molecalculator

Moles & Molar Mass

Potassium Melting Point and Boiling Point

Calculator No. 01-12524 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Potassium melts at 63.5 °C (146.3 °F) and boils at 759 °C (1398 °F). These are the standard values at 1 atmosphere of pressure, making potassium a low-melting alkali metal that is solid at room temperature but melts easily on a warm stove top.

Formula

The melting point and boiling point are physical constants of the element potassium (K, atomic number 19). No formula calculates them from first principles; they are determined experimentally and reported in standard reference tables. The calculator above simply compares an input temperature to the accepted values: below 63.5 °C potassium is solid, between 63.5 °C and 759 °C it is liquid, and above 759 °C it is a gas. The values are given in degrees Celsius at standard atmospheric pressure (1 atm = 101.325 kPa).

Worked Example

Suppose you want to know the state of potassium at 25 °C (room temperature). Using the calculator with t = 25 °C:

  • Compare 25 °C to the melting point (63.5 °C): 25 < 63.5, so potassium is solid.
  • No need to check the boiling point because the substance is already below the melting point.
  • Result: Solid.

Now try t = 100 °C. Since 100 > 63.5 but 100 < 759, potassium is liquid. At t = 800 °C, it is a gas. The calculator returns the state as a text label, not a numeric value.

Assumptions

  • Pressure is exactly 1 atmosphere (101.325 kPa).
  • Potassium is pure and in its most common isotope mixture (natural abundance).
  • The melting and boiling points are the standard values from the CRC Handbook of Chemistry and Physics.

Background: Why Potassium Melts So Low

Potassium is an alkali metal in Group 1 of the periodic table. Its melting point of 63.5 °C is one of the lowest among metals—only a few elements like mercury (−38.8 °C), cesium (28.5 °C), and gallium (29.8 °C) melt at lower temperatures. The low melting point arises from weak metallic bonding: each potassium atom has only one valence electron, which is loosely held in a large atomic radius (about 227 pm). The delocalized electron cloud is spread thinly, so the attractive forces between the positive ions and the electron sea are weak. As you go down Group 1 from lithium to cesium, atomic radius increases and melting points decrease: lithium melts at 180.5 °C, sodium at 97.8 °C, potassium at 63.5 °C, rubidium at 39.3 °C, and cesium at 28.5 °C. The boiling point follows a similar trend, though the values are less commonly quoted.

How the Melting and Boiling Points Are Measured

Melting points are measured by heating a sample slowly and observing the temperature at which the solid and liquid phases coexist. For potassium, this is straightforward with a thermometer and a controlled heat source, but the reactivity of the metal complicates things—it must be kept under an inert atmosphere or mineral oil to prevent reaction with oxygen or moisture. Boiling points are measured by heating the liquid until its vapor pressure equals the external pressure. For potassium, the boiling point of 759 °C is determined using a sealed apparatus under an inert gas, because at that temperature the metal reacts vigorously with air. The values are also pressure-dependent: at lower pressure, the boiling point decreases, which is why vacuum distillation of potassium is possible at lower temperatures.

Common Problems and Misconceptions

  • Confusing melting with softening: Potassium does not soften gradually; it has a sharp melting point. However, if it is impure, the melting range broadens.
  • Assuming it is liquid at room temperature: A common myth is that all alkali metals are soft and liquid. Actually, potassium is a solid at 25 °C, though it is soft enough to cut with a knife.
  • Using the wrong pressure: The boiling point of 759 °C is only valid at 1 atm. At higher altitudes, it boils at a lower temperature, but the effect is small for metals because their vapor pressures are low.
  • Ignoring the reactivity: When handling potassium, it reacts violently with water, producing hydrogen gas and heat. This is not a melting point issue, but it affects how you measure and use the metal.

Comparisons with Other Alkali Metals

Potassium sits between sodium and rubidium in Group 1. Its melting point (63.5 °C) is lower than sodium’s (97.8 °C) but higher than rubidium’s (39.3 °C). The boiling point of potassium (759 °C) is also intermediate: sodium boils at 883 °C, rubidium at 688 °C. This trend reflects the increasing atomic size and weaker metallic bonding as you move down the group. For practical applications, the low melting point of potassium means it can be used as a heat-transfer fluid in some specialized nuclear reactors (as a sodium-potassium alloy, NaK, which is liquid at room temperature). The NaK alloy, typically 77% potassium by weight, melts at about −12.6 °C, which is much lower than either pure metal.

Practical Considerations and Safety

If you work with potassium in a laboratory, you must handle it under an inert atmosphere or mineral oil because it oxidizes rapidly in air and reacts explosively with water. The melting point is relevant because storing potassium in a container above 63.5 °C would cause it to melt, which is rarely an issue at room temperature. When melting potassium for experiments, use a hot plate set to about 70–80 °C, but always under a fume hood and with proper protective equipment. Never touch potassium with bare hands; the heat from its reaction with skin moisture can cause severe burns. For disposal, small pieces can be reacted with ethanol or isopropanol in a controlled manner, but always follow your lab’s safety data sheet (SDS) and supervisor’s instructions. The boiling point is less often encountered in routine work because heating potassium to 759 °C requires a specialized furnace and inert atmosphere.

Frequently Asked Questions

Is potassium a liquid at room temperature? No, potassium is a solid at 25 °C. It melts at 63.5 °C, which is warmer than a typical room. However, an alloy of sodium and potassium (NaK) can be liquid at room temperature.

Why does potassium have a low melting point compared to iron? Iron has a melting point of 1538 °C because it has more valence electrons (four) and a smaller atomic radius, leading to stronger metallic bonding. Potassium has only one valence electron and a large radius, so the bonding is weak.

Does potassium melt in boiling water? No, because water boils at 100 °C, which is above potassium’s melting point (63.5 °C). So if you drop potassium into boiling water, it will melt and then react violently with the water. Never do this; it is extremely dangerous.

What is the melting point of potassium in Fahrenheit? The melting point is 63.5 °C, which converts to 146.3 °F (using F = C × 9/5 + 32). The boiling point is 759 °C, which is 1398 °F.

Why is potassium stored in oil? Potassium is stored under mineral oil to prevent contact with oxygen and moisture in the air. The oil does not affect its melting point; it just keeps the metal from reacting before you use it.

Can you use potassium as a coolant? Pure potassium is not commonly used as a coolant because it is solid at room temperature. However, the NaK alloy (sodium-potassium) is liquid at room temperature and is used as a coolant in some fast-neutron nuclear reactors. Its melting point is about −12.6 °C.

Related

Formula used
in t | Temperature | °C | 25 | -273.15 | 2000
out state | Physical state at given temperature | - | t < 63.5 ? "Solid" : (t < 759 ? "Liquid" : "Gas") | 0
out melt | Melting point | °C | 63.5 | 0 | 1000
out boil | Boiling point | °C | 759 | 0 | 2000

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →