This calculator converts a volume in cubic feet to liters: enter the cubic-foot value and it returns the equivalent volume in liters. One cubic foot is exactly 28.316846592 liters, so multiply cubic feet by 28.316846592.
Formula
Liters = cubic feet × 28.316846592. The input ft3 is volume in cubic feet (ft³); the output l is volume in liters (L). The conversion factor is exact: 1 ft³ = 28.316846592 L. The calculator also echoes the original volume in cubic feet as a check.
Worked Example
Using the default input of 1 ft³:
- Apply the conversion factor: 1 ft³ × 28.316846592 L/ft³ = 28.316846592 L.
- Round to the calculator’s three decimal places: 28.317 L.
Therefore, one cubic foot contains about 28.317 liters. The unrounded result is useful when carrying a conversion into another calculation; for an ordinary estimate, 28.3 L is usually adequate.
Assumptions
- The input represents a volume, not a length or an area.
- The conversion uses the international foot, exactly 0.3048 m, and the liter, exactly 0.001 m³.
- The displayed result is rounded to three decimal places; the conversion itself is not approximate.
Why the Conversion Factor Is 28.316846592
A cubic foot is the volume of a cube whose sides are each one foot long. Since one international foot is exactly 0.3048 meters, one cubic foot is (0.3048 m)³ = 0.028316846592 m³. A liter is exactly 0.001 cubic meter, so dividing by 0.001 converts that volume to 28.316846592 L.
This relationship is a fixed unit conversion, not a measurement of a particular substance. A cubic foot of water and a cubic foot of air occupy the same volume, although they have very different masses. To find mass from volume, density is also needed, and density depends on the substance and, in some cases, temperature and pressure.
Quick Conversions and Examples
For fast estimates, multiply the number of cubic feet by 28.3168. The table shows several common amounts, rounded to three decimal places:
- 0.1 ft³ = 2.832 L
- 0.5 ft³ = 14.158 L
- 1 ft³ = 28.317 L
- 2 ft³ = 56.634 L
- 10 ft³ = 283.168 L
For example, a container with an internal volume of 3 ft³ holds 3 × 28.316846592 = 84.950539776 L, or about 84.951 L. Its actual usable capacity may be lower if the container has thick walls, rounded corners, internal fittings, or a fill limit.
Converting Liters Back to Cubic Feet
To reverse the conversion, divide liters by 28.316846592, or multiply liters by approximately 0.0353146667:
Cubic feet = liters ÷ 28.316846592.
For instance, 100 L ÷ 28.316846592 = about 3.531 ft³. Avoid using the forward factor when converting back: multiplying by 28.3168 would make the result much larger instead of returning to the original scale.
Choosing Precision and Avoiding Mistakes
The exact factor is useful for calculations, but the answer should not imply more precision than the original measurement supports. If a rough estimate is “about 2 ft³,” reporting a long string of decimal places is misleading; “about 56.6 L” is more appropriate. For an engineering specification or a chain of calculations, keep extra digits during intermediate steps and round the final result to match the measurement and purpose.
- Check the unit: ft³ is cubic feet. A value in square feet (ft²) describes area and cannot be converted directly to liters.
- Use the internal dimensions: For a box-shaped container, calculate length × width × height using the same length unit, then convert the resulting volume. External dimensions include the material thickness.
- Match units before multiplying dimensions: Three dimensions in feet produce ft³. Mixing feet and inches without conversion gives an incorrect volume.
- Distinguish capacity from volume: A stated container capacity may already be in liters or gallons. Do not apply the conversion twice.
A common misconception is that “28 liters” is exactly one cubic foot. It is a convenient rounded estimate, but it is 0.316846592 L short of the exact value. The difference is small for rough planning but can matter across many cubic feet or when specifying a tight capacity.
When This Conversion Is Useful
Cubic feet are common in building dimensions, storage descriptions, appliance specifications, and some freight or material calculations. Liters are widely used for liquid capacity and metric measurements. Converting between them lets readers compare specifications expressed in different systems, estimate the contents of a space, or communicate volume consistently.
For a rectangular space, multiply its length, width, and height to get cubic feet if all three dimensions are in feet. Convert the result to liters with the factor above. A non-rectangular space may require dividing it into simpler shapes or using a separate measurement method; the conversion factor cannot correct an inaccurate estimate of the original volume.
Frequently Asked Questions
How many liters are in one cubic foot?
One cubic foot equals exactly 28.316846592 liters, commonly rounded to 28.317 L or 28.3 L.
How do I convert cubic feet to liters?
Multiply the cubic-foot measurement by 28.316846592. For example, 4 ft³ is 113.267386368 L, about 113.267 L.
How many cubic feet are in 100 liters?
Divide 100 by 28.316846592. The result is approximately 3.531 ft³.
Is a cubic foot the same as 28 liters?
Not exactly. Twenty-eight liters is a rough estimate; the exact value is 28.316846592 L.
Does a cubic foot of water weigh 28.3 kilograms?
Not as a unit conversion. Liters measure volume and kilograms measure mass. Water’s mass depends on its density and temperature; near ordinary room conditions, 28.3 L of water has a mass close to 28.3 kg, but that is a separate density-based calculation.
Can I convert square feet to liters?
No. Square feet measure area, while liters measure volume. You need a third dimension, such as depth or height, to calculate volume before converting.
Related
Formula used
in ft3 | Volume | ft³ | 1 | 0 out l | Volume | L | ft3 * 28.316846592 | 3 out ft3 | Original volume | ft³ | ft3 | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s