molecalculator

Moles & Molar Mass

Molecular Weight Calculator for Chemicals

Calculator No. 01-4603 · Updated · Formula and assumptions shown below

Molecular weight (molar mass) 30.026 g/mol
Hydrogen atoms
2
Set in the form below
Carbon atoms
1
Set in the form below
Nitrogen atoms
0
Set in the form below
Oxygen atoms
1
Set in the form below
You enter
Hydrogen atoms, Carbon atoms, Nitrogen atoms, Oxygen atoms, Sodium atoms, Chlorine atoms
You get
Molecular weight (molar mass) (g/mol)
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A chemical molecular-weight (MW) calculator adds the atomic masses in a chemical formula to report the compound’s molar mass in grams per mole (g/mol). Enter the formula’s element counts, and it returns the total; the value can then be used in general chemistry calculations that convert between mass and amount of substance.

Formula

The calculator uses the sum of each element’s atom count multiplied by its standard atomic weight:

MW (g/mol) = 1.008H + 12.011C + 14.007N + 15.999O + 22.990Na + 35.45Cl

Here, H, C, N, O, Na and Cl are the numbers of hydrogen, carbon, nitrogen, oxygen, sodium and chlorine atoms in one formula unit. The coefficients are IUPAC abridged standard atomic weights in g/mol. The calculator is a simple composition calculator for formulas containing these six elements; it does not identify a chemical from a name or validate whether a formula represents a real, stable substance.

Worked Example

The default inputs are H = 2, C = 1, N = 0, O = 1, Na = 0 and Cl = 0, corresponding to H₂CO, a formula with two hydrogen atoms, one carbon atom and one oxygen atom.

MW = 2 × 1.008 + 1 × 12.011 + 0 × 14.007 + 1 × 15.999 + 0 × 22.990 + 0 × 35.45

MW = 2.016 + 12.011 + 15.999 = 30.026 g/mol

Assumptions

  • The entered counts describe one neutral formula unit and are nonnegative whole numbers.
  • Atomic weights are conventional average values; isotopically enriched material may have a different mass.
  • The result is molar mass in g/mol, not the mass of a particular molecule in grams or its exact mass in daltons.
  • The calculator includes only H, C, N, O, Na and Cl. Add the mass of any omitted elements separately or use a calculator that supports the full formula.

How Molecular Weight Is Calculated

“Molecular weight” is widely used in chemistry, although relative molecular mass is technically a dimensionless ratio and molar mass is the mass per mole, expressed in g/mol. In routine lab calculations, people often use “molecular weight” to mean the numerical molar mass. For example, a compound with a molar mass of 30.026 g/mol has a mass of about 30.026 g per mole of its formula units.

Atomic weights account for the naturally occurring isotopes of an element. A formula’s subscripts say how many atoms to count: in CO₂, count one carbon and two oxygen atoms, not one oxygen. Parentheses multiply every atom inside them. Thus Ca(OH)₂ contains one calcium, two oxygen and two hydrogen atoms. To calculate that compound, a user needs a tool that supports calcium as well as the elements in this page’s calculator.

Ionic substances such as sodium chloride are not made of separate, discrete molecules in the same way as many covalent compounds. Their formula gives the simplest ratio of ions, so “formula-unit molar mass” is more precise. The arithmetic is still the same: add the atomic masses in the formula unit. This page supports sodium and chlorine but not other elements, so enter Na = 1 and Cl = 1 to get 58.440 g/mol for NaCl.

When to Use the Result

Molar mass links the measurable mass of a sample to the amount of substance in moles. For a pure compound, use n = m / M, where n is amount in mol, m is sample mass in g, and M is molar mass in g/mol. Conversely, m = n × M. If a compound has a molar mass of 58.440 g/mol, 0.100 mol has a calculated mass of 5.8440 g, assuming the material is pure and the stated formula is correct.

For a solution concentration expressed in mol/L, the required solute amount is n = c × V, with volume V in litres. Convert millilitres to litres by dividing by 1,000 before using the equation. Molar mass does not tell you the volume a solid will occupy, how much solvent to add, or the final solution volume. In solution preparation, final volume means the total volume of the finished solution, not the volume of solvent poured in.

For a mixture, hydrate, salt, or material with variable composition, first determine which chemical form the label and calculation require. Water of crystallization counts when it appears in the formula—for example, a hydrate’s formula includes water molecules—while a different salt form has a different molar mass from the free acid or base.

Common Input and Interpretation Problems

  • Missing a subscript: H₂O has two hydrogen atoms. Entering H = 1 gives the wrong result.
  • Misreading parentheses: In a formula such as Mg(OH)₂, the 2 applies to both O and H.
  • Confusing mass and amount: A result in g/mol is not a sample mass in grams. You need the sample’s mass or mole quantity for a conversion.
  • Ignoring chemical form: An anhydrous compound, hydrate, free acid and sodium salt can have different formulas and therefore different molar masses.
  • Rounding too early: Keep the displayed precision during intermediate calculations, then round the final value to match the accuracy needed. The atomic weights themselves are conventional values, not a claim that a real sample’s mass is exact to every displayed digit.
  • Entering fractional atom counts: A single molecular formula has whole-number subscripts. Fractional empirical formulas may describe a bulk ratio, but are not a single molecule’s formula.

An exact molecular mass can differ from the molar mass calculated using average atomic weights because a particular molecule contains particular isotopes. The distinction matters in high-resolution mass spectrometry and isotope-labeling work; ordinary stoichiometry generally uses the average molar mass.

Limits and Safety

This calculator is deliberately limited to six elements and counts. It does not parse typed chemical notation, check charge balance, identify the substance, account for purity, or determine a compound’s physical properties. For formulas containing sulfur, phosphorus, calcium, potassium or any other unsupported element, include every atom with its correct standard atomic weight using a more complete method. For isotopically specified formulas, use the relevant isotope masses rather than average atomic weights.

The arithmetic is suitable for study and general lab planning, not a substitute for checking a reagent label, certificate, validated method or chemical reference. When bench work is involved, follow your lab method, the safety data sheet (SDS) and your supervisor. A correct molar mass alone does not establish that a substance or procedure is safe.

Frequently Asked Questions

What does MW mean in chemistry?
MW usually means molecular weight. In everyday chemistry use, it often refers to molar mass, the mass of one mole of a compound in g/mol. Strictly, relative molecular mass is dimensionless.

How do I calculate the MW of a chemical?
Write its correct chemical formula, count each element’s atoms, multiply each count by that element’s atomic weight, and add the products. Check subscripts, parentheses, and whether the chemical is a hydrate or a particular salt form.

Is molecular weight the same as molar mass?
They are often used interchangeably in practical calculations, but the units differ conceptually. Molar mass has units such as g/mol; relative molecular mass is a dimensionless ratio. Their numerical values are commonly similar when molar mass is expressed in g/mol.

Can I calculate a formula with elements not shown?
Not with this calculator’s six inputs. For an element not listed, use its appropriate standard atomic weight and add its count-times-weight contribution separately, or use a calculator that includes that element.

Why can a chemical’s listed MW differ slightly?
Sources may round atomic weights differently, use a different isotope composition, or refer to a different chemical form, such as an anhydrous compound versus a hydrate. Confirm that the formula and convention match the material you have.

Related

Formula used
in h | Hydrogen atoms | - | 2 | 0
in c | Carbon atoms | - | 1 | 0
in n | Nitrogen atoms | - | 0 | 0
in o | Oxygen atoms | - | 1 | 0
in na | Sodium atoms | - | 0 | 0
in cl | Chlorine atoms | - | 0 | 0
out mw | Molecular weight (molar mass) | g/mol | h * 1.008 + c * 12.011 + n * 14.007 + o * 15.999 + na * 22.990 + cl * 35.45 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →