Intracellular potassium (K⁺) concentration in many animal cells is typically about 120–150 mmol/L (mM), although the exact value varies by cell type and conditions. This calculator estimates concentration from the amount of potassium and the cell’s intracellular water volume; enter those values to get molarity and millimolar concentration.
Formula
Concentration is the amount of dissolved potassium divided by the volume of the solution: C = n / V. In this calculator, C is intracellular potassium concentration in mmol/L, n is the amount of potassium in millimoles (mmol), and V is the intracellular water volume in liters (L). Because 1 mmol/L equals 1 mM, the first result is also the numerical value in millimolar. The second result converts mmol/L to mol/L by dividing by 1,000.
Worked Example
Using the calculator’s defaults, the amount is 140 mmol and the volume is 1 L.
- Concentration: 140 mmol / 1 L = 140 mmol/L, or 140.00 mM.
- In molar units: 140.00 mmol/L / 1,000 = 0.1400 mol/L.
This is a simple concentration calculation, not a direct measurement of a particular cell. The default amount and volume are illustrative inputs, not universal values for a cell or tissue.
Assumptions
- The amount entered represents potassium ions (K⁺) in the intracellular compartment being considered.
- The volume entered is intracellular water volume, not total tissue volume or the volume of surrounding fluid.
- The amount and volume refer to the same compartment and time point.
- The calculator treats the supplied amount and volume as known values; it does not estimate either from a cell model.
Typical Intracellular Potassium Levels
Potassium is the main positively charged ion inside most animal cells. A commonly cited broad range for intracellular concentration is roughly 120–150 mM. This contrasts with extracellular fluid, where potassium is usually around 3.5–5 mM in healthy physiological conditions. The difference is maintained by selective membrane permeability and active transport, especially the sodium-potassium pump.
These are reference ranges, not fixed constants. Concentration varies among cell types and can shift with cell activity, development, environmental conditions, and disease. “Intracellular concentration” also needs a clearly defined compartment: a whole-cell average can differ from concentrations near membranes or inside organelles. Potassium in the cytosol is not necessarily distributed identically throughout a cell.
Concentration is the amount per volume, not the total number of potassium ions. A large cell can contain more total potassium than a small cell while having the same concentration. Conversely, the same amount of potassium in a smaller water volume produces a higher calculated concentration.
Why Cells Maintain a Potassium Gradient
The potassium gradient across a cell membrane is important to electrical signaling, transport, and cell-volume regulation. The sodium-potassium pump uses energy from ATP to move three sodium ions out of the cell for every two potassium ions moved in. This active transport helps maintain high intracellular potassium and low intracellular sodium.
Many membrane channels allow potassium to move down its electrochemical gradient. The balance between active transport, channel permeability, and other ion movements contributes to the membrane potential. In excitable cells such as neurons and muscle cells, changes in ion-channel activity can alter voltage rapidly. Potassium concentration is therefore one part of a larger system: membrane voltage also depends on other ions, their gradients, and membrane permeability.
A common misconception is that a high intracellular concentration means potassium is continually being pumped into every cell at a constant rate. In reality, cells regulate transport and channel activity; the net movement at a given moment depends on the cell’s state and the forces acting across its membrane.
Using the Calculator and Interpreting Results
Enter the number of millimoles of potassium in the relevant compartment and its intracellular water volume in liters. The calculator divides amount by volume, then reports the result in mmol/L and mol/L. Check that the inputs describe the same cell population or compartment; mixing an amount measured for a sample with a volume measured for a different sample will make the result meaningless.
- Convert micromoles to millimoles before entering: 1,000 µmol = 1 mmol.
- Convert milliliters to liters before entering: 1,000 mL = 1 L.
- Do not enter potassium mass in milligrams as if it were an amount in mmol. A mass must first be converted using the molar mass of potassium, about 39.10 g/mol.
- Keep units visible through the calculation; mmol divided by L gives mmol/L.
For example, 14 mmol in 0.1 L gives 140 mmol/L. If the volume were entered as 100 rather than 0.1, the result would be 0.14 mmol/L, a thousand-fold unit error. The formula itself cannot detect this kind of mistake.
Measurement, Limits, and Related Comparisons
The calculator is useful when the amount and volume are already known, or when checking a concentration derived from experimental data. It does not determine intracellular potassium from a blood test, infer cell volume, or account for potassium bound to or associated with cellular components. Methods used to measure cellular ions may report different quantities depending on whether they assess total cell content, free ion activity, or a specific compartment.
Concentration and ion activity are also not identical. Concentration counts the amount per volume, while activity describes the effective chemical availability of ions in a solution; interactions with other solutes can make the two differ. For many basic comparisons, concentration is the appropriate reported quantity, but specialized physiological or analytical work may distinguish them.
Intracellular and extracellular figures should be compared only when the measurement context is clear. Plasma potassium is an extracellular measurement and is not a direct estimate of potassium inside cells. A blood value should not be substituted into this calculator as an intracellular input. If a result is used for laboratory planning, follow your lab method, the safety data sheet (SDS) and your supervisor.
Frequently Asked Questions
What is the normal intracellular potassium concentration?
Many animal cells are commonly described as having approximately 120–150 mM intracellular potassium. The exact value depends on the cell type, compartment, and measurement conditions.
Is intracellular potassium the same as blood potassium?
No. Blood tests generally measure potassium in the extracellular fluid portion of blood, not the concentration inside cells. The intracellular concentration is usually much higher.
How do you calculate intracellular potassium concentration?
Divide the amount of potassium by the intracellular water volume. With amount in mmol and volume in liters, the result is mmol/L, numerically equivalent to mM.
Why is potassium higher inside cells?
The sodium-potassium pump and selective membrane permeability maintain a concentration gradient, with potassium generally higher inside and sodium higher outside animal cells.
Does a higher intracellular concentration mean a cell contains more potassium?
Not necessarily. Concentration is amount per volume. A smaller cell can have a higher concentration but contain less total potassium than a larger cell.
Related
Formula used
in n | Amount of potassium | mmol | 140 | 0 in v | Intracellular water volume | L | 1 | 0.000000001 out c | Intracellular K⁺ concentration | mmol/L | n / v | 2 out cm | Concentration in molar units | mol/L | c / 1000 | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s