The half-life decay equation is N(t) = N₀(1/2)t/t₁/₂, where N₀ is the starting amount, t is elapsed time, and t₁/₂ is the half-life. This calculator works out the remaining amount after a chosen time, using the initial amount, elapsed time, and half-life in the same time units.
Formula
The standard equation for exponential decay is:
N(t) = N₀(1/2)t/t₁/₂
Here, N(t) is the amount remaining at elapsed time t, measured in the same units as N₀; N₀ is the initial amount; t is elapsed time; and t₁/₂ is the half-life, in the same time unit as t. The calculator’s first result is N(t). It also reports the remaining fraction and percentage.
An equivalent form uses the decay constant λ:
N(t) = N₀e−λt, with λ = ln(2)/t₁/₂.
The decay constant has units of inverse time. For example, if the half-life is 5 days, λ = ln(2)/5 = 0.13863 per day. Use one time unit consistently: if t is in days, the half-life must also be in days, or both must be converted before calculation.
Worked Example
Using the calculator’s default inputs, N₀ = 100 units, t = 10 time units, and t₁/₂ = 5 time units:
- Find the number of half-lives: t/t₁/₂ = 10/5 = 2.
- Find the fraction remaining: (1/2)2 = 0.25.
- Multiply by the initial amount: N(t) = 100 × 0.25 = 25 units.
- Convert the fraction to a percentage: 0.25 × 100 = 25%.
The calculator therefore returns 25 units remaining, a fraction of 0.25, and 25%. These values describe the expected amount under the exponential-decay model; an actual measurement may differ because of sampling, instrument precision, or variation in a real system.
Assumptions
- The decay follows a constant-rate, single-exponential model, so the half-life does not change during the interval.
- The elapsed time and half-life are entered in the same units.
- The initial amount is nonnegative, and the half-life is positive.
- The result is a mathematical estimate, not a claim that individual decay events occur at evenly spaced intervals.
How Half-Life Decay Works
A half-life is the time required for an amount to fall to half its starting value under the applicable decay model. After one half-life, one-half remains; after two, one-quarter remains; after three, one-eighth remains. The reduction is multiplicative, not a fixed subtraction from the original amount.
For any elapsed time, including a fraction of a half-life, the equation gives a continuous exponential result. After half of one half-life, for example, the remaining fraction is (1/2)0.5, about 0.7071—not 0.75. A half-life is not the time until everything has disappeared: the ideal mathematical curve approaches zero but does not reach it at a finite time.
In radioactive decay, the equation describes the expected number of undecayed nuclei in a sufficiently large sample. Individual nuclear decays are random, so a small sample can show noticeable statistical fluctuations. The same mathematical form is used for other processes only when their kinetics support a constant proportional decay rate; the word “half-life” alone does not prove that a particular process follows this model.
When to Use This Equation
Use the equation when a quantity decreases exponentially and its half-life is known or can be estimated. It can help estimate radioactive material remaining, the persistence of a decaying signal, or the amount left in a suitable first-order process. The relevant process must actually follow the model, and the half-life must apply to the conditions being considered.
For radioactive isotopes, half-life is specific to the isotope. It is not the same as the time for a sample’s measured activity to halve because of a changing detector, changing geometry, or a mixture of isotopes with different half-lives. In a mixture, each isotope decays according to its own half-life; the total is generally a sum of exponential terms rather than one simple curve.
The equation can also be rearranged to find time:
t = t₁/₂ × log₂(N₀/N(t))
This rearrangement requires a positive remaining amount no greater than the initial amount. If the measured amount is larger than N₀, the result is not a positive decay time under this model; check the inputs, measurement uncertainty, or whether the process is truly exponential.
Reading Results and Avoiding Mistakes
- Match the time units. A half-life of 5 days and elapsed time of 10 days give two half-lives. Entering 10 hours instead requires converting one value so both are in hours or both are in days.
- Distinguish amount from percentage. The fraction is dimensionless; the remaining amount has the same unit as the initial amount. The percentage is the fraction multiplied by 100.
- Do not subtract one-half repeatedly from the original amount. Each interval halves what remains, not what was initially present.
- Do not confuse half-life with a guaranteed deadline. It is a characteristic of the decay curve, not a time by which every particle or molecule must have decayed.
- Keep useful precision. Rounding after every step can slightly shift the final answer. Keep the full calculator value through the calculation, then round to match the precision of the input data.
Limits and Related Measures
The model assumes a single exponential rate. It may not describe a mixture of decay pathways, a process whose rate changes with time, or a system where material enters as well as leaves. For a chain in which a parent substance produces a radioactive daughter, the daughter amount may first increase and later decrease; the one-component half-life equation alone does not describe that full history.
Half-life is related to, but distinct from, mean lifetime. For exponential decay, the mean lifetime is τ = 1/λ = t₁/₂/ln(2), approximately 1.443 times the half-life. Activity is also not identical to the number of nuclei: for radioactive decay, activity is the decay rate and is proportional to the number of undecayed nuclei when the decay constant is fixed. Its units are counts or decays per unit time, such as becquerels (one decay per second).
For measurements, the calculated answer should be interpreted alongside uncertainty in the initial amount, elapsed time, and half-life. If a reported half-life is uncertain, that uncertainty affects the predicted remaining amount, especially when many half-lives have elapsed.
Frequently Asked Questions
What is the equation for half-life decay?
N(t) = N₀(1/2)t/t₁/₂. It gives the amount remaining after elapsed time t from initial amount N₀ when the half-life is t₁/₂.
How much remains after three half-lives?
The fraction remaining is (1/2)3 = 1/8, or 12.5% of the initial amount.
How do I calculate half-life from a decay constant?
Use t₁/₂ = ln(2)/λ, where λ is the decay constant in inverse time units. The resulting half-life is in the corresponding time unit.
Does half-life depend on how much material I start with?
For a process that follows this model, the half-life is a property of the isotope or process under the stated conditions, not the starting amount. Changing N₀ changes the amount remaining, but not the fraction remaining after a given number of half-lives.
Can the half-life equation predict when all material is gone?
No. The ideal exponential equation approaches zero without reaching it at a finite time. In practice, a quantity may become too small to detect, but that is a detection limit rather than a mathematical point at which the amount becomes exactly zero.
Related
Formula used
in n0 | Initial amount | units | 100 | 0 in t | Elapsed time | time units | 10 | 0 in h | Half-life | time units | 5 | 0 out n | Remaining amount | units | n0 * 0.5 ^ (t / h) | 4 out f | Fraction remaining | - | 0.5 ^ (t / h) | 6 out p | Percent remaining | % | f * 100 | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s