molecalculator

Moles & Molar Mass

Molarity: Moles per Liter Explained and Calculated

Calculator No. 01-5970 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Yes. Molarity is the amount of dissolved solute, in moles, divided by the total final solution volume, in liters; its unit is mol/L, also written M. Enter the solute mass, its molar mass, and the final solution volume below to calculate molarity and millimolar concentration.

Formula

Molarity is moles of solute divided by liters of final solution:

C = n / V = (m / Mm) / (VmL / 1000)

  • C is molarity, in mol/L (M).
  • n is the amount of solute, in moles.
  • m is solute mass, in grams.
  • Mm is molar mass, in g/mol.
  • V is final solution volume, in liters; VmL is that volume in milliliters. The conversion is 1000 mL = 1 L, so divide milliliters by 1000.

The calculator combines the two steps n = m / Mm and C = n / V. Millimolar concentration is C multiplied by 1000 because 1 mol/L = 1000 mmol/L, or 1000 mM.

Worked Example

Using the calculator’s default values—2.922 g of solute, a molar mass of 58.44 g/mol, and 250 mL final solution volume—first find the amount in moles:

n = 2.922 g / (58.44 g/mol) = 0.050000 mol

Convert the final volume to liters:

V = 250 mL / 1000 = 0.250 L

Then divide moles by liters:

C = 0.050000 mol / 0.250 L = 0.2000 mol/L

The millimolar result is 0.2000 mol/L × 1000 = 200.00 mM. The calculator displays molarity to four decimal places and millimolar concentration to two.

Assumptions

  • The entered mass is the mass of the solute, and its molar mass matches the chemical form used.
  • The volume is the final volume of the solution, not the volume of solvent added.
  • Mass and volume measurements are accurate enough for the displayed rounding; the calculator does not estimate measurement uncertainty.

What Molarity Means

Molarity expresses how much substance is present in a given volume of solution. A 1 M solution contains one mole of solute per liter of final solution; a 0.20 M solution contains 0.20 moles per liter. The symbol M is shorthand for mol/L, not a separate unit of mass.

A mole is a counting unit for particles such as molecules, formula units, or atoms. One mole contains exactly 6.02214076 × 1023 specified entities. Molarity therefore connects a measurable solution volume to a particle amount, which is why it is widely used in reaction calculations and laboratory solution arithmetic.

For an ionic compound, “moles of solute” means moles of the compound formula units weighed out. It does not automatically mean moles of each ion after dissolution. For example, dissociation may produce more than one ion per formula unit, but that does not change the compound’s molarity as originally defined.

When to Use Molarity

Use molarity when a calculation or protocol expresses solution concentration in moles per liter—for example, when relating a known solution volume to the amount of a reactant. It is especially convenient for stoichiometry because balanced chemical equations compare substances in mole ratios.

This calculator works backward from mass, molar mass, and final volume. If the amount is already known in moles, use C = n / V directly. If concentration and volume are known, rearrange to n = C × V, with volume in liters. If you need mass, then m = C × V × Mm.

  • For 0.50 mol in 2.0 L: C = 0.50 / 2.0 = 0.25 mol/L.
  • For a 0.10 mol/L solution with a final volume of 0.250 L: n = 0.10 × 0.250 = 0.025 mol.
  • To convert mol/L to mM, multiply by 1000; to convert mM to mol/L, divide by 1000.

Common Mistakes and Limits

The most important distinction is between final solution volume and solvent volume. A solution made up to 250 mL has a total volume of 250 mL; that does not necessarily mean 250 mL of solvent was added. Dissolving a substance can change the volume, so using the solvent volume in the denominator can give the wrong concentration.

Check units before calculating. The formula here expects mass in grams, molar mass in g/mol, and volume in milliliters. If volume is entered in liters, do not also divide it by 1000. Likewise, the molar mass must refer to the exact substance weighed, including its specified chemical form; hydrated salts and anhydrous salts have different molar masses.

Do not round intermediate values too early. Keep useful digits through the calculation, then round the final result to match the precision of the input measurements. A calculator’s displayed decimal places are formatting, not a claim that the original measurements are exact to that many significant figures.

Molarity is based on solution volume and can change with temperature because liquids expand or contract. For ordinary classroom calculations this effect is often ignored unless the problem specifies a temperature. More fundamentally, this arithmetic does not account for purity, incomplete dissolution, chemical reaction, or measurement error. For bench work, follow your lab method, the safety data sheet (SDS), and your supervisor.

Molarity Compared with Other Concentrations

Molarity is not the only way to describe concentration. Mass concentration, such as g/L, reports solute mass per solution volume and does not require converting through molar mass. Molality, written mol/kg, uses kilograms of solvent rather than liters of solution; it is less directly affected by temperature-driven volume changes. Mass percent reports solute mass relative to total solution mass.

These units answer different questions, so convert only when the necessary information is available. To convert g/L to mol/L, divide by the compound’s molar mass in g/mol. Converting between molarity and molality generally also requires density and composition information; the two are not interchangeable by a simple fixed factor.

Frequently Asked Questions

Is molarity the same as moles per liter?
Yes. Molarity is defined as moles of solute per liter of final solution, with units mol/L or M.

How do I calculate molarity from grams?
Divide the mass in grams by molar mass in g/mol to get moles, convert the final volume to liters, then divide moles by liters.

Does molarity use the volume of solvent or solution?
It uses the total final volume of the solution. The volume of solvent initially measured may not equal the final solution volume.

How many millimolar are in one molar?
One molar equals 1000 millimolar: 1 mol/L = 1000 mM.

Can molarity change with temperature?
Yes. Since molarity is per liter of solution, a temperature-related change in solution volume can change its molarity, even if the amount of solute stays constant.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →