molecalculator

Moles & Molar Mass

Liters to Bushels Conversion: How Many Bushels in a Liter?

Calculator No. 01-7233 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

One liter is equal to approximately 0.02838 US bushels (or 0.02750 imperial bushels). To convert liters to bushels, multiply the number of liters by 0.02838 for US bushels, or by 0.02750 for imperial bushels. This calculator below performs the conversion instantly for both US and imperial bushels.

Formula

The conversion uses the exact definitions of each unit:

  • US bushel: 1 US bushel = 35.23907017 liters (exactly, based on the US gallon of 231 cubic inches).
  • Imperial bushel: 1 imperial bushel = 36.36872 liters (exactly, based on the imperial gallon of 4.54609 L).

Therefore:

Bushels (US) = Liters ÷ 35.23907017

Bushels (imperial) = Liters ÷ 36.36872

Equivalently, to convert from liters to bushels, multiply by the reciprocal:

1 L = 1/35.23907017 = 0.028377593 US bushels

1 L = 1/36.36872 = 0.027496156 imperial bushels

Worked Example

Using the default input of 100 liters and the US bushel type:

  1. Start with the volume: 100 L.
  2. Divide by the US bushel volume: 100 ÷ 35.23907017 = 2.8377593.
  3. Round to 4 decimal places: 2.8378 US bushels.

The calculator shows the same result: 2.8378 bu. For imperial bushels, 100 ÷ 36.36872 = 2.7496156, which rounds to 2.7496 imperial bushels.

Assumptions

  • The US bushel is defined as 2150.42 cubic inches, which equals exactly 35.23907017 liters.
  • The imperial bushel is defined as 8 imperial gallons, which equals exactly 36.36872 liters.
  • These are volume conversions; they do not account for the weight of the material (which varies by commodity and moisture content).

Why Are There Two Different Bushels?

The bushel is an old unit of dry volume that predates the metric system. Historically, every region had its own bushel, but today two main standards survive:

  • US bushel: Used in the United States for agricultural commodities like wheat, corn, and soybeans. It is based on the Winchester bushel, standardized in the 19th century.
  • Imperial bushel: Used in the United Kingdom and some Commonwealth countries, based on the imperial gallon. It is about 3% larger than the US bushel.

When you see “bushel” in an American context, it almost always means the US bushel. In the UK, “bushel” now rarely appears in trade, but when it does, it refers to the imperial bushel.

How to Use the Calculator

Enter the volume in liters in the first field. Choose the bushel type from the dropdown (US or Imperial). The calculator will show the equivalent in bushels. The first output is the primary answer in the selected type; the second output always shows the imperial conversion for reference.

For example, if you have a 200-liter container of grain, you would enter 200, and the calculator returns 5.6755 US bushels (or 5.4992 imperial bushels).

Common Mistakes and Misconceptions

  • Confusing US and imperial bushels: A 3% difference might not matter for rough estimates, but it does for commercial transactions. Always confirm which bushel is being used.
  • Mixing volume and weight: A bushel is a volume, not a weight. However, in agriculture, a “bushel” of a commodity is often defined by a standard weight (e.g., 56 lb for corn, 60 lb for wheat). That is a separate convention; this calculator only handles volume.
  • Using the wrong conversion factor: Some sources give 1 bushel = 35.2 L (rounded). That is fine for quick mental math, but for precision, use the exact 35.23907017.

Practical Examples

Here are a few common conversions you might need:

  • A 5-gallon bucket holds about 18.93 liters. That equals 0.537 US bushels (18.93 × 0.028377593).
  • A standard 55-gallon drum holds 208.2 liters. That equals 5.908 US bushels.
  • A cubic meter (1000 liters) equals 28.3776 US bushels.

These examples show that the bushel is a fairly large unit—about 35 liters—so you rarely need more than a few bushels for small quantities.

When to Use Liters vs. Bushels

In most of the world, liters are the standard unit for liquid and dry volumes. Bushels are used almost exclusively in agriculture, particularly in North America for grains and fruits. If you are buying or selling grain in the US, you will likely deal in bushels. If you are doing science, cooking, or everyday measuring, liters are the norm.

This calculator is useful for converting between the two systems, whether you are reading an old recipe, comparing grain yields, or working with imported goods.

Frequently Asked Questions

How many liters are in a bushel?

One US bushel equals 35.23907017 liters. One imperial bushel equals 36.36872 liters. So a bushel is a bit more than 35 liters.

Is a bushel a weight or a volume?

A bushel is a unit of volume. However, in agriculture, a “bushel” of a specific commodity (like wheat) is often assigned a standard weight (e.g., 60 pounds for wheat). That weight is a separate convention, not a physical property of the bushel itself.

What is the difference between a US bushel and an imperial bushel?

The US bushel is based on the Winchester bushel (2150.42 cubic inches) and equals 35.239 liters. The imperial bushel is based on the imperial gallon (8 gallons) and equals 36.369 liters. The imperial bushel is about 3.2% larger.

How do I convert bushels to liters?

To convert bushels to liters, multiply the number of bushels by 35.23907017 (US) or by 36.36872 (imperial). For example, 2 US bushels = 2 × 35.239 = 70.48 liters.

Why do some sources say 1 bushel = 35.2 L?

That is a rounded figure for convenience. The exact value is 35.23907017 L. The difference is less than 0.1%, so the rounded value is fine for rough estimates, but not for precise calculations.

Can I use this calculator for dry goods like flour?

Yes, the conversion is purely volumetric, so it works for any substance—liquid or dry. However, note that a “pound of flour” is a weight, not a volume; if you need weight, you must also know the density of the material.

Related

Formula used
in l | Volume in liters | L | 100 | 0
sel type | Bushel type | US=1, Imperial=0.969 | 1
out b | Bushels | bu | l * 0.028377593 * type | 4
out bu_imp | Imperial bushels | bu (imp) | l * 0.027496156 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →