molecalculator

Moles & Molar Mass

Liter to Quarts Conversion Calculator and Formula

Calculator No. 01-6304 · Updated · Formula and assumptions shown below

US liquid quarts 1.0567 qt
Reverse check
1.0000 L
= US liquid quarts × 946.352946 ÷ 1000
Volume
1 L
Set in the form below
You enter
Volume (L)
You get
US liquid quarts (qt), Reverse check (L)
Rounding
4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This liter-to-quarts conversion calculator converts a volume in liters to US liquid quarts, the customary quart used in most US recipes and everyday measurements. Enter liters to get the equivalent US liquid quarts, with the conversion factor and a reverse conversion for checking your result.

Formula

One US liquid quart is exactly one quarter of a US liquid gallon. A US gallon is defined as 231 cubic inches, and the inch is exactly 2.54 centimeters. This makes one US liquid quart exactly 946.352946 milliliters, or 0.946352946 liters.

US liquid quarts = liters × 1,000 ÷ 946.352946

  • Liters (L): the volume entered in the calculator.
  • 1,000: milliliters per liter, used to express the input in milliliters.
  • 946.352946 mL: milliliters in one US liquid quart.
  • US liquid quarts (qt): the converted volume.

The reverse check converts the calculated quart value back to liters: liters = US liquid quarts × 946.352946 ÷ 1,000. The calculator displays four digits after the decimal point; the underlying conversion is not limited to four decimal places.

Worked Example

For the default input of 1 L:

  1. Convert liters to milliliters: 1 L × 1,000 = 1,000 mL.
  2. Divide by the number of milliliters in a US liquid quart: 1,000 mL ÷ 946.352946 mL/qt ≈ 1.056688 qt.
  3. Rounded to the calculator’s four decimal places: 1.0567 US liquid quarts.

The reverse check is 1.056688 qt × 946.352946 mL/qt ÷ 1,000 ≈ 1.000000 L, returning the original volume apart from rounding.

Assumptions

  • The result uses the US liquid quart, not the US dry quart or the Imperial quart.
  • The input is a volume in liters; it is not a mass or a weight.
  • The conversion is a unit definition and does not depend on temperature, density, or the substance being measured.
  • The output is rounded to four decimal places for readability. Keep more precision if rounding could affect a calculation that follows.

How to Use the Conversion

Enter any nonnegative liter value in the calculator. It multiplies the volume by 1,000 to convert liters to milliliters, then divides by 946.352946 to obtain US liquid quarts. The reverse-check output converts the displayed quart value back into liters, which is useful for spotting a mistaken factor or unit selection.

For instance, 2 L is about 2.1134 US liquid quarts, while 0.5 L is about 0.5283 US liquid quarts. For a larger amount such as 10 L, the result is about 10.5669 US liquid quarts. These are volume equivalents: they do not imply that a liter of one substance weighs the same as a quart of another.

You can also do the calculation without a calculator by multiplying liters by approximately 1.056688. For a quick estimate, 1 L is close to 1.06 US liquid quarts. Use the full factor when accuracy matters, and round only at the end rather than rounding the conversion factor first.

US, Imperial, and Dry Quarts

“Quart” does not identify one universal volume. The US liquid quart is 0.946352946 L. The Imperial quart, used in the British Imperial system, is 1.1365225 L. A US dry quart is a separate unit of dry volume and is approximately 1.101221 L. Because these units differ, the calculator labels its output specifically as US liquid quarts.

  • US liquid quart: 0.946352946 L; common for US liquid-volume measurements.
  • Imperial quart: 1.1365225 L; larger than a US liquid quart.
  • US dry quart: approximately 1.101221 L; used for dry-volume contexts, not interchangeable with a liquid quart.

As a comparison, 1 L is about 1.0567 US liquid quarts but about 0.8799 Imperial quarts. A conversion that omits the system can therefore be misleading even when its arithmetic is correct.

Common Mistakes and Rounding

  • Using the wrong quart: Check whether the source specifies US liquid, Imperial, or US dry quarts before converting.
  • Reversing the factor: To convert liters to US liquid quarts, multiply by about 1.056688. To convert quarts to liters, multiply by 0.946352946.
  • Confusing liters with kilograms: Liters measure volume; kilograms measure mass. Converting between them requires the substance’s density and appropriate conditions.
  • Rounding too early: Retain the full factor through intermediate steps, then round the final value to suit the measuring task.
  • Assuming a container’s label guarantees its actual fill: The calculator converts stated volumes; it does not measure a container or account for filling tolerances.

For ordinary kitchen estimates, a few decimal places may be more than enough. In scientific or technical work, follow the precision requirements of the method and the precision of the measured input; extra displayed digits do not make an imprecise measurement more accurate.

Frequently Asked Questions

How many quarts are in a liter?
One liter equals approximately 1.056688 US liquid quarts. The exact conversion used here is 1 L ÷ 0.946352946 L per US liquid quart.

How many liters are in a US quart?
One US liquid quart equals exactly 0.946352946 L. This calculator’s reverse-check formula uses that value.

Is a liter bigger than a quart?
A liter is slightly larger than a US liquid quart: it is about 1.0567 US liquid quarts. It is smaller than an Imperial quart, which is about 1.1365 L.

Does this calculator convert to Imperial quarts?
No. Its output is US liquid quarts. For Imperial quarts, divide liters by 1.1365225 L per Imperial quart, or multiply liters by approximately 0.879877.

Can I use this for dry ingredients?
The arithmetic converts volumes, but the correct unit depends on the measurement system. US dry quarts differ from US liquid quarts, and volume-to-mass conversion also requires the ingredient’s density.

How do I convert quarts back to liters?
Multiply US liquid quarts by 0.946352946 to get liters. For example, 2 US liquid quarts equal 1.892705892 L.

Related

Formula used
in l | Volume | L | 1 | 0
out qt | US liquid quarts | qt | l * 1000 / 946.352946 | 4
out lcheck | Reverse check | L | qt * 946.352946 / 1000 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →