molecalculator

Moles & Molar Mass

Concentration Calculator: Formula and Worked Example

Calculator No. 01-3881 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator works out the molar concentration (molarity) of a solution from the mass of solute, its molar mass, and the final solution volume. Enter those three values to get concentration in mol/L and its equivalent in mM.

Formula

For a solution with a known solute mass, calculate molarity by converting the mass to moles and dividing by the final solution volume in liters:

c = (m / M) / (V / 1000)

  • c is concentration in mol/L, also written M.
  • m is the solute mass in grams.
  • M is the solute’s molar mass in grams per mole (g/mol).
  • V is the final solution volume in milliliters. Dividing by 1000 converts mL to L.

The conversion to millimolar is cmM = c × 1000, because 1 mol/L equals 1000 mmol/L, or 1000 mM. The calculator uses the standard mass-based relation n = m/M, where n is amount of substance in moles.

Worked Example

Using the calculator’s default values: 2.922 g of solute, molar mass 58.44 g/mol, and a final solution volume of 250 mL:

  1. Find the amount of solute: n = m/M = 2.922 g / 58.44 g/mol = 0.050000 mol.
  2. Convert the final volume to liters: 250 mL / 1000 = 0.25000 L.
  3. Divide moles by liters: c = 0.050000 mol / 0.25000 L = 0.2000 mol/L.
  4. Convert to millimolar: 0.2000 mol/L × 1000 = 200 mM.

The result is 0.2000 mol/L, or 200 mM, at the displayed precision.

Assumptions

  • The entered mass is the mass of the solute, and the molar mass matches the substance and chemical form being used.
  • The entered volume is the final volume of the solution, not the volume of solvent added.
  • The calculation reports analytical molarity: it does not account for dissociation, chemical reaction, purity, or non-ideal solution behavior.

What Concentration Means

Concentration describes how much of a specified substance is present in a stated amount of mixture or solution. It is not one single unit or formula. Molarity is common in chemistry because it expresses amount of substance per volume of solution. Other contexts use mass concentration, such as g/L, or composition measures such as mass percent and parts per million. Always identify which quantity and units are intended before calculating.

This calculator specifically finds molarity from mass and final volume. It is useful when preparing or checking a solution for a classroom problem or a laboratory calculation, provided the substance’s molar mass and the relevant measurement conventions are known. In bench work, follow your lab method, the safety data sheet (SDS) and your supervisor.

How to Use the Result

A value of 0.2000 mol/L means that each liter of the final solution contains 0.2000 moles of the specified solute, under the stated concentration convention. It does not mean there are 0.2000 moles in every container: the amount in a particular volume depends on that volume. For example, 100 mL of a 0.2000 mol/L solution contains 0.02000 mol, using n = cV with volume in liters.

The result describes the amount added or present according to the inputs. If a solute separates into ions, molarity of the original formula units is not automatically the same as the concentration of each ion. A separate stoichiometric calculation is needed to determine ion concentrations, and that calculation may depend on the reaction or degree of dissociation.

Common Mistakes and Limits

  • Using solvent volume instead of final solution volume. If a solution is specified as 250 mL, the formula needs the volume of the completed solution. The solvent initially used can be a different volume.
  • Mixing units. This calculator expects grams, g/mol, and milliliters. Entering a volume in liters as though it were milliliters changes the result by a factor of 1000. Convert units before entering values.
  • Choosing the wrong molar mass. A compound’s formula, hydration state, and chemical form affect its molar mass. Use the value corresponding to the actual solute, not a related substance.
  • Confusing molarity with mass concentration. Molarity is in mol/L; mass concentration is commonly in g/L. To convert between them, the correct molar mass is required.
  • Rounding too early. Keep extra digits during intermediate steps and round the final answer to a precision appropriate for the input measurements. More calculator digits do not make imprecise measurements more accurate.

The formula assumes the supplied values represent the solution being described. It does not correct for impurities, evaporation, temperature-dependent volume changes, or reactions during preparation. For concentrated or non-ideal solutions, measured behavior may not match simple ideal-solution assumptions; use the method and conventions required by the relevant coursework or laboratory protocol.

Frequently Asked Questions

What is the basic formula for concentration?
It depends on the concentration unit. For molarity, c = n/V, where n is moles of solute and V is the final solution volume in liters. If mass is given, calculate n as m/M first.

How do I calculate molarity from grams?
Divide the solute mass in grams by its molar mass in g/mol to find moles, then divide by the final solution volume in liters. If the volume is in milliliters, divide it by 1000 first.

Is molarity the same as concentration?
Molarity is one type of concentration, expressed in mol/L. Concentration can also be stated using other units, including g/L, percent, or a ratio, so the intended definition matters.

Why do I use final volume rather than solvent volume?
The denominator in molarity is the volume of the whole solution. Solute can change the total volume, so the amount of solvent used is not necessarily equal to the final solution volume.

How do I convert mol/L to mM?
Multiply mol/L by 1000. For instance, 0.200 mol/L equals 200 mM.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →