molecalculator

Moles & Molar Mass

Nucleus, Electron, Proton, Neutron: What They Are

Calculator No. 01-7900 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

An atom is made of a central nucleus containing protons and neutrons, surrounded by a cloud of electrons. Protons are positively charged, electrons are negatively charged, and neutrons have no charge; the number of protons determines which element the atom is.

Formula

The calculator above works out the molarity (concentration) of a solution from the mass of solute, its molar mass, and the final volume of the solution. The formula is:

c = m / (M × V)

where:

  • c = molarity in mol/L (moles per liter)
  • m = mass of solute in grams (g)
  • M = molar mass of the solute in g/mol
  • V = final solution volume in liters (L)

Note that the volume is converted from mL to L by dividing by 1000. The result is the number of moles of solute per liter of final solution, which is the standard unit of concentration in chemistry.

Worked Example

Using the default values from the calculator: you dissolve 2.922 g of sodium chloride (NaCl, molar mass 58.44 g/mol) in enough water to make 250 mL of solution. What is the molarity?

First, convert the volume from mL to L:

V = 250 mL ÷ 1000 = 0.250 L

Now plug into the formula:

c = 2.922 g / (58.44 g/mol × 0.250 L)

c = 2.922 / 14.61 = 0.2000 mol/L

So the molarity is 0.2000 mol/L (or 200.0 mM). The calculator gives the same result: 0.2000 mol/L and 200.0 mM.

Assumptions

  • The solute is pure and fully dissolves without reaction.
  • The volume used is the final volume of the solution, not the volume of solvent added.
  • Temperature and pressure do not affect molarity (they affect volume slightly, but this is ignored for routine lab work).
  • The molar mass is taken from the periodic table (IUPAC standard atomic weights).

What Are Protons, Neutrons, and Electrons?

Atoms are the basic building blocks of matter. Each atom has a tiny, dense nucleus at its center, which contains protons and neutrons. Electrons orbit the nucleus in regions called orbitals, but they are not like planets in neat orbits—they form a cloud of probability.

Key properties:

  • Proton: positive charge (+1), mass ≈ 1.6726 × 10-27 kg (about 1 atomic mass unit, u).
  • Neutron: no charge (0), mass ≈ 1.6749 × 10-27 kg (slightly heavier than a proton).
  • Electron: negative charge (−1), mass ≈ 9.109 × 10-31 kg (about 1/1836 of a proton).

The number of protons is the atomic number (Z). It defines the element. For example, carbon always has 6 protons; if it had 7, it would be nitrogen.

How the Nucleus Holds Together

Protons repel each other because they all have positive charge. So why doesn’t the nucleus fly apart? The answer is the strong nuclear force, one of the four fundamental forces of nature. This force acts between protons and neutrons at very short distances (about 10-15 m) and is much stronger than the electromagnetic repulsion at that scale.

Neutrons add to the strong force without adding electrical repulsion. That’s why heavier elements need more neutrons to be stable. For example, helium-4 has 2 protons and 2 neutrons, and it is extremely stable. Uranium-238 has 92 protons and 146 neutrons, but even with all those neutrons, it is still radioactive because the repulsion between protons is so large.

If a nucleus has too many or too few neutrons, it becomes unstable and undergoes radioactive decay, emitting particles or energy to reach a more stable configuration.

Isotopes and Atomic Mass

All atoms of an element have the same number of protons, but they can have different numbers of neutrons. These variants are called isotopes. For example, carbon-12 (6 protons + 6 neutrons) and carbon-14 (6 protons + 8 neutrons) are both carbon, but carbon-14 is radioactive and used in dating ancient artifacts.

The atomic mass you see on the periodic table is a weighted average of all naturally occurring isotopes. For carbon, it’s 12.011 u, because carbon-12 is the most common, with small amounts of carbon-13 and carbon-14.

Isotopes are written with the mass number (protons + neutrons) as a superscript, like 14C or 235U.

Electron Shells and Chemical Behavior

Electrons occupy energy levels (shells) around the nucleus. The outermost electrons, called valence electrons, determine how an atom bonds with others. Atoms tend to gain, lose, or share electrons to fill their outermost shell (usually 8 electrons, the octet rule).

For example, sodium (Na) has 1 valence electron and easily loses it to become Na+, while chlorine (Cl) has 7 valence electrons and gains one to become Cl–. Together they form NaCl (table salt). This is why the periodic table is arranged in columns—elements in the same column have similar valence electron configurations and thus similar chemical properties.

Common Misconceptions

  • “Electrons orbit the nucleus like planets.” In reality, electrons exist in probability clouds (orbitals). You cannot pinpoint an electron’s exact position at a given time.
  • “The nucleus is mostly empty space.” Actually, the nucleus is extremely dense—if an atom were the size of a football stadium, the nucleus would be about the size of a pea in the center.
  • “Protons and neutrons are elementary particles.” They are not. They are made of smaller particles called quarks (up and down quarks). Electrons, however, are elementary (they are not made of anything smaller).
  • “Mass number equals atomic mass.” The mass number is the total number of protons and neutrons in a specific isotope; atomic mass is the weighted average of all isotopes.

Why This Matters in Chemistry

Understanding protons, neutrons, and electrons is the foundation of chemistry:

  • The number of protons tells you the element.
  • The number of electrons (in a neutral atom) equals the number of protons.
  • Chemical reactions involve the transfer or sharing of electrons, not changes to the nucleus.
  • Nuclear reactions (fission, fusion) involve changes to protons and neutrons, releasing enormous energy.

For lab calculations like molarity, you use atomic/molar masses, which depend on the number of protons and neutrons. For example, to make a 1 M solution of NaCl, you need 58.44 g of NaCl per liter—that mass comes from the atomic weights of sodium (22.99) and chlorine (35.45).

Frequently Asked Questions

What is the difference between atomic number and mass number?

Atomic number (Z) is the number of protons in the nucleus—it defines the element. Mass number (A) is the total number of protons plus neutrons. For example, carbon-14 has Z=6 and A=14, so it has 8 neutrons.

Why are neutrons neutral?

Neutrons are made of three quarks: two down quarks and one up quark. The charges of these quarks (+2/3 for up, −1/3 for down) add up to 0. In contrast, a proton has two up and one down quark, giving +1.

Can an atom lose a proton?

Yes, but only through nuclear processes, not chemical reactions. For example, in beta-plus decay, a proton can turn into a neutron and emit a positron, changing the element. This happens in radioactive isotopes.

How big is an atom compared to its nucleus?

An atom is about 1 × 10-10 m in diameter, while the nucleus is about 1 × 10-15 m. That’s a factor of 100,000. If the nucleus were the size of a marble, the atom would be about a kilometer across.

Do electrons contribute to mass?

Yes, but very little. An electron’s mass is about 1/1836 of a proton’s, so electrons contribute less than 0.06% of an atom’s total mass. That’s why atomic mass is almost entirely from protons and neutrons.

What holds electrons around the nucleus?

The electromagnetic force: the positive nucleus attracts the negative electrons. However, quantum mechanics shows that electrons don’t “fall in” because they have wave-like properties and occupy discrete energy levels.

Safety and Lab Practice

When preparing solutions in a laboratory, always follow your lab method, the safety data sheet (SDS), and your supervisor. Use appropriate personal protective equipment (gloves, goggles, lab coat). For the molarity calculation, ensure you measure the final volume correctly—use a volumetric flask for precise work. Never taste or inhale chemicals, and dispose of waste properly.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →