The volume of a solid is the amount of three-dimensional space it occupies, measured in cubic units. This calculator estimates volume for a rectangular prism from its length, width, and height, and returns the result in cubic metres; choose a different solid’s formula if your object has another shape.
Formula
For a rectangular prism, volume equals length multiplied by width multiplied by height:
V = l × w × h
- V is volume in cubic metres (m3).
- l is length in metres (m).
- w is width in metres (m).
- h is height in metres (m).
The second output converts cubic metres to litres using 1 m3 = 1,000 L, so litres = V × 1,000. This conversion is exact. The inputs must all use the same length unit; if they are entered in metres, their product is in cubic metres.
Worked Example
Using the calculator’s default dimensions—length 2 m, width 1.5 m, and height 0.8 m:
V = 2 m × 1.5 m × 0.8 m = 2.4 m3
In litres: 2.4 m3 × 1,000 L/m3 = 2,400 L
The calculator reports a volume of 2.4000 m3, or 2,400.00 L. The displayed precision is not a claim that the dimensions are known to that many significant figures; real measurement uncertainty may be larger.
Assumptions
- The object is a rectangular prism with flat faces and right-angle corners.
- Length, width, and height describe the solid itself and are measured in metres.
- The dimensions are nonnegative; zero for any dimension gives zero volume.
- The calculation finds geometric volume, not mass, capacity under a particular fill condition, or the volume of material in a hollow object.
What Volume Means
Volume describes three-dimensional extent. It is different from surface area, which measures the outside covering of an object in square units. A box can have a large surface area relative to its volume if it is thin, while a compact object can enclose substantial volume with comparatively less surface area.
Volume units are cubes of length units: cubic millimetres (mm3), cubic centimetres (cm3), cubic metres (m3), and so on. For example, 1 cm3 is the volume of a cube whose sides are each 1 cm. One cubic centimetre is also exactly 1 millilitre (mL), and 1,000 cm3 equals 1 L.
The word “solid” can refer either to a physical object or to a solid geometric shape. The formula depends on geometry, not on whether the material is wood, metal, or plastic. Density is needed to calculate mass from volume, but it is not needed to calculate volume from dimensions.
Choose the Formula for the Shape
The calculator above applies only to a rectangular prism, such as a brick, storage box, or room with square corners. Other shapes need different measurements and formulas. Common examples include:
- Cube: V = s3, where s is the edge length.
- Cylinder: V = πr2h, where r is the circular base’s radius and h is its perpendicular height.
- Sphere: V = (4/3)πr3, where r is the radius.
- Cone: V = (1/3)πr2h.
- Triangular prism: V = (1/2)bhL, where b and h describe the triangular cross-section and L is the prism’s length.
For a shape made from several simple parts, calculate each part’s volume and add them if the parts do not overlap. For a cutout or hollow section, subtract the void’s volume from the outer volume when its dimensions and shape are known. Irregular objects may be estimated from a suitable geometric model or measured by liquid displacement when the object can safely be submerged and does not absorb or react with the liquid.
Measurements, Units, and Accuracy
Measure perpendicular dimensions, and check that you are using the intended inside or outside dimensions. For a container, inside dimensions usually describe usable capacity; outside dimensions include wall thickness and therefore give a larger volume. A sloped or rounded container cannot be represented accurately by multiplying three maximum dimensions unless a rough bounding-box estimate is all that is needed.
Convert all measurements to one unit before multiplying. For example, a box 40 cm long, 20 cm wide, and 10 cm high has volume 8,000 cm3, which is 8 L. Equivalently, convert first to 0.4 m, 0.2 m, and 0.1 m: their product is 0.008 m3, also 8 L. Mixing 40 cm with 0.2 m without conversion produces a misleading result.
Small measurement errors can matter because three measurements are multiplied. If each dimension is approximate, the calculated volume is approximate too. Keep adequate precision while calculating, then round the final answer to match the least precise measurements or the practical purpose. Extra decimal places in a calculator display do not make rough measurements exact.
Capacity, Mass, and Common Mistakes
Geometric volume and container capacity are related but not always interchangeable. A container’s internal volume is its approximate capacity, but filling to the brim may not be practical, and a shape with rounded corners may not match a simple prism formula. Likewise, the volume of a solid object is not its mass. If density is known, mass can be calculated as mass = density × volume, with compatible units. For instance, a material with density 1,000 kg/m3 and volume 0.002 m3 has a calculated mass of 2 kg.
Frequent errors include using diameter where a circular formula requires radius, confusing square units with cubic units, using outside dimensions for internal capacity, or applying the rectangular-prism formula to a tapered or curved object. For a cylinder, the radius is half the diameter. For a non-rectangular object, identify its shape before choosing a formula rather than treating its largest length, width, and height as an exact description.
Frequently Asked Questions
How do you calculate the volume of a solid?
Identify the shape, measure the dimensions required by its formula, convert them to consistent units, and apply that formula. For a rectangular prism, multiply length by width by height.
What is the volume of a solid measured in?
Volume is measured in cubic units, such as cm3 or m3. Liquid capacity is often stated in millilitres or litres; 1 cm3 equals 1 mL and 1 m3 equals 1,000 L.
Is volume the same as capacity?
Not exactly. Volume describes the space occupied by a three-dimensional object or region. Capacity usually means how much a container can hold, typically based on its interior volume.
Can you find the volume of an irregular solid?
Sometimes. If it can be safely submerged without absorbing or reacting with the liquid, the rise in liquid level measures its displaced volume. Otherwise, use a geometric approximation, a 3D measurement method, or divide it into simpler shapes.
Does a solid’s volume tell you its weight?
No. Volume measures space, while mass measures the amount of matter and weight is a force. Density links volume and mass: mass equals density multiplied by volume. Weight also depends on gravitational acceleration.
Related
Formula used
in l | Length | m | 2 | 0 in w | Width | m | 1.5 | 0 in h | Height | m | 0.8 | 0 out v | Volume | m^3 | l * w * h | 4 out vl | Volume in litres | L | v * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s