molecalculator

Moles & Molar Mass

Zinc Nitrate Melting Point: Facts & Data

Calculator No. 01-12521 · Updated · Formula and assumptions shown below

Molarity 0.3992 mol/L
Concentration in millimolar
399.24 mM
= Molarity × 1000
Mass of zinc nitrate (anhydrous)
18.9 g
Set in the form below
Molar mass (anhydrous)
189.36 g/mol
Set in the form below
You enter
Mass of zinc nitrate (anhydrous) (g), Molar mass (anhydrous) (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Zinc nitrate (Zn(NO₃)₂) melts at approximately 110 °C (230 °F) for the anhydrous form, but the commonly available hexahydrate (Zn(NO₃)₂·6H₂O) melts at about 36.4 °C (97.5 °F). The exact value depends on hydration state and heating rate, because the compound decomposes before a true boiling point is reached.

Formula

The calculator above computes the molarity of a zinc nitrate solution from mass, molar mass, and volume:

Molarity (mol/L) = mass (g) / (molar mass (g/mol) × volume (L))

Where:

  • m = mass of zinc nitrate (g)
  • mm = molar mass of the specific hydrate (g/mol) – for anhydrous Zn(NO₃)₂, 189.36 g/mol; for hexahydrate, 297.49 g/mol
  • v = final solution volume (mL, converted to L by dividing by 1000)
  • c = molarity (mol/L)

Worked Example

Using the defaults: 18.9 g of anhydrous zinc nitrate (molar mass 189.36 g/mol) is dissolved to make 250 mL of solution.

  1. Convert volume: 250 mL = 0.250 L
  2. Calculate moles: 18.9 g / 189.36 g/mol = 0.09981 mol
  3. Divide by volume: 0.09981 mol / 0.250 L = 0.3992 mol/L

So the molarity is 0.3992 M, which rounds to 0.3992 M (4 decimal places) or 399.2 mM.

Assumptions

  • The solute is pure and completely dissolves.
  • The molar mass used matches the hydrate form (anhydrous vs. hexahydrate).
  • Final volume is used, not solvent volume – the solute adds to the volume.
  • Temperature is 25 °C; molarity changes slightly with temperature due to expansion.

Background: What Is Zinc Nitrate?

Zinc nitrate is an inorganic compound with formula Zn(NO₃)₂. It appears as a white or colorless crystalline solid, often encountered as the hexahydrate. It is highly soluble in water and is used in laboratory synthesis, as a catalyst in organic reactions, in the production of other zinc salts, and in the preparation of zinc oxide nanoparticles. The melting point is not a single fixed number because the compound can exist in different hydrated forms, and heating often triggers decomposition rather than a clean phase change.

How Hydration Affects Melting Point

The most common commercial form is zinc nitrate hexahydrate, Zn(NO₃)₂·6H₂O. Its melting point is around 36.4 °C – close to human body temperature, so it can melt in your hand. The anhydrous form, which is less common and more hygroscopic, melts near 110 °C. However, when heated above about 105 °C, anhydrous zinc nitrate begins to decompose, releasing nitrogen oxides and leaving zinc oxide. Therefore, you never see a true boiling point; the compound breaks down before it boils.

How to Measure the Melting Point Correctly

To get a reliable melting point in the lab:

  • Use a finely ground, dry sample.
  • Use a capillary tube sealed at one end; fill to about 2–3 mm.
  • Heat slowly (1–2 °C per minute) near the expected melting point.
  • Record the temperature range from first liquid appearance to complete melting.
  • For hydrates, ensure the water content is known – use a fresh bottle and avoid exposure to air.

Always follow your lab method, the safety data sheet (SDS), and your supervisor.

Common Problems and Misconceptions

A frequent error is confusing the hexahydrate and anhydrous forms. A bottle labeled “zinc nitrate” might be either; check the formula on the label. Another misconception is that the melting point can be used to identify purity – in reality, decomposition and water loss often obscure the true melting point. Heating too quickly can cause the sample to decompose before melting, giving a false reading. Also, because the hexahydrate melts below room temperature on a warm day, it may appear as a wet slurry – that’s normal.

Safety and Handling

Zinc nitrate is an oxidizer and can intensify combustion. It is harmful if swallowed and causes serious eye irritation. Wear gloves and safety goggles, work in a fume hood, and avoid contact with combustible materials. Store in a cool, dry place away from reducing agents. When heating, be aware that decomposition releases toxic nitrogen dioxide fumes – do not inhale. Always consult the SDS for your specific form.

Frequently Asked Questions

Q: What is the melting point of zinc nitrate hexahydrate?
It melts at about 36.4 °C (97.5 °F). Because this is near room temperature, the solid may liquefy on a hot day.

Q: Does zinc nitrate have a boiling point?
No. It decomposes before boiling, releasing nitrogen oxides and leaving zinc oxide. Heating above ~105 °C decomposes the anhydrous form.

Q: Why does my zinc nitrate look wet?
It is likely the hexahydrate, which absorbs moisture and can melt at room temperature. Keep it tightly sealed in a dry environment.

Q: Can I use the melting point to check purity?
Not reliably. Impurities and water content shift the melting point, and decomposition can mask the true value. Use analytical methods like X-ray diffraction or titration.

Q: What is the molar mass of zinc nitrate?
Anhydrous Zn(NO₃)₂ is 189.36 g/mol; the hexahydrate is 297.49 g/mol. Always use the correct value for your calculations.

Q: Is zinc nitrate soluble in water?
Yes, it is highly soluble – about 120 g per 100 mL of water at 25 °C. The solution is acidic.

Related

Formula used
in m | Mass of zinc nitrate (anhydrous) | g | 18.9 | 0
in mm | Molar mass (anhydrous) | g/mol | 189.36 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →