molecalculator

Moles & Molar Mass

Potassium Melting Point: 63.5°C Explained

Calculator No. 01-12531 · Updated · Formula and assumptions shown below

Temperature in °F 146.3 °F
Difference from K melting point
0.0 °C
= Temperature − 63.5
Temperature
63.5 °C
Set in the form below
You enter
Temperature (°C)
You get
Temperature in °F (°F), Difference from K melting point (°C)
Rounding
1 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This page explains the melting point of potassium, the soft silvery metal with the symbol K. You enter a temperature in degrees Celsius or Fahrenheit, and the calculator converts it to the other scale and shows how it compares to potassium’s melting point of 63.5 °C (146.3 °F). The result tells you whether that temperature is above or below the point at which solid potassium turns into a liquid.

Formula

The conversion between Celsius and Fahrenheit uses the standard linear relationship:

°F = (°C × 9/5) + 32

where:

  • °C is the temperature in degrees Celsius (input, default 63.5 °C).
  • °F is the temperature in degrees Fahrenheit (output).
  • diff is the difference between the input temperature and potassium’s melting point, in °C (output). A positive value means the temperature is above the melting point; a negative value means it is below.

Potassium’s melting point is a fixed physical constant, 63.5 °C (146.3 °F). This is the temperature at which solid and liquid potassium are in equilibrium at standard atmospheric pressure.

Worked Example

Using the default input of 63.5 °C (potassium’s melting point itself):

  1. Convert to Fahrenheit: °F = 63.5 × 9/5 + 32 = 114.3 + 32 = 146.3 °F.
  2. Difference from melting point: 63.5 − 63.5 = 0.0 °C.

The calculator shows 146.3 °F and 0.0 °C difference, confirming that 63.5 °C is exactly the melting point.

Assumptions

  • The melting point is given at standard atmospheric pressure (1 atm).
  • The value 63.5 °C is the accepted value for pure potassium metal; impurities can shift the melting point slightly.
  • The Celsius-to-Fahrenheit conversion is exact by definition.

Why Potassium’s Melting Point Matters

Potassium is an alkali metal (Group 1 of the periodic table) with atomic number 19. Its melting point of 63.5 °C is unusually low for a metal—it melts just above the boiling point of water. This low melting point is a direct consequence of its electronic structure: each potassium atom has a single valence electron that is easily lost, leading to weak metallic bonding compared to transition metals. The atoms are held together by a “sea” of delocalized electrons, but the positive nuclei are relatively large and the electron density is low, so the lattice is easy to break apart with thermal energy.

In practical terms, this means potassium is a solid at room temperature but becomes a liquid on a hot summer day or in a warm laboratory. It is often stored under mineral oil to prevent reaction with moisture and oxygen, and the oil also keeps it from melting if the storage area gets warm. Knowing the melting point is essential for handling, storage, and any process that involves heating potassium, such as in sodium-potassium alloy (NaK) preparation.

How to Use the Melting Point in Real Life

The melting point is not just a trivia fact; it has practical implications:

  • Storage: Potassium must be kept below 63.5 °C to remain solid. In hot climates, storage areas may exceed this, so refrigeration or oil immersion is used.
  • Alloying: Sodium-potassium alloy (NaK) is liquid at room temperature. The melting point of the alloy depends on composition, but potassium’s low melting point is key to making NaK useful as a liquid metal coolant.
  • Reactivity: Molten potassium is extremely reactive and can ignite or explode on contact with water. Knowing the melting point helps in designing safe handling procedures.
  • Purification: Distillation or zone refining of potassium relies on its melting and boiling points to separate it from impurities.

If you are working with potassium in a lab, always check the temperature of your environment and equipment. The calculator above helps you quickly convert temperatures and see how close you are to the melting point.

Common Mistakes and Misconceptions

A frequent error is confusing potassium’s melting point with its boiling point (759 °C). They are very different—the metal must be heated far above the melting point to boil. Another misconception is that potassium is always solid at room temperature. In fact, on a hot day (above 35 °C, which is common in many regions), potassium can soften and even melt if left in direct sunlight. Also, some people think the melting point is the same as the “ignition temperature” in air; potassium ignites at around 400 °C in air, which is much higher than its melting point. The melting point is a phase change, not a combustion threshold.

When using the calculator, be careful with units. If you enter a temperature in Fahrenheit, you must convert it to Celsius first (the calculator expects °C). The difference output is in °C, so if you need it in °F, multiply by 9/5.

Safety Considerations with Potassium

Potassium is a highly reactive alkali metal. It reacts violently with water, releasing hydrogen gas and heat, which can cause explosions. It also reacts with oxygen in the air, forming potassium superoxide (KO2), which can be shock-sensitive. Therefore:

  • Always store potassium under mineral oil or in an inert atmosphere, away from moisture and air.
  • Wear appropriate personal protective equipment (PPE): safety goggles, face shield, and neoprene or nitrile gloves.
  • Never handle potassium with bare hands; the oil makes it slippery, and the metal can react with skin moisture.
  • If you need to melt potassium, do so in an inert atmosphere (e.g., argon) and in a controlled environment, following your lab’s safety protocol and the material safety data sheet (SDS).
  • Small pieces of potassium can be disposed of by controlled reaction with ethanol, but this should only be done by trained personnel.

This page is for educational and planning purposes only. Always follow your institution’s safety guidelines and the SDS for potassium.

Frequently Asked Questions

Is potassium’s melting point higher or lower than sodium’s?

Potassium’s melting point (63.5 °C) is lower than sodium’s (97.8 °C). This is a general trend down Group 1: as atoms get larger, the metallic bond weakens, so melting points decrease. Lithium melts at 180.5 °C, sodium at 97.8 °C, potassium at 63.5 °C, rubidium at 39.3 °C, and cesium at 28.5 °C.

Why does potassium melt at such a low temperature?

The low melting point is due to the weak metallic bonding. Each potassium atom has only one valence electron, and the large atomic radius means the positive nucleus is far from the “sea” of electrons. The attraction between the nuclei and electrons is relatively weak, so less thermal energy is needed to break the lattice.

What happens to potassium at its melting point?

At 63.5 °C, solid potassium transitions to liquid. The atoms gain enough kinetic energy to overcome the metallic bonds and flow past each other. The liquid is still metallic and conducts electricity, but it is more reactive because the surface area increases and the liquid can flow into crevices.

Does potassium melt in hot weather?

Yes, if the ambient temperature exceeds 63.5 °C (146.3 °F), which can occur in desert climates or in direct sunlight on dark surfaces. In such conditions, potassium stored improperly can melt and become more hazardous. This is why it is stored under oil and often refrigerated in hot climates.

What is the melting point of potassium in Fahrenheit?

Potassium’s melting point is 146.3 °F. This is calculated by converting 63.5 °C using the formula: (63.5 × 9/5) + 32 = 146.3 °F.

How does pressure affect potassium’s melting point?

Like most substances, potassium’s melting point changes with pressure. At higher pressures, the melting point typically increases slightly, but the effect is small for moderate pressure changes. The accepted value of 63.5 °C is at standard atmospheric pressure (1 atm).

Comparing Potassium to Other Metals

Potassium’s melting point is among the lowest of all metals. For context:

  • Mercury melts at −38.8 °C (it is liquid at room temperature).
  • Gallium melts at 29.8 °C (it can melt in your hand).
  • Cesium melts at 28.5 °C, slightly lower than potassium.
  • Iron melts at 1538 °C, far higher.

This low melting point makes potassium useful in applications where a liquid metal is needed at moderate temperatures, such as in NaK coolant for nuclear reactors or in specialized heat-transfer systems.

Alternatives to Melting: Other Phase Transitions

Besides melting, potassium can also sublime (go directly from solid to gas) under low pressure, but this is not common at standard conditions. The boiling point of potassium is 759 °C, which is much higher than its melting point. In vacuum systems, potassium can evaporate at lower temperatures, but for most practical purposes, melting is the relevant phase change.

If you need to work with potassium in a liquid state without melting the bulk metal, you might consider using a potassium alloy like NaK, which is liquid at room temperature. However, NaK is even more reactive and requires special handling.

Related

Formula used
in t | Temperature | °C | 63.5 | -273.15
out tf | Temperature in °F | °F | t * 9 / 5 + 32 | 1
out diff | Difference from K melting point | °C | t - 63.5 | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →