Potassium nitrate (KNO₃) is highly soluble in water: at 25 °C, about 38 g dissolves in 100 mL of water, and at 100 °C, about 247 g dissolves in 100 mL. Its solubility increases dramatically with temperature, which is why it is a classic example in chemistry labs for recrystallization and solubility curves.
Formula
The solubility of potassium nitrate is expressed as the mass of solute that dissolves in a given volume of water, typically in grams per 100 mL. The calculator uses:
Solubility (g/100 mL) = (mass of KNO₃ / volume of water in mL) × 100
For molarity, the formula is:
Molarity (mol/L) = (mass / molar mass) / (volume in L)
Where the molar mass of KNO₃ is 101.103 g/mol (K: 39.098, N: 14.007, O₃: 3 × 15.999). The temperature input is informational; the calculator does not model the solubility curve, but you can use it to check your own measured or tabulated values.
Worked Example
Using the default values: 38 g of KNO₃ in 100 mL of water at 25 °C.
- Solubility = 38 / (100 / 100) = 38 g/100 mL
- Moles = 38 / 101.103 = 0.37585 mol
- Volume in L = 100 / 1000 = 0.1 L
- Molarity = 0.37585 / 0.1 = 3.7585 mol/L ≈ 3.759 M
The calculator gives 38.00 g/100 mL and 3.759 M.
Assumptions
- Pure potassium nitrate (no impurities affecting solubility).
- Water is the only solvent; no co-solvents or dissolved salts.
- The solution is saturated at the given temperature (no supersaturation).
- Volume of water is used, not final solution volume (for practical prep, the difference is small at these concentrations).
Background: Why KNO₃ Dissolves So Well
Potassium nitrate is an ionic compound composed of K⁺ and NO₃⁻ ions. Water, a polar solvent, surrounds and stabilizes these ions through ion-dipole interactions. The nitrate ion is large and has a single negative charge spread over three oxygen atoms, which reduces its charge density and makes it easier for water to pull it apart from the crystal lattice. The potassium ion is small but has a low charge (+1), so the lattice energy is moderate. The net result is a favorable enthalpy of dissolution (the process is endothermic but entropy-driven) and high solubility.
Solubility Curve and Temperature Dependence
Unlike many salts (e.g., NaCl) whose solubility barely changes with temperature, KNO₃ shows a steep increase. Approximate solubilities in g per 100 mL water:
- 0 °C: ~13 g
- 20 °C: ~32 g
- 40 °C: ~64 g
- 60 °C: ~110 g
- 80 °C: ~169 g
- 100 °C: ~247 g
This strong temperature dependence is why KNO₃ is used in hot packs (dissolution is endothermic, so it cools) and in recrystallization: dissolve in hot water, then cool to precipitate pure crystals.
How to Use the Calculator for Lab Prep
If you need to prepare a saturated solution at a specific temperature, look up the solubility from a reliable table, then enter the mass and volume. For an unsaturated solution, enter the actual mass you plan to use; the calculator will show you the concentration. To make a solution of a given molarity (e.g., 2 M), you would enter the mass calculated from the molarity formula, not the solubility. This calculator is for checking solubility, not for preparing a specific molarity from scratch.
Common Mistakes and Misconceptions
- Confusing g/100 mL with g/100 g water: At room temperature, 100 mL of water weighs about 100 g, so the difference is small, but at higher temperatures, water density changes. Always specify which basis you use.
- Using final volume instead of water volume: When you dissolve 38 g of KNO₃ in water, the final solution volume is slightly more than 100 mL. For solubility, the convention is grams per 100 mL of solvent, not solution.
- Assuming solubility is linear: The curve is not a straight line; it accelerates at higher temperatures. Don’t interpolate linearly between 60 °C and 80 °C for a 70 °C estimate; use a polynomial or table.
- Forgetting that KNO₃ is an oxidizer: It is not flammable itself, but it supplies oxygen to a fire. Keep it away from combustible materials, especially when molten or in concentrated solutions.
Comparison with Other Nitrates and Potassium Salts
Potassium nitrate is more soluble than potassium chloride (KCl, ~34 g/100 mL at 20 °C) and potassium sulfate (K₂SO₄, ~12 g/100 mL at 20 °C). Among nitrates, sodium nitrate (NaNO₃) is even more soluble (~92 g/100 mL at 25 °C), but KNO₃ is preferred in many applications because it provides both potassium and nitrogen as nutrients. The solubility of KNO₃ is also higher than that of potassium bromide (KBr, ~65 g/100 mL at 25 °C) but lower than that of potassium iodide (KI, ~148 g/100 mL at 25 °C).
Safety and Handling
Potassium nitrate is a strong oxidizer. It can cause skin and eye irritation. When heating solutions, avoid boiling to dryness, as the residue can ignite organic materials. Do not mix KNO₃ with reducing agents, acids, or ammonium salts—this can produce dangerous reactions. Always wear gloves and safety goggles, and work in a well-ventilated area. Follow your lab method, the safety data sheet (SDS) and your supervisor. For disposal, check local regulations; small amounts can be flushed with plenty of water, but large quantities should be handled as chemical waste.
Frequently Asked Questions
Is potassium nitrate soluble in alcohol?
Potassium nitrate is essentially insoluble in ethanol and other organic solvents. Its solubility in water is due to the polar nature of water; alcohols have lower dielectric constants and cannot stabilize the ions as effectively. You can use this property to precipitate KNO₃ by adding ethanol to an aqueous solution.
Why does KNO₃ dissolve faster in hot water?
Two reasons: first, the solubility is higher at higher temperatures, so more solute can dissolve; second, the rate of dissolution increases because the molecules move faster and collisions with the crystal surface are more energetic. However, even at room temperature, stirring will speed up the process.
What is the molar solubility of KNO₃ at 25 °C?
Molar solubility is the number of moles that dissolve per liter of water. At 25 °C, with 38 g per 100 mL, that is 38 g / 101.103 g/mol = 0.3759 mol in 0.1 L, so 3.759 mol/L. This is the same as the molarity of a saturated solution.
Can I use this calculator for other salts?
No, this calculator is specifically for KNO₃ because it uses the molar mass of KNO₃ in the molarity output. However, you can adapt the solubility formula manually for any salt by dividing the mass by its own molar mass. The solubility in g/100 mL is independent of the salt’s identity, but the molarity requires the correct molar mass.
Does the solubility of KNO₃ change with pressure?
For solids dissolved in liquids, pressure has a negligible effect on solubility. Only gases show significant pressure dependence (Henry’s law). So you can ignore pressure for KNO₃ solutions.
What is the difference between solubility and dissolution rate?
Solubility is the maximum amount that can dissolve at equilibrium (a thermodynamic property). Dissolution rate is how fast that equilibrium is reached (a kinetic property). You can have a highly soluble salt that dissolves slowly if the crystals are large and unstirred. Grinding and stirring increase the rate, not the solubility.
Related
Formula used
in m | Mass of KNO₃ | g | 38 | 0 in v | Volume of water | mL | 100 | 0.001 in t | Temperature | °C | 25 | 0 out s | Solubility | g/100 mL water | m / (v / 100) | 2 out c | Molarity | mol/L | (m / 101.103) / (v / 1000) | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calcium Nitrate Boiling Point
- Cation Formula for Magnesium Nitrate0.0788 mol/L
- Potassium Nitrate Solubility in Water: Full Data25.9 g/100 mL
- Greenhouse Grade Potassium Nitrate: Uses & Rates0.2000 mol/L
- Molar Mass of KNO2: Formula & Calculation0.1373 mol/L
- Potassium Nitride Formula & How to Write It