This calculator estimates the worth of dilution: the reduction in an existing owner’s share of a company when new shares are issued. Enter current shares, your holding, the new shares and the company’s pre-money value to see your ownership change and the estimated value of the stake before and after dilution. It is a simplified equity calculation, not a valuation or investment recommendation.
Formula
The calculator compares the value of your ownership before and after issuing new shares, holding the pre-money share price constant for the dilution comparison.
Dilution value = pre-money company value × your shares ÷ old shares outstanding − pre-money company value × your shares ÷ (old shares outstanding + new shares issued).
- V is the pre-money company value, in currency units.
- H is the number of shares you own before the financing.
- O is the total number of shares outstanding before financing.
- N is the number of new shares issued.
- Ownership before is H ÷ O × 100%.
- Ownership after is H ÷ (O + N) × 100%.
The share price implied by the pre-money value is V ÷ O. The first output, “worth of dilution,” is the old-price value of the ownership percentage you give up. It is not automatically a cash loss: the financing also brings money or other consideration into the company. Output A estimates your post-financing stake value under the simplified assumption that the company’s post-money value equals its pre-money value plus the cash paid for the newly issued shares. Currency units are whatever units you use for V; shares and values must use consistent definitions.
Worked Example
Use the calculator’s defaults: O = 1,000,000 shares; H = 100,000 shares; N = 250,000 shares; and V = 4,000,000 currency units.
- Calculate your pre-financing ownership: 100,000 ÷ 1,000,000 × 100 = 10.00%.
- Calculate total shares after issuance: 1,000,000 + 250,000 = 1,250,000 shares.
- Calculate your post-financing ownership: 100,000 ÷ 1,250,000 × 100 = 8.00%.
- Calculate the pre-money implied share price: 4,000,000 ÷ 1,000,000 = 4 currency units per share.
- Value your holding at that price before financing: 100,000 × 4 = 400,000 currency units.
- Value the same holding at the old share price after issuance: 100,000 × 4 = 400,000 currency units. This comparison alone would show no change because it holds the price fixed, so the calculator’s dilution-value formula instead measures the value of the ownership percentage lost: 4,000,000 × (0.10 − 0.08) = 80,000 currency units.
- For context, new shares are sold at the implied pre-money price in this example, raising 250,000 × 4 = 1,000,000 currency units. The post-money value assumed is 4,000,000 + 1,000,000 = 5,000,000. Your post-financing stake value is 5,000,000 × 100,000 ÷ 1,250,000 = 400,000 currency units.
The calculator outputs 80,000.00 for worth of dilution, 10.00% before, 8.00% after and 400,000.00 for the simplified post-financing stake value. The dilution-value output is the pre-money value of the 2-percentage-point ownership reduction; it should not be confused with the change in the market or negotiated value of your shares.
Assumptions
- New shares are issued at the pre-money price implied by V ÷ O.
- O includes all shares counted in the selected ownership basis; options, warrants, convertibles and reserved pools are excluded unless included in O and N.
- There are no fees, taxes, liquidation preferences, changes in share class rights or changes in valuation beyond the financing cash.
- The company receives cash equal to the new shares issued multiplied by the implied share price. If consideration is non-cash or the issue price differs, calculate the post-money value separately.
Step-by-Step
- Choose the meaning of “worth.” This calculator reports the pre-money value of the ownership percentage lost. For an investor’s economic outcome, also consider the financing price, cash raised, security terms and any change in company valuation.
- Set the share-count basis. Use either issued-and-outstanding shares or a fully diluted count, but do not mix them. A fully diluted basis may include options, warrants and convertible securities as if converted. Check the cap table or financing terms for the intended convention.
- Enter old shares outstanding. O must be greater than zero. Use the total share count immediately before the new issuance, on the same basis you use for your holding.
- Enter your existing shares. H is your holding before the financing. It cannot exceed O. This simple calculator does not model buying additional shares in the round.
- Enter the new shares issued. N is the number issued to all new investors in the transaction, not just the shares purchased by one investor. Include any shares newly created in the financing if the selected share-count basis requires them.
- Enter the pre-money value. V is the negotiated value immediately before the new investment. Keep its currency consistent with any later comparison. The calculator treats it as a given input; it cannot determine whether that valuation is fair.
- Read the ownership percentages. Compare the before and after figures. The percentage-point decrease is not the same as the percentage reduction in your original ownership. For example, moving from 10% to 8% is a 2-point decrease and a 20% relative reduction.
- Interpret the value outputs carefully. “Worth of dilution” prices the lost percentage at the pre-money value. Output A adds the assumed cash proceeds to the company value before valuing your remaining stake. Compare these figures with the actual term sheet and share rights, not in isolation.
Common Mistakes
- Using only the new investor’s shares. The denominator must include every share issued in the round.
- Mixing share-count conventions. Comparing your fully diluted holding with an issued-only total can give a misleading percentage.
- Treating dilution as a guaranteed loss of money. Ownership falls, but company value may rise when new capital is invested, and share price or rights may change.
- Confusing percent with percentage points. A fall from 10% to 8% is 2 percentage points, or a 20% proportional reduction.
- Assuming every financing sells at the pre-money price. Discounts, different share classes, warrants or other terms can make the effective price different.
- Rounding share counts or percentages too early. Keep exact share counts in calculations and round only the displayed result.
Tips
- Run the calculation for both basic and fully diluted share counts when the financing documents present both.
- Check whether an employee option pool is created or enlarged before the investment; that change can affect existing owners’ percentages.
- Use the same currency and valuation date throughout. A pre-money value is not necessarily the company’s current market value.
- For several financing rounds, update O, H and the company value after each event, then calculate the next round from those updated figures.
- For legal, tax or investment decisions, review the governing documents with a qualified professional; this arithmetic does not model special rights or future outcomes.
Troubleshooting
If the result is rejected or looks impossible, check that O is positive, H is not greater than O, and N and V are not negative. If ownership after financing does not match your cap table, verify whether options, warrants, convertibles or an option-pool increase belong in the denominator. If the dilution value seems larger than your holding’s value, confirm that V and share counts use the same basis and that the value is pre-money, not post-money. If the actual round price differs from V ÷ O, this calculator’s simplifying price assumption does not fit; recalculate using the negotiated share price and actual post-money valuation, or use a cap-table model that accounts for the financing terms.
Frequently Asked Questions
Is dilution always bad for an existing shareholder?
No. The ownership percentage decreases, but the company may receive capital that supports growth. The effect on the value of your stake depends on valuation, price and share rights.
What does “worth of dilution” mean here?
It is the pre-money value multiplied by the difference between your old and new ownership percentages. It is a comparison measure, not necessarily money lost or received.
Do I use pre-money or post-money valuation?
Enter pre-money value in this calculator. The simplified post-money value shown in output A is pre-money value plus the assumed proceeds from issuing new shares.
Should I include options in the share count?
Use the basis specified by your financing documents. If they report fully diluted ownership, include the relevant options and other convertible securities consistently in both the total and your holding basis.
Can dilution be calculated when the share price changes?
Yes, but this basic formula’s “worth” output fixes the comparison to the pre-money valuation. To estimate economic value at a changed price, use the actual post-money valuation or share price and account for the security terms.
Does this calculate the value of my company?
No. It uses the pre-money value you enter and calculates ownership effects. It does not assess a company’s fair value or forecast future performance.
Related
Formula used
in o | Shares outstanding before financing | shares | 1000000 | 1 in h | Your shares before financing | shares | 100000 | 0 in n | New shares issued | shares | 250000 | 0 in v | Company pre-money value | currency units | 4000000 | 0 out d | Worth of dilution as reduction in stake value at pre-money price | currency units | v * h / o - v * h / (o + n) | 2 out p | Ownership before financing | % | 100 * h / o | 2 out q | Ownership after financing | % | 100 * h / (o + n) | 2 out a | Stake value after financing, including new cash | currency units | (v + v * n / o) * h / (o + n) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s