molecalculator

Moles & Molar Mass

Magnesium Nitrate Melting Point: Facts & Data

Calculator No. 01-12535 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Magnesium nitrate (Mg(NO3)2) melts at 129 °C (264 °F) in its anhydrous form. The common hexahydrate form, Mg(NO3)2·6H2O, melts at about 89 °C (192 °F). This article explains why the melting point differs between forms, how it’s measured, and what it means for practical use.

Formula

The calculator above computes the molarity of a solution from the mass of solute, its molar mass, and the final solution volume. The formula is:

c = m / (mm × V)

  • c = molarity (mol/L)
  • m = mass of solute (g)
  • mm = molar mass of solute (g/mol)
  • V = final solution volume (L), converting from mL by dividing by 1000

This is the standard definition of molarity: moles of solute per liter of solution.

Worked Example

Using the default values from the calculator (mass = 2.922 g, molar mass = 58.44 g/mol, volume = 250 mL):

  1. Convert volume: 250 mL = 250 / 1000 = 0.250 L
  2. Calculate moles of solute: 2.922 g / 58.44 g/mol = 0.05000 mol
  3. Calculate molarity: 0.05000 mol / 0.250 L = 0.2000 mol/L

The calculator shows 0.2000 mol/L (or 200.0 mM). This matches the default calculation.

Assumptions

  • The solution is prepared by dissolving the solute in enough solvent to reach the final volume (not by adding solute to a fixed solvent volume).
  • The solute is pure and completely dissolves; no volume change from mixing is considered.
  • Temperature is assumed to be 25 °C unless otherwise stated; molarity changes slightly with temperature because volume expands.

Why Two Melting Points?

Magnesium nitrate exists in several hydrated forms. The anhydrous salt (no water of crystallization) has a higher melting point (129 °C) because its crystal lattice is held together by strong ionic bonds between Mg2+ and NO3− ions. The hexahydrate (six water molecules per formula unit) has water molecules incorporated into the crystal structure, which disrupts the ionic lattice and lowers the melting point to about 89 °C. In practice, the hexahydrate is the most common commercial form because it is stable and easy to handle.

How the Melting Point Is Measured

Melting points are typically determined using a capillary tube method: a small amount of the solid is placed in a thin glass tube and heated slowly in an oil bath or a digital melting point apparatus. The temperature at which the last crystal disappears is recorded as the melting point. For hydrates, heating can cause partial dehydration before melting, so the observed melting point may vary depending on heating rate. A slow heating rate (1–2 °C per minute) gives more reproducible results.

Common Problems in Melting Point Determination

  • Impurities: Even small amounts of impurities lower the melting point and broaden the melting range. Pure magnesium nitrate melts sharply within 1–2 °C.
  • Dehydration: If the hexahydrate is heated too quickly, it may lose water and appear to melt at a higher temperature, or it may melt in its own water of crystallization (a process called incongruent melting).
  • Thermal decomposition: At temperatures above 300 °C, magnesium nitrate decomposes to magnesium oxide, nitrogen oxides, and oxygen. This is not a melting point but a decomposition point.

Practical Applications and Relevance

The melting point matters in several applications:

  • Fertilizers: Magnesium nitrate is a source of both magnesium and nitrogen for plants. Knowing its melting point helps in formulating granular fertilizers that don’t melt or cake during storage.
  • Ceramics and catalysts: It is used as a precursor for magnesium oxide. The decomposition temperature (not the melting point) is more relevant here.
  • Laboratory drying agent: Anhydrous magnesium nitrate is used to dry organic solvents. Its melting point is a quick check of purity.
  • Pyrotechnics: It acts as an oxidizer; the melting point affects how it mixes with fuels.

Comparison with Other Nitrates

Melting points of metal nitrates vary widely:

  • Sodium nitrate (NaNO3): 308 °C
  • Potassium nitrate (KNO3): 334 °C
  • Calcium nitrate (Ca(NO3)2): 561 °C (anhydrous)
  • Magnesium nitrate (Mg(NO3)2): 129 °C

The relatively low melting point of magnesium nitrate is due to the small, highly polarizing Mg2+ ion, which weakens the nitrate-nitrate interactions in the crystal. This low melting point makes it useful as a low-temperature heat transfer medium in some industrial processes.

Safety and Handling

Magnesium nitrate is a strong oxidizer. It can accelerate the combustion of combustible materials and may cause fires if mixed with organic compounds. When handling it:

  • Wear gloves and safety goggles; it can irritate skin and eyes.
  • Store in a cool, dry place away from reducing agents and organic materials.
  • Do not heat above 300 °C; decomposition releases toxic nitrogen oxides.
  • In case of skin contact, wash with soap and water. If ingested, seek medical help.

Follow your lab method, the safety data sheet (SDS), and your supervisor.

Frequently Asked Questions

Does magnesium nitrate melt or decompose first?

Anhydrous magnesium nitrate melts at 129 °C without decomposing. However, if heated further, it decomposes around 300 °C. The hexahydrate may lose water before fully melting, so you might see a slushy transition rather than a sharp melting point.

Why does my sample melt at a lower temperature than 129 °C?

If you have the hexahydrate, it melts at about 89 °C. If you have the anhydrous form but it melts lower, it may have absorbed moisture from the air, forming hydrates. Impurities also lower the melting point.

What is the melting point of magnesium nitrate in Fahrenheit?

Anhydrous: 129 °C = 264 °F. Hexahydrate: 89 °C = 192 °F. Use the conversion: °F = (°C × 9/5) + 32.

Can I use the melting point to identify magnesium nitrate?

Melting point alone is not definitive because other salts may have similar values. Combine it with other tests like solubility, flame test (magnesium gives a bright white flame), or X-ray diffraction for positive identification.

Does the melting point change with pressure?

Yes, but the effect is small for solids. Increasing pressure generally raises the melting point of most substances, but for magnesium nitrate the change is only a few degrees per atmosphere. In normal laboratory conditions, the difference is negligible.

Is anhydrous magnesium nitrate safe to handle without special training?

It is an oxidizer, so it requires standard lab safety precautions. You should wear gloves and goggles, avoid contact with organic materials, and follow your institution’s safety protocols. It is not explosive by itself, but it can make fires burn more intensely.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →