 90.075 g out of 249.677 g, so water is about 36.1% of the mass. The copper is 63.546/249.677 ≈ 25.4% by mass. This is useful when converting between mass of hydrate and mass of anhydrous compound.

For dilutions, use the formula C1V1 = C2V2. For example, to dilute 100 mL of 0.100 M CuSO4 to 0.025 M, you need V2 = (0.100 M × 100 mL) / 0.025 M = 400 mL. So add water to the 100 mL until the total volume is 400 mL.

Safety and Handling

Copper sulfate is an irritant to the eyes, skin, and respiratory tract. It is harmful if swallowed and is toxic to aquatic life. Always wear gloves and safety goggles when handling the powder or solutions. Do not pour copper sulfate solutions down the drain; collect them as hazardous waste according to your institution’s rules. Follow your lab method, the safety data sheet (SDS) and your supervisor.

Frequently Asked Questions

What is the formula mass of copper sulfate pentahydrate?

The formula mass of CuSO4·5H2O is 249.69 g/mol. This includes the five water molecules that are part of the crystal structure.

Is copper sulfate the same as copper sulfate pentahydrate?

No. Copper sulfate usually refers to the anhydrous form (CuSO4), while copper sulfate pentahydrate (CuSO4·5H2O) is the blue crystalline form that contains water. The pentahydrate is the common commercial form.

How do I convert between anhydrous and pentahydrate masses?

To convert from pentahydrate mass to anhydrous mass, multiply by the ratio of molar masses: 159.61 / 249.69 ≈ 0.639. So 10 g of pentahydrate contains about 6.39 g of anhydrous CuSO4.

Why does copper sulfate turn white when heated?

Heating drives off the water of crystallization, leaving anhydrous copper sulfate, which is white or pale gray. The blue color returns when water is added, which is a classic test for water.

Can I use the same molar mass for all copper sulfate products?

Only if the product is pure and has the expected hydration state. Some commercial products may be anhydrous or may have a different degree of hydration. Always check the label or certificate of analysis.

Does the molar mass change with temperature?

No, the molar mass is a constant for a given chemical composition. However, the molarity of a solution changes with temperature because the volume of the solution expands or contracts. For precise work, prepare solutions at the temperature at which you will use them.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 249.69 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →