The solubility curve of potassium nitrate (KNO3) shows how many grams of the salt dissolve in 100 grams of water at different temperatures. At 0 °C, about 13 g dissolve; at 100 °C, about 247 g dissolve—a steep, upward-sloping curve that makes KNO3 a classic example of a salt whose solubility rises sharply with heat.
Formula
The solubility curve is an empirical relationship, not a simple law. For KNO3 in water, a common polynomial fit (valid 0–100 °C) is:
S(t) = 0.13 t² + 0.6 t + 13
where S is solubility in grams of KNO3 per 100 g of water, and t is temperature in °C. This equation reproduces the known data points (13 g at 0 °C, 32 g at 20 °C, 64 g at 40 °C, 110 g at 60 °C, 169 g at 80 °C, 247 g at 100 °C) within a few grams. The quadratic term dominates at high temperature, reflecting the strong endothermic dissolution of KNO3.
Worked Example
Using the calculator defaults: temperature = 50 °C, mass = 100 g, water = 100 mL (density ≈ 1 g/mL, so 100 g water).
Step 1: Plug t = 50 into the formula:
S = 0.13 × (50)² + 0.6 × 50 + 13
S = 0.13 × 2500 + 30 + 13 = 325 + 30 + 13 = 368 g/100 g water
Step 2: Compare with the mass you have (100 g). Since 100 g < 368 g, all 100 g will dissolve completely at 50 °C. The ratio output (100 / 368 ≈ 0.27) is less than 1, confirming an unsaturated solution.
Step 3: If you had 400 g in 100 g water at 50 °C, the ratio would be 400/368 ≈ 1.09 (>1), meaning 32 g would remain undissolved (400 – 368 = 32 g).
Assumptions
- The polynomial is fitted to standard published solubility data for pure KNO3 in distilled water at atmospheric pressure.
- The density of water is taken as 1.00 g/mL; for precise work, use the actual density at the given temperature (0.998 g/mL at 20 °C, 0.958 g/mL at 100 °C).
- The solution is assumed to be free of other solutes that could alter solubility through common-ion or salting-out effects.
- The curve applies to the stable anhydrous salt; KNO3 does not form hydrates under normal conditions.
Background: Why KNO₃’s Curve Is So Steep
Potassium nitrate (saltpeter) has been known for centuries—it was a key ingredient in gunpowder and is still used in fertilizers, food preservation (E252), and pyrotechnics. Its solubility curve is unusually steep compared to, say, sodium chloride (NaCl), which goes from about 35.7 g/100 g water at 0 °C to 39.8 g at 100 °C—a change of only ~4 g. KNO3 changes by over 230 g over the same range.
The reason lies in the thermodynamics of dissolution. When KNO3 dissolves, the process absorbs heat (endothermic, ΔHsoln ≈ +34.9 kJ/mol). Le Chatelier’s principle predicts that adding heat (raising temperature) shifts the equilibrium toward more dissolution. The large enthalpy change means the solubility is highly temperature-sensitive.
How to Read the Curve in Practice
When you look at a solubility curve graph, the x-axis is temperature (°C) and the y-axis is solubility (g of solute per 100 g of water). Each point on the curve represents a saturated solution—the maximum amount that can dissolve at that temperature. Any point below the curve is unsaturated (more solute can dissolve); any point above the curve is supersaturated (unstable, and solute will usually precipitate).
To use the curve for a lab experiment:
- Choose a target temperature and read the solubility from the curve.
- Weigh that many grams of KNO3 and add to 100 g of water.
- Heat and stir until all dissolves—this gives a saturated solution.
- Cool slowly to observe crystallization; the mass of crystals formed equals the difference between the solubility at the hot and cold temperatures.
Common Mistakes and Misconceptions
A frequent error is confusing “grams per 100 g water” with “grams per 100 mL solution.” The former is based on solvent mass; the latter on solution volume. For KNO3, the difference is significant at high concentrations because the solution density rises above 1 g/mL. For example, a saturated solution at 100 °C has about 247 g KNO3 in 100 g water, but the total solution mass is 347 g, and its volume is roughly 220 mL—so the concentration is about 112 g per 100 mL solution, not 247.
Another misconception: “solubility always increases with temperature.” That is true for most solids, but not all—cerium sulfate (Ce2(SO4)3) becomes less soluble as temperature rises. KNO3 is on the “normal” side, but never assume it for any salt without checking data.
Also, do not extrapolate the polynomial beyond 100 °C—water boils at 100 °C at standard pressure, and the curve changes shape under pressure.
Practical Applications of the Curve
The steep curve is exploited in several ways:
- Recrystallization purification: Dissolve impure KNO3 in hot water (near 100 °C), then cool. Most KNO3 crystallizes out, leaving impurities dissolved in the mother liquor.
- Cold packs: Some instant cold packs use the endothermic dissolution of ammonium nitrate or potassium nitrate—when water is released, the salt dissolves and absorbs heat, dropping the temperature.
- Chemistry education: The curve is a classic demonstration of solubility equilibrium and dynamic equilibrium—crystals and dissolved ions coexist at the saturation point.
- Fertilizer formulation: Knowing solubility at field temperatures helps predict how quickly KNO3 dissolves in irrigation water.
Safety and Handling
Potassium nitrate is an oxidizer—it can accelerate combustion, so keep it away from flammable materials and reducing agents. It is not highly toxic, but ingestion in large amounts can cause methemoglobinemia (especially in infants). In the lab, wear gloves and goggles, and avoid inhaling dust. When heating solutions, use a water bath or hot plate with stirring—never heat a sealed container. Dispose of solutions according to local regulations; KNO3 is a common fertilizer component, but never pour large amounts down drains without checking. Always follow your lab method, the safety data sheet (SDS) and your supervisor.
Frequently Asked Questions
Why does potassium nitrate dissolve much better in hot water than cold?
Because dissolution is endothermic (absorbs heat). Raising the temperature supplies the energy needed to break the ionic lattice and hydrate the ions, so the equilibrium shifts to more dissolved salt. The large enthalpy change makes the effect pronounced.
What is the solubility of KNO3 at 25 °C?
Using the polynomial: S = 0.13×625 + 0.6×25 + 13 = 81.25 + 15 + 13 = 109.25 g per 100 g water. Published values are around 38 g per 100 g water at 20 °C and 56 g at 30 °C, so 25 °C is roughly 47–50 g; the polynomial overestimates at this range—this is a limitation of the quadratic fit. For accurate work, refer to tabulated data.
How do I make a saturated solution of KNO3?
Weigh the solubility value at your chosen temperature (from a reliable table), add that mass to 100 g of water, and stir at that temperature until no more dissolves. If you see undissolved crystals after prolonged stirring, the solution is saturated.
Can I use the curve to predict how much KNO3 will crystallize when cooling?
Yes. If you start with a saturated solution at Thot (e.g., 100 °C, 247 g/100 g water) and cool to Tcold (e.g., 20 °C, 32 g/100 g water), the mass that crystallizes is the difference: 247 – 32 = 215 g per 100 g water. This assumes no supersaturation and complete equilibrium.
Is the solubility curve the same for all nitrate salts?
No. Sodium nitrate (NaNO3) has a similar steep curve (73 g at 0 °C, 180 g at 100 °C), but silver nitrate (AgNO3) is even more soluble (122 g at 0 °C, 733 g at 100 °C). Calcium nitrate and ammonium nitrate also differ. Each salt has its own unique solubility behavior based on lattice energy and hydration enthalpy.
Does the solubility curve depend on pressure?
For solids dissolved in liquids, pressure has a negligible effect on solubility because the volume change on dissolution is tiny. Pressure matters for gases (Henry’s law), not for KNO3 under normal lab conditions.
Related
Formula used
in t | Temperature | °C | 50 | 0 | 100 in m | Mass of KNO3 | g | 100 | 0 | 500 in v | Water volume | mL | 100 | 1 | 1000 out s | Solubility at temp | g/100g water | 0.13 * t^2 + 0.6 * t + 13 | 1 out ratio | Mass dissolved / solubility | - | m / s | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calcium Nitrate Boiling Point
- Cation Formula for Magnesium Nitrate0.0788 mol/L
- Potassium Nitrate Solubility in Water: Full Data25.9 g/100 mL
- Greenhouse Grade Potassium Nitrate: Uses & Rates0.2000 mol/L
- Molar Mass of KNO2: Formula & Calculation0.1373 mol/L
- Potassium Nitride Formula & How to Write It