Gas volume per mole is called molar volume: the volume occupied by one mole of gas at a specified temperature and pressure. For an ideal gas at 0 °C and 1 atm, it is about 22.414 L/mol; at 0 °C and 1 bar, it is about 22.711 L/mol. This calculator uses the ideal gas law: enter the amount of gas, temperature, and pressure to find its volume per mole.
Formula
The ideal gas law is PV = nRT. Rearranging it for volume per mole gives Vm = V/n = RT/P. Here, Vm is molar volume in L/mol, T is absolute temperature in kelvins, P is absolute pressure in pascals, and R is the gas constant, 8.31446261815324 J/(mol·K). Because 1 J = 1 Pa·m³, this form produces m³/mol; converting to L/mol multiplies by 1000. The calculator instead uses the equivalent R = 8.31446261815324 kPa·L/(mol·K), converts temperature from Celsius with +273.15, and reports L/mol. Its pressure input is in kPa.
The other output, V, is the total ideal-gas volume in litres: multiply the amount n in mol by Vm. Since the same temperature and pressure apply to both outputs, the amount cancels when calculating volume per mole. The amount is still useful for calculating the total volume.
Worked Example
Using the defaults: n = 1 mol, t = 0 °C, and p = 101.325 kPa. First convert temperature: T = 0 + 273.15 = 273.15 K. Then calculate molar volume using the equivalent gas constant in kPa·L units:
Vm = (8.31446261815324 × 273.15) / 101.325 = 22.41396954 L/mol, which rounds to 22.413970 L/mol at six decimal places.
Total volume is V = n × Vm = 1 × 22.41396954 = 22.41396954 L, or 22.413970 L at six decimal places.
Assumptions
- The gas behaves ideally: its particles are treated as having negligible volume and negligible intermolecular forces.
- Temperature is converted from °C to K by adding 273.15; the entered pressure is absolute pressure, not gauge pressure.
- The formula assumes the gas amount, temperature, and pressure describe the same sample and state.
What Molar Volume Means
A mole is a fixed amount of substance, equal to exactly 6.02214076 × 1023 specified entities. Molar volume expresses a gas’s volume divided by the amount in moles. It is not one universal volume for every gas: under the ideal-gas model, it depends on temperature and pressure, not on the identity of the gas. Real gases can show substance-dependent deviations, particularly when pressure is high or temperature is near condensation.
At a fixed temperature and pressure, Avogadro’s law says equal amounts of ideal gases occupy equal volumes. Thus one mole of nitrogen and one mole of helium have the same ideal molar volume at the same conditions, even though their masses differ greatly. Their volumes need not match if their temperatures or pressures differ.
Why STP Values Differ
“Standard temperature and pressure” is used in more than one convention, so a quoted molar volume is meaningful only when the reference conditions are stated. At 0 °C, or 273.15 K, the ideal molar volume is about 22.414 L/mol at 1 atm (101.325 kPa). At the same temperature but 1 bar (100 kPa), it is about 22.711 L/mol. The lower pressure gives a larger volume, as the gas law predicts.
Other reference conditions are also used. For example, at 25 °C and 1 atm the ideal value is about 24.466 L/mol. Always check both temperature and pressure before comparing a textbook value, a laboratory result, or a gas-volume calculation. STP is not a guarantee that a real gas has exactly the ideal value.
How to Use the Calculator and Interpret the Result
- Enter the amount in moles. This changes the total-volume output, but not the molar-volume output.
- Enter the gas temperature in °C. The calculator converts it to kelvins internally.
- Enter absolute pressure in kPa. For example, 1 atm is 101.325 kPa and 1 bar is 100 kPa.
- Read the first result as litres per mole and the second as litres for the entered amount.
For a quick check, doubling the absolute temperature while keeping pressure constant doubles the ideal molar volume. Doubling pressure at constant temperature halves it. Celsius temperature cannot be used directly in the gas-law equation: 0 °C is 273.15 K, not zero kelvins.
Common Errors and Limits
The most frequent error is mixing units. The calculator expects kPa and °C; entering a pressure in atmospheres as though it were kPa would produce a result about 101 times too large. Convert 1 atm to 101.325 kPa, and use absolute rather than gauge pressure. Gauge pressure is measured relative to surrounding air; for a gas-law calculation, add the local atmospheric pressure to obtain absolute pressure.
The ideal-gas equation is an approximation. It is usually a useful model at relatively low pressure and sufficiently high temperature, but real-gas interactions become more important at high pressure and near a gas’s condensation point. If high accuracy matters under such conditions, use measured density or an appropriate real-gas equation of state with reliable substance-specific data. Do not treat the calculator’s output as a measured value.
Rounding can also cause small apparent differences. The calculator displays six decimal places, while reference tables may use fewer digits, a different pressure convention, or real-gas measurements. Keep extra digits through intermediate calculations and round at the end to a precision justified by the input data.
Frequently Asked Questions
What is the volume of one mole of gas at STP?
At 0 °C and 1 atm, the ideal-gas value is about 22.414 L/mol. Some definitions use 1 bar instead of 1 atm; at 0 °C and 1 bar, it is about 22.711 L/mol.
Is 22.4 L the volume of every mole of gas?
No. It is a rounded value for an ideal gas at approximately 0 °C and 1 atm. Temperature and pressure change molar volume, and real gases may differ from the ideal prediction.
Does gas identity affect molar volume?
In the ideal-gas model, no: at the same temperature and pressure, equal mole amounts occupy equal volumes. For real gases, molecular interactions can cause differences, especially under demanding conditions.
How do I calculate gas volume from moles?
Use V = nRT/P, with absolute temperature in kelvins and absolute pressure in consistent units. Alternatively, calculate Vm = RT/P and multiply it by the amount in moles.
Why does a gas occupy more volume when heated?
At constant pressure and fixed amount, the ideal-gas law gives V proportional to absolute temperature. Heating increases volume in proportion to kelvins, not degrees Celsius.
Should I use gauge or absolute pressure?
Use absolute pressure, measured from a vacuum. If you have gauge pressure, add the surrounding atmospheric pressure before applying the gas law.
Related
Formula used
in n | Amount of gas | mol | 1 | 0 in t | Temperature | °C | 0 | -273.15 in p | Pressure | kPa | 101.325 | 0.000001 out vm | Gas volume per mole | L/mol | (8.31446261815324 * (t + 273.15) / (p / 101.325)) / 1000 | 6 out v | Gas volume | L | n * vm | 6
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s