This litres per 100 calculator converts fuel used and distance travelled into fuel consumption in litres per 100 kilometres (L/100 km). Enter the litres of fuel and the kilometres driven to get the consumption figure, plus the equivalent distance per litre.
Formula
Fuel consumption in litres per 100 kilometres is fuel used divided by distance travelled, multiplied by 100:
C = (F ÷ D) × 100
- C is fuel consumption in L/100 km.
- F is the amount of fuel used, in litres (L).
- D is the distance travelled, in kilometres (km).
The second output is distance per litre: E = D ÷ F, measured in km/L. The calculator uses the units shown, so convert miles to kilometres and gallons to litres before entering values. Distance must be greater than zero for the main result to be defined; fuel used must also be greater than zero to calculate km/L.
Worked Example
Using the calculator’s default values, 8 L of fuel is used over 100 km.
- Divide fuel used by distance: 8 L ÷ 100 km = 0.08 L/km.
- Multiply by 100 km: 0.08 × 100 = 8.00 L/100 km.
- For the distance-per-litre comparison: 100 km ÷ 8 L = 12.50 km/L.
Assumptions
- The fuel and distance figures describe the same journey or measurement period.
- Fuel use is represented by the volume in litres entered; no adjustment is made for fuel temperature, vehicle load, route, or driving conditions.
- The calculation reports an average, not a prediction of future consumption.
- The distance is positive, and the amount of fuel used is positive for both outputs.
How to Use the Result
L/100 km is a consumption rate: it tells you how many litres a vehicle uses to travel 100 km. A smaller number means less fuel is needed for the same distance, assuming comparable conditions. For example, 6 L/100 km indicates lower fuel use per 100 km than 9 L/100 km.
The result is useful for comparing vehicles, estimating trip fuel requirements, and checking changes in driving or operating conditions. To estimate fuel for a planned distance, multiply the rate by the distance and divide by 100. At 8 L/100 km, a 250 km journey would use an estimated 8 × 250 ÷ 100 = 20 L. This is an estimate: traffic, speed, weather, terrain, load, and vehicle condition can change actual use.
For a cost estimate, multiply estimated litres by the fuel price per litre. The calculator does not provide a price because fuel prices vary by location and date. If your vehicle’s display reports average consumption, compare it over a similar distance and under similar conditions rather than treating one short trip as a definitive measure.
Getting Reliable Inputs
Use fuel actually consumed over the distance being measured. A common practical approach is to record the odometer at the start and end of a period and determine the litres used during that same period. If you are using a refill record, take care that the fuel quantity and distance correspond to the same interval; mixing fuel from one interval with distance from another produces a misleading average.
- Record distance in kilometres. If the odometer reports miles, multiply miles by 1.609344 to convert to kilometres.
- Record fuel in litres. If a receipt or record uses another volume unit, convert it to litres first.
- Use enough distance to smooth out small measurement differences. A short trip can be strongly affected by idling, warm-up, and stop-and-go traffic.
- Keep the measurement approach consistent when comparing results, including the same units and a similar refuelling or recording method.
Understanding the Units and Comparisons
L/100 km and km/L express related but differently framed measures. L/100 km describes fuel needed for a fixed distance; km/L describes distance covered per fixed quantity of fuel. Their relationship is reciprocal after accounting for the 100 km basis:
km/L = 100 ÷ (L/100 km), and L/100 km = 100 ÷ (km/L).
For example, 8 L/100 km corresponds to 12.5 km/L. A frequent misconception is that a higher number is always more efficient. That is true for km/L, but not for L/100 km: lower L/100 km means lower fuel consumption. The two figures should not be compared directly without conversion.
US miles per gallon (US mpg) and imperial miles per gallon (UK mpg) are different measures because the gallon sizes differ. To compare a published mpg figure with this calculator, identify which gallon convention is used and convert it, rather than assuming “mpg” has a single universal value. Fuel-economy labels and reporting conventions can also differ between countries.
Common Problems and Limits
- Mixing units: Entering miles as if they were kilometres or gallons as if they were litres changes the answer substantially.
- Using mismatched periods: Fuel and distance must cover the same interval. Otherwise the calculated average is not meaningful.
- Rounding too early: Keep the recorded values as precise as practical and round only the final display. The calculator shows two decimal places, which is a presentation choice, not a claim that the measurements are accurate to that precision.
- Expecting a fixed vehicle value: Fuel use varies with conditions, so one calculation does not establish a guaranteed rate for every trip.
The formula is a straightforward ratio, but it cannot correct inaccurate records or account for changes in fuel volume due to temperature. It also does not diagnose a vehicle or identify why consumption changed. For a fair comparison, gather consistent observations over a meaningful distance and consider the driving conditions alongside the number.
Frequently Asked Questions
How do I calculate litres per 100 km?
Divide litres used by kilometres travelled, then multiply by 100. For example, 30 L over 500 km gives (30 ÷ 500) × 100 = 6 L/100 km.
Is a lower L/100 km better?
For fuel consumption, yes: a lower L/100 km value means fewer litres are used to travel 100 km. The equivalent km/L measure works in the opposite direction, with higher generally indicating greater distance per litre.
How many litres do I need for a trip?
Multiply the expected distance in kilometres by the consumption rate in L/100 km, then divide by 100. At 7.5 L/100 km, an estimated 400 km trip uses 7.5 × 400 ÷ 100 = 30 L, before allowing for changing conditions.
How do I convert L/100 km to km/L?
Divide 100 by the L/100 km figure. For example, 5 L/100 km equals 20 km/L. The reverse conversion is also 100 divided by the km/L value.
Why is my real fuel consumption different from the displayed figure?
Trip length, traffic, speed, terrain, temperature, load, and how fuel and distance were measured can all affect the result. A vehicle display may also use its own averaging interval, so compare figures over equivalent periods.
Related
Formula used
in f | Fuel used | L | 8 | 0 in d | Distance travelled | km | 100 | 0 out c | Fuel consumption | L/100 km | f * 100 / d | 2 out e | Distance per litre | km/L | d / f | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s