molecalculator

Moles & Molar Mass

Sodium Chloride Molar Mass Calculator and Formula

Calculator No. 01-12411 · Updated · Formula and assumptions shown below

Molar mass of NaCl 58.44 g/mol
Mass from amount
2.922 g
= Amount of NaCl × Molar mass of NaCl
Amount from mass
0.05000 mol
= Mass of NaCl ÷ Molar mass of NaCl
Amount of NaCl
0.05 mol
Set in the form below
You enter
Amount of NaCl (mol), Mass of NaCl (g)
You get
Molar mass of NaCl (g/mol), Mass from amount (g), Amount from mass (mol)
Rounding
2 dp · 3 dp · 5 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Calculate sodium chloride’s molar mass by adding the atomic masses of sodium and chlorine: 22.990 + 35.45 = 58.44 g/mol (rounded to two decimal places). Enter the number of moles to find the corresponding mass of NaCl, or enter a sample mass to calculate its amount in moles; the calculator shows both results.

Formula

The molar mass of a compound is the sum of the standard atomic weights of all atoms in one formula unit. Sodium chloride has one sodium atom and one chlorine atom, so M(NaCl) = 1 × 22.990 + 1 × 35.45 = 58.44 g/mol when rounded to two decimal places. The first calculator result is this molar mass.

  • M(NaCl) is sodium chloride’s molar mass, in grams per mole (g/mol).
  • n is the amount of sodium chloride, in moles (mol).
  • m is the sample mass, in grams (g).

The related mass–amount equations are m = n × M and n = m ÷ M. The calculator uses 22.990 g/mol for sodium and 35.45 g/mol for chlorine, consistent with the IUPAC abridged standard atomic weights specified for this calculation. Its displayed molar mass is rounded to 58.44 g/mol; the amount-from-mass calculation uses the unrounded sum, 58.440 g/mol.

Worked Example

Using the calculator’s default inputs, the sample has n = 0.05 mol and m = 2.922 g.

  1. Add the atomic masses: M(NaCl) = 22.990 + 35.45 = 58.44 g/mol.
  2. Find the mass represented by the amount: m = n × M = 0.05 mol × 58.440 g/mol = 2.922 g.
  3. Find the amount represented by the sample mass: n = m ÷ M = 2.922 g ÷ 58.440 g/mol = 0.050000 mol.

The mass and amount agree: 0.05 mol of NaCl has a calculated mass of 2.922 g under the stated atomic-weight convention.

Assumptions

  • The chemical formula is NaCl, with one sodium atom for each chlorine atom.
  • The calculation treats the sample as pure sodium chloride; impurities or water in a real sample change how much NaCl its measured mass contains.
  • Atomic weights are the stated conventional values. Natural isotopic variation and the precision of a particular sample can make its measured molar mass differ slightly.
  • This is a formula-mass calculation, not a solution-concentration calculation. It does not assume a particular solvent, temperature, or degree of dissolution.

Why Sodium Chloride Has This Molar Mass

Sodium chloride is an ionic compound made of sodium and chloride ions arranged in a crystal lattice. The formula NaCl indicates the simplest whole-number ratio of ions: one Na+ for each Cl−. It does not describe a separate molecule in the solid. Nevertheless, chemists use “molar mass of NaCl” for the mass of one mole of formula units, calculated from the same 1:1 composition.

A mole is a specified amount of substance containing exactly 6.02214076 × 1023 elementary entities. For NaCl, those entities are formula units. Multiplying the mass per mole by an amount in moles gives a sample mass in grams; dividing grams by grams per mole gives moles. The units provide a useful check: mol × g/mol simplifies to g, while g ÷ (g/mol) simplifies to mol.

How to Use the Calculator

The calculator keeps the molar mass fixed by the NaCl formula and provides conversions in both directions. Enter an amount in moles to obtain its theoretical mass, or enter a mass in grams to obtain the corresponding amount. The default values illustrate the same sample both ways.

  • For 1.00 mol NaCl, multiply by 58.440 g/mol: the mass is 58.440 g.
  • For 10.0 g NaCl, divide by 58.440 g/mol: the amount is about 0.171 mol.
  • For 0.500 mol NaCl, the mass is 29.220 g using the calculator’s unrounded molar mass.

Use consistent units: the mass input is in grams and the amount input is in moles. If a value is provided in milligrams, convert it to grams first (1 g = 1000 mg); for example, 250 mg is 0.250 g. If an amount is given in millimoles, convert it to moles by dividing by 1000; 25 mmol is 0.025 mol.

Common Mistakes and Rounding

A frequent error is to use the atomic mass of only one element. NaCl contains both sodium and chlorine, so its molar mass is their sum, not 22.990 g/mol or 35.45 g/mol alone. Another error is to treat the subscripts in a formula as optional: a subscript would multiply that element’s contribution. NaCl has no written subscripts, which means one atom of each element in the formula unit.

Do not confuse molar mass with the mass of a particular sample. The molar mass remains about 58.44 g/mol, while the sample mass depends on how many moles are present. Also distinguish amount in moles from concentration: molarity requires the amount and the final solution volume in liters, and cannot be determined from molar mass alone.

Round only at the end when possible. The calculator displays 58.44 g/mol, but calculations use the sum 58.440 g/mol. A result reported to more decimal places is not necessarily more experimentally accurate: the balance precision, sample purity, and uncertainty of the supplied measurements matter too. For a typical classroom conversion, two or three significant figures in the final result are often appropriate when they match the precision of the input.

What the Result Can and Cannot Tell You

This calculation converts between the mass of pure NaCl and the number of moles it represents. It does not show how much sodium chloride is dissolved in a given volume, whether a sample is pure, or how much of a weighed commercial material is actually NaCl. Those questions require additional information, such as solution volume or a measured purity fraction.

For a solution, molarity is amount divided by final solution volume in liters. If you know the desired amount, use mass = amount × 58.44 g/mol to calculate the corresponding pure-NaCl mass, then use the specified method to determine the final solution volume. Do not treat the volume of solvent added as automatically equal to the final solution volume; dissolving a solute can change the total volume. For bench work, follow your lab method, the safety data sheet (SDS) and your supervisor.

Frequently Asked Questions

What is the molar mass of sodium chloride?
It is 58.44 g/mol when calculated from sodium at 22.990 and chlorine at 35.45 g/mol and rounded to two decimal places.

How do you calculate the molar mass of NaCl?
Add the atomic masses in its formula: one sodium contribution plus one chlorine contribution, or 22.990 + 35.45 = 58.44 g/mol.

How many grams are in one mole of NaCl?
One mole has a mass of about 58.44 g. This follows directly from the molar mass, 58.44 g/mol.

How many moles are in 10 grams of NaCl?
Divide the mass by the molar mass: 10 g ÷ 58.44 g/mol ≈ 0.171 mol. The result is approximate because the input mass has only two significant figures.

Is NaCl a molecule or a formula unit?
Solid sodium chloride is an ionic lattice rather than a collection of separate NaCl molecules. NaCl is its formula unit, showing the 1:1 ratio of sodium to chloride ions.

Related

Formula used
in n | Amount of NaCl | mol | 0.05 | 0
in m | Mass of NaCl | g | 2.922 | 0
out mm | Molar mass of NaCl | g/mol | 22.990 + 35.45 | 2
out mass | Mass from amount | g | n * mm | 3
out amount | Amount from mass | mol | m / mm | 5

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →