The formula mass of sodium hydrogen carbonate, NaHCO₃, is 84.006 g/mol when expressed as its molar mass, or about 84.01 u for one formula unit. Enter the numbers of NaHCO₃ formula units to calculate their total mass in grams; the result uses the standard atomic weights shown in the formula.
Formula
The molar mass is the sum of the atomic masses of every atom represented in one formula unit. For NaHCO₃:
M = A(Na) + A(H) + A(C) + 3 × A(O)
- M is molar mass, in grams per mole (g/mol).
- A(Na) is the abridged standard atomic weight of sodium: 22.990.
- A(H) is hydrogen: 1.008.
- A(C) is carbon: 12.011.
- A(O) is oxygen: 15.999; the subscript 3 means there are three oxygen atoms.
Adding the atomic weights gives M = 22.990 + 1.008 + 12.011 + 3 × 15.999 = 84.006 g/mol. The calculator applies this molar mass to the amount entered: m = n × M, where m is mass in grams and n is amount in moles. Since M is fixed for this formula, this is the mass corresponding to the specified amount.
Worked Example
Using the default input of 1 mol:
- Calculate the molar mass: M = 22.990 + 1.008 + 12.011 + 3 × 15.999 = 84.006 g/mol.
- Multiply by the amount: m = 1 mol × 84.006 g/mol = 84.006 g.
- Rounded to the calculator’s whole-gram display, the result is 84 g.
Assumptions
- The input is an amount in moles of pure, anhydrous NaHCO₃, not a mass in grams or a solution volume.
- The calculation uses IUPAC abridged standard atomic weights and treats the displayed formula as one neutral formula unit.
- It calculates chemical mass only; it does not account for moisture, impurities, measurement uncertainty, or a particular product’s purity.
What Formula Mass Means
Sodium hydrogen carbonate is an ionic compound, so its solid is not made of separate, discrete NaHCO₃ molecules in the way a molecular substance may be. Its formula indicates the simplest whole-number ratio of ions in the crystal: one sodium ion for each hydrogen carbonate ion. For ionic substances, “formula mass” is the appropriate term for the mass represented by that formula unit.
The number 84.006 is commonly called the molar mass when its unit is g/mol. The corresponding mass of one formula unit is approximately 84.006 unified atomic mass units (u), also called daltons (Da). These are related quantities but have different units: molar mass describes a mole of formula units, while formula-unit mass describes one. In everyday chemistry, people often use “formula mass” and “molar mass” loosely; checking the units removes the ambiguity.
Why the Formula Is NaHCO₃
The name sodium hydrogen carbonate describes the ions Na⁺ and HCO₃⁻. Their charges balance in a one-to-one ratio, giving NaHCO₃. It is also widely known as sodium bicarbonate or baking soda. The word “hydrogen” matters: the carbonate ion is CO₃²⁻, while hydrogen carbonate carries one hydrogen and has a −1 charge. Confusing hydrogen carbonate with sodium carbonate, Na₂CO₃, produces the wrong atom count and therefore the wrong formula mass.
Counting atoms directly is a reliable check. NaHCO₃ contains one sodium, one hydrogen, one carbon, and three oxygen atoms. The subscript 3 applies only to oxygen; it does not multiply the entire formula. Parentheses would change the count if present, but none appear in this formula.
Using the Value in Calculations
A molar mass connects a weighed sample to an amount of substance. To convert a mass in grams to moles, divide by 84.006 g/mol. For example, 10.00 g corresponds to 10.00 g ÷ 84.006 g/mol ≈ 0.1190 mol. To convert moles to grams, multiply by 84.006 g/mol. Keep units in each step: grams divided by grams per mole leaves moles.
This relationship is useful in stoichiometry, where a balanced chemical equation gives mole ratios. First convert a known mass to moles, apply the equation’s ratio, then convert the resulting amount to mass if needed. The molar mass alone does not tell you how much substance reacts or what products form; those answers also depend on the balanced reaction and the amount of other reactants.
For a sample with a stated purity, the mass of pure NaHCO₃ is not necessarily the full measured mass. If purity is expressed as a fraction, multiply the sample mass by that fraction before converting to moles. For instance, a material that is 95% NaHCO₃ contains 0.95 g of NaHCO₃ per gram of sample. The calculator’s formula assumes pure material, so use an appropriate purity correction separately when the problem requires one.
Precision, Rounding, and Common Errors
The atomic weights used here sum to 84.006 g/mol. A commonly reported practical value is 84.01 g/mol, and some references display 84.0 g/mol. These are rounded representations of the same calculation, not different chemical formulas. Match the precision of the answer to the precision of the input data and the purpose of the calculation. A balance reading to 0.01 g does not justify reporting a measured sample as though its mass were known to many more decimal places.
- Do not omit the oxygen subscript. There are three oxygen atoms, contributing 47.997 g/mol altogether.
- Do not confuse formula mass with sample mass. 84.006 g/mol is a conversion factor, not the mass of every container or sample.
- Keep units consistent. A value in milligrams must be converted to grams before using a mass-to-moles calculation in these units; 1 g = 1000 mg.
- Distinguish the compound from sodium carbonate. Na₂CO₃ has a different formula and molar mass.
The atomic weights are conventional values appropriate for standard chemistry calculations. Exact isotopic composition can shift the mass slightly, and actual samples can contain water or impurities. Those effects matter in high-precision work but are not represented by the simple formula-mass calculation.
Frequently Asked Questions
What is the formula mass of NaHCO₃?
It is 84.006 u per formula unit using the stated abridged standard atomic weights. As a molar mass, the corresponding value is 84.006 g/mol, commonly rounded to 84.01 g/mol.
Is sodium hydrogen carbonate the same as baking soda?
Yes. Sodium hydrogen carbonate is the systematic name for the compound commonly called sodium bicarbonate or baking soda. Its formula is NaHCO₃.
Why do some sources say 84.01 and others say 84.0?
They round the same calculated value, 84.006 g/mol, to different numbers of decimal places. The unrounded result is not a claim that a physical sample can be measured to six decimal places.
How many moles are in 1 gram of sodium hydrogen carbonate?
Divide 1 g by 84.006 g/mol: 1 ÷ 84.006 ≈ 0.01190 mol. The answer assumes the gram is pure NaHCO₃.
Is 84.006 the mass of one NaHCO₃ particle?
No. The value 84.006 g/mol describes one mole of formula units. The mass of one formula unit is approximately 84.006 u; the different units indicate the different scales.
Related
Formula used
in n | Amount of NaHCO3 | mol | 1 | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s