molecalculator

Moles & Molar Mass

Sodium Bicarbonate NaHCO₃ Molar Mass and Calculation

Calculator No. 01-5945 · Updated · Formula and assumptions shown below

Molar mass of NaHCO3 84.0060 g/mol
Amount from sample mass
1.0000 mol
= Sample mass ÷ Molar mass of NaHCO3
Mass for entered amount
84.0060 g
= Amount of NaHCO3 × Molar mass of NaHCO3
Sample mass
84.0066 g
Set in the form below
You enter
Sample mass (g), Amount of NaHCO3 (mol)
You get
Molar mass of NaHCO3 (g/mol), Amount from sample mass (mol), Mass for entered amount (g)
Rounding
4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar mass of sodium bicarbonate, NaHCO₃, is 84.0066 g/mol using standard atomic weights; to four significant figures, that is 84.01 g/mol. Enter a sample mass in grams to calculate its amount in moles, or enter moles to calculate the corresponding mass.

Formula

Molar mass is the sum of the atomic masses of every atom represented in the chemical formula. For sodium bicarbonate:

M(NaHCO₃) = Aᵣ(Na) + Aᵣ(H) + Aᵣ(C) + 3 × Aᵣ(O)

  • M is molar mass in grams per mole (g/mol).
  • Aᵣ(Na), Aᵣ(H), Aᵣ(C), and Aᵣ(O) are the standard atomic weights used here: 22.990, 1.008, 12.011, and 15.999, respectively.
  • The subscript 3 means that one formula unit contains three oxygen atoms.

For a sample, the amount in moles is n = m / M, where n is amount in moles (mol), m is mass in grams (g), and M is molar mass (g/mol). Rearranging gives m = n × M when you know the amount and want the mass.

Worked Example

Using the calculator’s default inputs—84.0066 g of sample and 1 mol for the mass conversion—the atomic-weight calculation is:

M = 22.990 + 1.008 + 12.011 + 3 × 15.999 = 84.006 g/mol, or 84.01 g/mol to four significant figures.

Using the unrounded sum, the amount represented by the default sample mass is 84.0066 g ÷ 84.006 g/mol = 1.000007 mol, which displays as 1.000 mol to four decimal places.

For the separate default amount of 1 mol, the corresponding mass is 1 mol × 84.006 g/mol = 84.006 g, displayed as 84.01 g to four significant figures. The calculator rounds the molar-mass output for display; its other calculations use the full expression.

Assumptions

  • The sample is treated as pure, anhydrous sodium bicarbonate, with formula NaHCO₃.
  • The calculation uses the listed abridged standard atomic weights and assumes ordinary isotopic composition.
  • This is a formula-mass calculation; it does not measure purity, moisture, or the actual composition of a sample.

What the Formula and Name Mean

Sodium bicarbonate is an ionic compound commonly called baking soda. Its formula, NaHCO₃, shows the proportions of its constituent atoms: one sodium (Na), one hydrogen (H), one carbon (C), and three oxygen (O) atoms per formula unit. In a solid, it is more precise to talk about formula units rather than separate molecules, but the same atomic-weight sum gives its molar mass.

A mole is a counting unit equal to exactly 6.02214076 × 1023 specified entities. Thus, one mole of NaHCO₃ formula units has a mass of about 84.006 g. The molar mass connects a microscopic formula to a measurable laboratory mass; it is not the mass of a single formula unit.

The displayed result may differ slightly between references because some round atomic weights earlier or use a different number of significant figures. With the atomic weights stated above, the sum is 84.006 g/mol. Writing 84.01 g/mol is a reasonable rounded value for most calculations, but retaining extra digits can help avoid rounding too soon in multistep work.

Using Molar Mass in Calculations

To convert a weighed sample to moles, divide its mass by 84.006 g/mol. For example, a 10.0 g pure sample corresponds to 10.0 g ÷ 84.006 g/mol = about 0.119 mol. Conversely, 0.250 mol corresponds to 0.250 mol × 84.006 g/mol = about 21.0 g.

These conversions are useful in stoichiometry, where balanced-reaction coefficients compare amounts in moles, and when preparing a solution with a specified amount of solute. If a calculation needs a number of formula units rather than moles, multiply moles by Avogadro’s constant, 6.02214076 × 1023 entities/mol. The result is a count of formula units, not a mass.

For solution calculations, keep the distinction between amount and concentration clear. Molarity is amount of solute divided by the final solution volume in liters; molar mass alone does not provide a solution concentration. A weighed mass also does not establish how much pure NaHCO₃ is present if the material contains water or other substances.

Common Mistakes and Limits

  • Forgetting an oxygen atom: There are three oxygen atoms, so the oxygen contribution is 3 × 15.999, not just 15.999.
  • Confusing molar mass with molecular mass: Molar mass is expressed in g/mol. The mass of one formula unit is vastly smaller and is not 84 grams.
  • Mixing up grams and moles: Divide grams by g/mol to get moles; multiply moles by g/mol to get grams.
  • Using a rounded value too early: Use 84.006 g/mol or retain the calculator’s full expression during intermediate steps, then round the final result to match the input precision.
  • Assuming every sample is pure: The formula gives the theoretical molar mass of NaHCO₃, not the purity or moisture content of a particular powder.

For a mixture or an impure sample, the calculator cannot determine the true amount of sodium bicarbonate from total mass alone. That requires composition or purity information from an appropriate source. Likewise, temperature and pressure do not change the formula’s molar mass, though they can affect the volume or behavior of a gas or solution involved in a broader calculation.

Frequently Asked Questions

What is the molar mass of NaHCO₃?
Using Na = 22.990, H = 1.008, C = 12.011, and O = 15.999, the molar mass is 84.006 g/mol, usually written as 84.01 g/mol.

How many moles are in 1 gram of sodium bicarbonate?
Divide 1 g by 84.006 g/mol. The result is approximately 0.01190 mol, assuming the gram is pure, anhydrous NaHCO₃.

How many grams are in one mole of baking soda?
One mole of sodium bicarbonate has a mass of about 84.006 g, or 84.01 g when rounded to four significant figures.

Why do some sources list a slightly different value?
Sources may round atomic weights differently or show fewer digits. Small differences such as 84.01 versus 84.006 g/mol are generally rounding differences, not different formulas.

Does NaHCO₃ have a molecular mass or a formula mass?
Sodium bicarbonate is an ionic solid, so formula mass is the more precise term for one NaHCO₃ unit. Molar mass describes one mole of those formula units and is reported in g/mol.

Related

Formula used
in m | Sample mass | g | 84.0066 | 0
in n | Amount of NaHCO3 | mol | 1 | 0
out mm | Molar mass of NaHCO3 | g/mol | 22.990 + 1.008 + 12.011 + 3 * 15.999 | 4
out mol | Amount from sample mass | mol | m / mm | 4
out mass | Mass for entered amount | g | n * mm | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →