molecalculator

Moles & Molar Mass

Equivalence Calculator A-Level: How It Works

Calculator No. 01-8459 · Updated · Formula and assumptions shown below

UCAS Tariff points (A-levels only) 144 points
Average grade (A*=5, A=4, B=3, C=2, D=1, E=0)
3.00 grade points
Result, rounded to 2 decimal places
Number of A-levels
3
Set in the form below
Grade for subject 1
3
Set in the form below
You enter
Number of A-levels, Grade for subject 1, Grade for subject 2, Grade for subject 3
You get
UCAS Tariff points (A-levels only) (points), Average grade (A*=5, A=4, B=3, C=2, D=1, E=0) (grade points)
Rounding
0 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

An equivalence calculator for A-levels converts your A-level grades and subjects into an equivalent score or tariff points, typically for university applications or international comparisons. You enter your subjects and grades, and it returns a total point value or an equivalent grade profile, such as UCAS Tariff points or a GPA-style number. The exact output depends on the system you are using, so this article explains the common methods, how to choose the right calculator, and what the results mean.

Formula

The calculator above uses the standard UCAS Tariff points for A-levels (for qualifications taken in 2017 and after). Each grade maps to a point value:

  • A* = 56 points
  • A = 48 points
  • B = 40 points
  • C = 32 points
  • D = 24 points
  • E = 16 points

In the calculator, grades are entered as numbers (A*=5, A=4, B=3, C=2, D=1, E=0) and multiplied by 16 to get the tariff points. The formula for total tariff points is:

Total points = (grade1 × 16) + (grade2 × 16) + (grade3 × 16)

where each grade is the numeric value for that subject. The average grade is simply the mean of the numeric grade values.

Worked Example

Using the default values: 3 A-levels, with grades A, B, and A (numeric 4, 3, 4).

  1. Convert grades to numeric: A=4, B=3, A=4.
  2. Calculate tariff points for each: 4×16=64, 3×16=48, 4×16=64.
  3. Sum: 64+48+64 = 176 points.
  4. Average grade: (4+3+4)/3 = 3.67 (on a 5-point scale).

The calculator returns 176 points and an average of 3.67.

Assumptions

  • All subjects are A-levels (not AS levels or vocational qualifications).
  • The UCAS Tariff points are for the 2017+ system (A* = 56, A = 48, etc.).
  • Each subject is counted once; no points for extended project or other qualifications.
  • Grades are the final awarded grades, not predicted grades.

Why Use an Equivalence Calculator?

An equivalence calculator is useful when you need to compare A-level results to another grading system or to a points-based requirement. Common scenarios include:

  • Applying to UK universities that ask for a specific number of UCAS points.
  • Converting A-level grades to a GPA for US or Canadian applications.
  • Checking if your A-levels meet the entry requirements for a European university that uses a percentage or grade-point system.
  • Comparing offers from different universities that express requirements differently.

Each context has its own conversion table, so the calculator you use must match the target system. For example, the UCAS Tariff is different from the International Baccalaureate (IB) points conversion or the German Numerus Clausus (NC) system.

How to Choose the Right Equivalence Calculator

Not all equivalence calculators are the same. To get an accurate result, you need to identify the specific system you are converting to. Here are the key questions to ask:

  1. What is the target system? UCAS Tariff, GPA, percentage, or a country-specific scale (e.g., German, French, Indian).
  2. What is the year of the qualification? UCAS changed its tariff in 2017, so older A-levels have different points.
  3. Does it include AS levels or only full A-levels? Some calculators include AS points, which are lower.
  4. Does it account for subject weighting? Some systems (like the UCAS tariff) do not weight subjects; others (like some university GPA conversions) might.

For university applications, always check the official website of the university or the central admissions body (e.g., UCAS) for the most authoritative conversion table. Many universities have their own equivalence tables for international qualifications.

Common Mistakes and Misconceptions

A frequent mistake is using an outdated UCAS Tariff table. Before 2017, A-level grades had different point values (e.g., A=120, B=100, etc.). If you input a grade into an old calculator, you will get a wildly different total. Always verify the tariff year.

Another misconception is that A-level grades can be directly converted to a GPA by simple arithmetic (e.g., A=4.0, B=3.0). In reality, universities often use their own conversion methods, sometimes considering the difficulty of the subject or the percentage score behind the grade. For example, a high A might be a 4.0, but a low A might be a 3.7. Without the actual percentage, a simple conversion is an approximation.

Also, be aware that the UCAS Tariff is not a measure of academic difficulty; it is a points system for comparing different qualifications. A-level points are not directly comparable to, say, BTEC points in terms of content difficulty, but they are designed to be equivalent in terms of entry requirements.

UCAS Tariff vs. GPA vs. Percentage

Three common equivalence systems are:

  • UCAS Tariff: Used in the UK for admissions to higher education. Points range from 16 (E) to 56 (A*) per A-level. Total points are summed across subjects.
  • GPA (Grade Point Average): Used in the US, Canada, and some international schools. A-level grades are often converted to a 4.0 scale, but the conversion varies by institution. A common scale is A*=4.0, A=4.0, B=3.0, C=2.0, D=1.0, E=0.0, but some schools give A=4.0 and A*=4.0 (no extra weight).
  • Percentage: Some countries (e.g., India, Germany) use percentages or a 10-point scale. A-level percentage equivalents are not standardized; universities often have their own tables. For example, a German university might equate an A-level grade of A to 1.0 (best) or 2.0 depending on the subject.

When using an equivalence calculator, you must know which system the calculator implements. The calculator on this page is specifically for UCAS Tariff points for A-levels taken from 2017 onwards.

Limitations of Equivalence Calculators

Equivalence calculators provide a rough guide, not a guarantee. They have several limitations:

  • They do not account for the specific content or difficulty of the subjects you took.
  • They do not reflect the actual percentage scores within a grade (e.g., a high A vs. a low A).
  • They may not be accepted by a particular university, which might have its own conversion policy.
  • They do not consider other factors like personal statements, references, or entrance exams.

For critical decisions like university applications, always confirm the equivalence with the admissions office of the institution you are applying to. The calculator gives you a starting point for comparison, but the final decision rests with the university.

Frequently Asked Questions

How many UCAS points is an A-level?

Under the current UCAS Tariff (2017 onwards), an A-level is worth between 16 points (grade E) and 56 points (grade A*). Specifically: A*=56, A=48, B=40, C=32, D=24, E=16. This is for a full A-level, not an AS level.

What is the difference between UCAS points and A-level grades?

UCAS points are a numerical score used to compare different qualifications (A-levels, BTECs, IB, etc.) for university entry. A-level grades are the actual grades you receive. Universities often list entry requirements in terms of grades (e.g., ‘AAB’) or UCAS points (e.g., 128 points). The two are related but not identical: 128 points could be achieved with grades like AAB (48+48+40=136) or ABB (48+40+40=128).

Can I convert my A-level grades to a GPA?

Yes, but there is no single official conversion. Many US universities use a 4.0 scale where A=4.0, B=3.0, C=2.0, D=1.0, and E=0.0. However, some institutions give A* a 4.0 and A a 4.0, while others might give A* a 4.0 and A a 3.8. You should check with the specific university or use a reputable conversion service. The result is an approximation, not an official GPA.

Are AS levels included in the UCAS Tariff?

Yes, AS levels are also in the UCAS Tariff, but they carry fewer points than A-levels. For example, an AS level at grade A is worth 20 points, while an A-level at grade A is worth 48 points. The calculator on this page only includes full A-levels; if you need to include AS levels, you must add them separately.

Does the UCAS Tariff change over time?

Yes, the UCAS Tariff was last revised in 2017. Before that, the points were different (e.g., A-level A was 120 points). If you are comparing qualifications from before 2017, you need to use the old tariff table. Always check the year of your qualification when using a calculator.

Can I use this calculator for BTEC or other qualifications?

No, this calculator is specifically for A-levels. BTEC qualifications have their own UCAS Tariff points, which are different (e.g., a BTEC Extended Diploma at D*D*D* is worth 168 points). To convert BTECs, you need a calculator that includes those qualifications.

Related

Formula used
in n | Number of A-levels | - | 3 | 1 | 6
in a1 | Grade for subject 1 | - | 3 | 0 | 5
in a2 | Grade for subject 2 | - | 3 | 0 | 5
in a3 | Grade for subject 3 | - | 3 | 0 | 5
out tariff | UCAS Tariff points (A-levels only) | points | (a1 * 16) + (a2 * 16) + (a3 * 16) | 0
out avg | Average grade (A*=5, A=4, B=3, C=2, D=1, E=0) | grade points | (a1 + a2 + a3) / n | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →