The density of barium nitrate (Ba(NO₃)₂) is 3.24 g/cm³ (or 3240 kg/m³) at room temperature (20–25 °C). This means a 1 cm³ cube of the solid salt weighs 3.24 grams. The value is a physical constant for the pure crystalline compound and is used in calculations involving mass, volume, and solution preparation.
Formula
Density is mass divided by volume:
ρ = m / V
- ρ – density in g/cm³ (or g/mL, numerically equal)
- m – mass of the substance in grams (g)
- V – volume occupied by that mass in cubic centimeters (cm³)
To convert to kg/m³, multiply by 1000 (since 1 g/cm³ = 1000 kg/m³). The calculator above lets you enter any mass and volume of the solid to find its density, or use it inversely: if you know the density (3.24 g/cm³) and one quantity, you can find the other.
Worked Example
Using the default values: mass = 100 g, volume = 30.86 cm³.
Step 1: Write the formula: ρ = m / V
Step 2: Substitute: ρ = 100 g / 30.86 cm³
Step 3: Divide: ρ = 3.2404… g/cm³
Step 4: Round to 3 decimal places: 3.240 g/cm³
Step 5: Convert to kg/m³: 3.240 × 1000 = 3240 kg/m³
The result matches the accepted density of barium nitrate. Notice that the volume 30.86 cm³ is exactly the volume of 100 g of the salt (because 100 / 3.24 ≈ 30.86).
Assumptions
- The solid is pure, dry, and free of trapped air or moisture.
- The measurement is at room temperature (20–25 °C); density changes slightly with temperature due to thermal expansion.
- The volume is the true bulk volume of the crystalline solid, not a powder with air gaps.
Why Barium Nitrate’s Density Matters
Barium nitrate is an inorganic salt with the formula Ba(NO₃)₂. Its density is a key property in several practical contexts:
- Solution preparation: When making a solution of known molarity, you weigh the solid, not measure its volume. Knowing the density helps if you need to estimate the volume of solid to add, or if you are using a volume-based dispensing method.
- Stoichiometry and reactions: In solid-state reactions or pyrotechnic mixtures, the density affects how much material fits in a given volume, which influences burn rates and packing.
- Safety and storage: Density, combined with solubility, helps predict whether the salt will sink or dissolve quickly in water, and how much space it occupies in storage containers.
- Identification: Density is a physical constant that can help confirm the identity of a sample, though it is rarely the primary method.
How Density Relates to Molar Mass and Crystal Structure
Barium nitrate crystallizes in the cubic system (isometric). The density arises from the arrangement of Ba²⁺ and NO₃⁻ ions in the lattice. The molar mass is 261.34 g/mol (Ba: 137.327, N: 14.007 × 2, O: 15.999 × 6). The density can be calculated from the unit cell dimensions and the number of formula units per cell, but for everyday lab work, the measured value of 3.24 g/cm³ is used directly.
For comparison, common salts have lower densities: sodium chloride (2.16 g/cm³), potassium nitrate (2.11 g/cm³). The higher density of barium nitrate reflects the heavy barium atom.
Common Mistakes and Misconceptions
- Confusing density with solubility: Density is mass per volume of the solid; solubility is how much dissolves in a solvent. They are unrelated. Barium nitrate has a solubility of about 10.5 g/100 mL water at 25 °C, but its density is 3.24 g/cm³.
- Using powder density: A loose powder has a lower bulk density (maybe 1.5–2 g/cm³) because of air between grains. The true density of the crystal is 3.24 g/cm³. Always specify whether you need bulk or true density.
- Unit errors: g/cm³ and kg/m³ differ by a factor of 1000. A common error is forgetting to convert when using density in calculations with SI units.
- Temperature variation: Density decreases slightly as temperature rises. At 100 °C, the density might be around 3.20 g/cm³, but for most lab work, room-temperature value is sufficient.
How to Measure Density in the Lab
If you need to verify the density of a sample, you can use a simple displacement method:
- Weigh an empty graduated cylinder.
- Add a known mass of barium nitrate crystals (e.g., 20 g).
- Add a non-solvent liquid (like kerosene or hexane) to a known volume, and record the total volume. The volume of the solid is the difference between the liquid volume with and without the solid.
- Divide mass by volume.
Alternatively, use a pycnometer with a non-solvent. Note that water cannot be used because barium nitrate dissolves in it.
Safety and Handling Notes
Barium nitrate is an oxidizer and is harmful if swallowed or inhaled. It can cause irritation to eyes and skin. It is not flammable itself but can intensify combustion of other materials. Always wear gloves and safety goggles, work in a ventilated area, and store it away from reducing agents and organic materials. Follow your lab method, the safety data sheet (SDS) and your supervisor.
Frequently Asked Questions
Q: What is the density of barium nitrate in g/mL?
It is 3.24 g/mL, because 1 cm³ = 1 mL. So 3.24 g/cm³ is the same as 3.24 g/mL.
Q: How does the density of barium nitrate compare to water?
Water has a density of 1.00 g/cm³, so barium nitrate is about 3.24 times denser. It will sink rapidly in water.
Q: Does the density change when it dissolves?
No, the density of the solid is a property of the crystal. When dissolved, the solution has its own density, which depends on concentration and temperature. For a 1 M solution (261.34 g/L), the solution density is approximately 1.17 g/mL, but that is a different value.
Q: Why is barium nitrate denser than other nitrate salts?
Because barium is a heavy element (atomic number 56, atomic mass 137.3). The ions pack closely in the crystal lattice, resulting in a higher mass per unit volume.
Q: Can I use the density to calculate the molarity of a solution?
Not directly. Molarity requires the mass of solute and the final volume of solution. Density of the solid helps you convert mass to volume of solid, but you still need to weigh the solute accurately. If you have the density of the solution, you can convert between mass and volume of solution, but that is a separate calculation.
Q: Is barium nitrate density affected by pressure?
For solids, pressure has a negligible effect on density at normal lab conditions. Only extreme pressures (thousands of atmospheres) would compress the crystal measurably.
Related
Formula used
in m | Mass of Ba(NO₃)₂ | g | 100 | 0 in v | Volume of solid | cm³ | 30.86 | 0 out d | Density | g/cm³ | m / v | 3 out dm | Density in kg/m³ | kg/m³ | d * 1000 | 1
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calcium Nitrate Boiling Point
- Cation Formula for Magnesium Nitrate0.0788 mol/L
- Potassium Nitrate Solubility in Water: Full Data25.9 g/100 mL
- Greenhouse Grade Potassium Nitrate: Uses & Rates0.2000 mol/L
- Molar Mass of KNO2: Formula & Calculation0.1373 mol/L
- Potassium Nitride Formula & How to Write It