Electron configuration describes how electrons are distributed among the atomic orbitals of an atom. You enter the atomic number (or element symbol) and get the ordered list of orbitals (e.g., 1s² 2s² 2p⁶ …) that shows the energy levels, sublevels, and number of electrons in each. This arrangement determines an element’s chemical behavior, periodic table position, and many of its physical properties.
Formula
The electron configuration is built by filling orbitals in order of increasing energy, following the Aufbau principle. The order of orbital filling is given by the Madelung rule: orbitals are filled in order of increasing (n + ℓ), and for equal (n + ℓ), increasing n. Here, n is the principal quantum number (shell, 1, 2, 3…) and ℓ is the azimuthal quantum number (subshell: s=0, p=1, d=2, f=3).
The standard filling order is:
1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p
Each orbital holds a maximum number of electrons: s holds 2, p holds 6, d holds 10, f holds 14. The total number of electrons equals the atomic number Z (for a neutral atom). The configuration is written as a sequence of subshells, each with a superscript indicating the number of electrons in that subshell.
Worked Example
Let’s find the electron configuration for iron (Fe), which has atomic number Z = 26. We fill orbitals in the order above, adding electrons until we reach 26.
- 1s² → 2 electrons (total 2)
- 2s² → 2 electrons (total 4)
- 2p⁶ → 6 electrons (total 10)
- 3s² → 2 electrons (total 12)
- 3p⁶ → 6 electrons (total 18)
- 4s² → 2 electrons (total 20)
- 3d⁶ → 6 electrons (total 26)
So the configuration is 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d⁶. The calculator gives the same result. Notice that 4s fills before 3d because 4s has lower energy (n+ℓ = 4+0 = 4) than 3d (n+ℓ = 3+2 = 5).
Assumptions
- The atom is neutral, so the number of electrons equals the atomic number.
- The ground state (lowest energy) configuration is assumed; excited states are not considered.
- The Madelung rule (Aufbau) works for all elements up to Z=118, with a few exceptions among transition metals and lanthanides (e.g., chromium and copper) where a half-filled or fully filled d subshell is slightly more stable.
- Orbital energies are approximate; actual energies depend on electron-electron repulsion, but the order is a reliable guide.
Background: Why Electron Configuration Matters
Electron configuration is the foundation of the periodic table. The arrangement of electrons in shells and subshells explains why elements in the same group have similar chemical properties: they have the same number of valence electrons (electrons in the outermost shell). For example, all alkali metals (Li, Na, K, etc.) have one electron in an s orbital, which they readily lose to form +1 ions. The configuration also explains periodic trends like atomic radius, ionization energy, and electronegativity.
The concept emerged from quantum mechanics in the early 20th century. Niels Bohr’s planetary model (1913) introduced discrete energy levels, but it couldn’t explain multi-electron atoms. Erwin Schrödinger’s wave equation (1926) described orbitals as probability distributions, and the Pauli exclusion principle (1925) limited each orbital to two electrons with opposite spins. The Aufbau principle, named from the German “building up,” was formalized by Niels Bohr and others to systematize the filling order.
How to Read an Electron Configuration
Each term in the configuration has three parts: the number (principal quantum number n), the letter (subshell type), and the superscript (number of electrons). For example, in 2p⁶, “2” means the second shell, “p” means the p subshell, and “6” means there are six electrons in that subshell (which is the maximum for p).
The superscripts add up to the atomic number. For iron, 2+2+6+2+6+2+6 = 26. The highest n value indicates the period (row) of the element in the periodic table. Iron is in period 4, which matches the highest n = 4. The last subshell filled tells you the block: s-block, p-block, d-block, or f-block.
How to Write Configurations: Step-by-Step
- Determine the number of electrons (equal to Z for a neutral atom).
- Write the orbital filling order from the Aufbau diagram (or use the diagonal rule).
- Fill each subshell to its maximum capacity, moving to the next when full, until you’ve placed all electrons.
- Write the result as a sequence of subshells with superscripts.
- For ions, add or remove electrons from the highest-energy subshell (for transition metals, remove s electrons before d electrons).
For example, to write oxygen (Z=8): 1s² 2s² 2p⁴. To write the oxide ion O²⁻ (10 electrons): 1s² 2s² 2p⁶.
Common Misconceptions and Pitfalls
- 4s vs 3d order: Many students think 3d fills before 4s because 3d has a lower n, but 4s is lower in energy. After filling, 3d becomes lower in energy, which affects ionization (transition metals lose 4s electrons first).
- Exceptions to the Aufbau rule: Chromium (Z=24) is [Ar] 3d⁵ 4s¹, not [Ar] 3d⁴ 4s², because a half-filled d subshell is more stable. Copper (Z=29) is [Ar] 3d¹⁰ 4s¹ for a fully filled d. Similar exceptions occur in Mo, Ag, Au, and lanthanides.
- Using noble gas shorthand: To save space, configurations are often abbreviated using the preceding noble gas in brackets. For iron, [Ar] 3d⁶ 4s². This is not a different configuration; it’s just a shortcut.
- Confusing electron configuration with orbital diagram: A configuration lists subshells, while an orbital diagram shows individual orbitals with arrows (spin). The configuration doesn’t show unpaired electrons; Hund’s rule does.
Practical Uses in Chemistry and Physics
Electron configuration is used to predict and explain:
- Chemical bonding: Valence electrons determine how atoms bond (ionic, covalent, metallic).
- Magnetic properties: Unpaired electrons in d or f orbitals give rise to paramagnetism (e.g., iron is magnetic because it has unpaired 3d electrons).
- Spectroscopy: Electron transitions between energy levels produce absorption and emission spectra, used to identify elements in stars and materials.
- Periodic trends: Ionization energy, electron affinity, and atomic radius all correlate with the configuration.
- Catalysis: Transition metals with partially filled d orbitals are common catalysts (e.g., iron in the Haber process).
Limitations of the Simple Model
The Aufbau principle is a simplification. For heavy elements, relativistic effects alter orbital energies, and electron correlation becomes significant. The Madelung rule predicts the order for neutral atoms, but for ions or excited states, the order can change. Also, the concept of “orbital” is a probability cloud, not a fixed path; the configuration is a statistical average, not a snapshot. For precise calculations, quantum chemistry methods (Hartree-Fock, DFT) are needed.
Frequently Asked Questions
How do I find the electron configuration of an ion?
For a cation, remove electrons from the highest-energy subshell, which for transition metals is the s subshell first, then the d. For example, Fe²⁺ (Z=26) loses two 4s electrons: [Ar] 3d⁶. For an anion, add electrons to the next available orbital. For O²⁻ (Z=8), add two to 2p: 1s² 2s² 2p⁶.
Why is chromium’s configuration [Ar] 3d⁵ 4s¹ instead of [Ar] 3d⁴ 4s²?
Because a half-filled d subshell (5 electrons with all parallel spins) is more stable than a partially filled one (4 electrons) due to exchange energy and reduced electron-electron repulsion. The energy difference is small, but the stability gain outweighs the cost of promoting an electron from 4s to 3d.
What does the superscript in 2p⁶ mean?
It means there are six electrons in the 2p subshell. The superscript is the number of electrons, not the number of orbitals. The p subshell has three orbitals, each holding two electrons, so six is the maximum.
How does electron configuration relate to the periodic table?
The periodic table is organized by electron configuration. Each row (period) corresponds to the highest principal quantum number (n) being filled. Each column (group) shares the same valence electron configuration, which explains similar chemical properties. The block (s, p, d, f) corresponds to the subshell being filled.
Can electron configuration predict an element’s color?
Not directly, but it helps. The color of transition metal compounds arises from d-d electron transitions that absorb visible light. The energy gap between d orbitals depends on the ligand environment, which is influenced by the configuration. For example, copper compounds are often blue or green because of transitions in the 3d subshell.
What is the difference between electron configuration and orbital diagram?
An electron configuration is a shorthand notation listing subshells and electron counts. An orbital diagram is a visual representation showing each orbital as a box and each electron as an arrow, indicating spin. The diagram also shows Hund’s rule (electrons fill each orbital singly before pairing) and unpaired electrons.
Related
Formula used
in z | Atomic number Z | - | 26 | 1 | 118 out ec | Electron configuration | - | ec_text(z) | 0 out el | Element | - | element_name(z) | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calculate Fahrenheit in R: A Step-by-Step Guide77.00 °F
- d Block Electron Configuration: How It Works
- Electron Configuration of a Carbon Atom0.2000 mol/L
- Electron Configuration of Cl (Chlorine)
- Upp Calculator Ato? Meaning & How to Use It15,750 AUD
- Electron Configuration Notes: How to Write Them