molecalculator

Moles & Molar Mass

Molar Mass of Glucose C6H12O6: Exact Value & How to Find It

Calculator No. 01-9882 · Updated · Formula and assumptions shown below

Molarity 0.0649 mol/L
Concentration in millimolar
64.88 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
180.156 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar mass of glucose (C6H12O6) is 180.156 g/mol. This is the mass of one mole of glucose molecules, calculated by summing the atomic weights of 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms. The value is essential for converting between grams and moles in chemistry, biology, and medicine.

Formula

The molar mass (M) of a compound is the sum of the atomic masses of all atoms in its molecular formula. For glucose, C6H12O6:

M = (6 × AC) + (12 × AH) + (6 × AO)

where:

  • AC = atomic mass of carbon = 12.011 g/mol
  • AH = atomic mass of hydrogen = 1.008 g/mol
  • AO = atomic mass of oxygen = 15.999 g/mol

Plugging in the values: (6 × 12.011) + (12 × 1.008) + (6 × 15.999) = 72.066 + 12.096 + 95.994 = 180.156 g/mol.

Worked Example

Suppose you need to prepare 250 mL of a glucose solution with a concentration of 0.065 mol/L (65 mM). How many grams of glucose do you weigh out?

Use the formula: mass (g) = molarity (mol/L) × molar mass (g/mol) × volume (L).

Step 1: Convert volume to liters: 250 mL = 250 / 1000 = 0.250 L.

Step 2: Multiply: 0.065 mol/L × 180.156 g/mol × 0.250 L = 2.9275 g.

Rounding to three significant figures gives 2.928 g. This matches the calculator default (2.922 g) when you enter 0.065 M and 250 mL (calculator uses 180.156 exactly, so 2.9275).

Assumptions

  • The atomic weights are the IUPAC abridged standard values (C = 12.011, H = 1.008, O = 15.999).
  • The compound is pure anhydrous glucose (no water of hydration).
  • The solution is prepared by dissolving the solid in enough solvent to make the final volume, not by adding solvent to a fixed mass.
  • Temperature and pressure do not affect molar mass (they affect volume, but the calculation uses mass and molarity directly).

Why the Molar Mass of Glucose Matters

Glucose is a monosaccharide with the formula C6H12O6. It is the primary energy source for most living cells and the building block of cellulose and starch. In the lab, you need its molar mass to:

  • Prepare cell culture media (e.g., DMEM contains 4.5 g/L glucose, which is 25 mM).
  • Calculate osmolality (1 mole of glucose in 1 kg water ≈ 1 Osmol/kg).
  • Convert blood glucose readings from mg/dL to mmol/L (divide by 18.016).
  • Determine the number of molecules in a sample using Avogadro’s number.

How to Calculate Molar Mass of Any Compound

Follow these steps:

  1. Write the molecular formula (e.g., C6H12O6).
  2. Find the atomic mass of each element from the periodic table (use the standard atomic weight).
  3. Multiply each atomic mass by the number of atoms of that element in the formula.
  4. Sum all the products.

For glucose, the breakdown is: 6 C (72.066) + 12 H (12.096) + 6 O (95.994) = 180.156 g/mol.

Common Mistakes and Misconceptions

  • Using the wrong atomic weight: Some tables give 12.01, 1.008, and 16.00. That gives 180.16 g/mol, which is fine for most purposes, but the exact IUPAC values yield 180.156.
  • Forgetting the subscript: C6H12O6 has 6 oxygens, not 1. A common error is using 6 × 16 = 96, but forgetting to multiply carbon and hydrogen correctly.
  • Confusing molar mass with molecular weight: They are numerically identical (e.g., 180.156 g/mol vs. 180.156 Da), but molar mass has units of g/mol.
  • Rounding too early: If you round each atomic mass to 12, 1, and 16, you get 180 g/mol, but the more precise value is 180.156 g/mol. In precise work, use the full values.

Molar Mass vs. Molecular Weight vs. Formula Weight

These terms are often used interchangeably, but there are subtle differences:

  • Molar mass (M) is the mass of one mole of a substance in grams per mole (g/mol). It applies to atoms, molecules, ions, or formula units.
  • Molecular weight (MW) is the mass of one molecule relative to 1/12 of carbon-12. It is dimensionless, but often expressed in daltons (Da). Numerically, MW in Da equals molar mass in g/mol.
  • Formula weight (FW) is used for ionic compounds (e.g., NaCl), but for glucose it is the same as molar mass.

For glucose, all three are 180.156 (with appropriate units).

Using Molar Mass in Concentration Calculations

The most common lab use is preparing solutions. The relationship is:

Molarity (mol/L) = mass (g) / (molar mass (g/mol) × volume (L))

For example, to make 500 mL of a 1 M glucose solution:

  1. Convert volume to liters: 500 mL = 0.5 L.
  2. Calculate mass: 1 mol/L × 180.156 g/mol × 0.5 L = 90.078 g.
  3. Weigh 90.078 g of glucose, dissolve in water, and bring the total volume to 500 mL.

If you need a 5% (w/v) solution, that is 5 g per 100 mL, which is 50 g/L. The molarity is 50 g/L ÷ 180.156 g/mol = 0.2775 M (277.5 mM).

Frequently Asked Questions

What is the molar mass of glucose in mg/mmol?

1 mmol of glucose has a mass of 180.156 mg. Since 1 mol = 1000 mmol, divide the molar mass by 1000: 180.156 g/mol ÷ 1000 = 0.180156 g/mmol = 180.156 mg/mmol. This is useful for small-scale reactions.

How do I convert blood glucose from mg/dL to mmol/L?

Divide the value in mg/dL by 18.016 (which is 180.156 ÷ 10). For example, 90 mg/dL ÷ 18.016 = 4.99 mmol/L, often rounded to 5.0 mmol/L. The factor 18 comes from the molar mass divided by 10 (because 1 dL = 0.1 L).

Is glucose molar mass the same as dextrose?

Yes. Dextrose is the common name for D-glucose, the naturally occurring form. The chemical formula is the same (C6H12O6), so the molar mass is identical: 180.156 g/mol.

Why is the molar mass of glucose not a whole number?

Because atomic masses are weighted averages of naturally occurring isotopes. Carbon-12 is exactly 12, but carbon-13 and carbon-14 exist in small amounts, raising the average to 12.011. Similarly, hydrogen and oxygen have isotopes. The sum is therefore not an integer.

How many glucose molecules are in 1 gram?

Divide 1 g by the molar mass to get moles: 1 g ÷ 180.156 g/mol = 0.005551 mol. Multiply by Avogadro’s number (6.022 × 1023 molecules/mol) to get 3.34 × 1021 molecules.

What is the molar mass of glucose monohydrate?

Glucose monohydrate (C6H12O6·H2O) includes one water molecule per glucose. Its molar mass is 180.156 + 18.015 = 198.171 g/mol. Be sure to check which form you have, because using the anhydrous value for the monohydrate will cause a ~10% error.

Safety and Practical Notes

Glucose is generally safe to handle, but always follow your lab’s safety data sheet (SDS) and supervisor. Avoid inhaling dust, and wash hands after handling. When preparing solutions, use a volumetric flask to ensure the final volume is accurate—add the solid, dissolve in about 80% of the final volume, then bring to the mark. The calculator above assumes the final volume, not the solvent volume.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 180.156 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →