Ammonium nitrate (NH4NO3) melts at 169.6 °C (337.3 °F) under standard atmospheric pressure. This value is for the pure, anhydrous crystalline solid; the presence of water or impurities lowers the melting point significantly. The melting point is a key physical property because it sits just above the temperature where ammonium nitrate begins to decompose, making controlled heating essential in any application.
Formula
The calculator above determines two things: the number of moles in a given mass of ammonium nitrate, and the sensible heat required to raise that mass from a starting temperature to the melting point (169.6 °C). The formulas are:
- Amount of substance: n = m / M, where m is mass in grams and M is molar mass in g/mol (for NH4NO3, M = 80.04 g/mol).
- Heat to melting point: Q = m × cp × (Tmelt − Tstart), where cp is the specific heat capacity of solid ammonium nitrate, approximately 1.66 J/(g·°C), Tmelt = 169.6 °C, and Tstart is the initial temperature in °C.
Note that this heat calculation assumes no phase change occurs and that the solid remains stable up to the melting point. In practice, decomposition becomes noticeable above ~170 °C, so the heat value is a theoretical minimum for reaching the melt.
Worked Example
Using the default values from the calculator (mass = 80.04 g, molar mass = 80.04 g/mol, starting temperature = 25 °C):
- Calculate moles: n = 80.04 g / 80.04 g/mol = 1.000 mol.
- Calculate heat: Q = 80.04 g × 1.66 J/(g·°C) × (169.6 − 25) °C = 80.04 × 1.66 × 144.6 = 19,200 J = 19.2 kJ (rounded to two decimal places).
The calculator shows 1.0000 mol and 19.20 kJ for these inputs.
Assumptions
- Pure, anhydrous ammonium nitrate (no water or additives).
- Standard atmospheric pressure (1 atm).
- Specific heat capacity is constant at 1.66 J/(g·°C) over the temperature range.
- No decomposition occurs before the melting point; this is a simplification for calculation purposes.
Why the Melting Point Matters
Ammonium nitrate is widely used as a nitrogen fertilizer (34-0-0) and, historically, as an explosive oxidizer. Its melting point is a critical parameter in both industries. In fertilizer production, molten ammonium nitrate is mixed with other nutrients or prilled (formed into small beads). Knowing the exact melting point allows manufacturers to keep the material just above 169.6 °C for flowability, but safely below the decomposition threshold. In the context of safety, the melting point is also the temperature above which the solid becomes a liquid that can be more easily absorbed into porous materials—this is a factor in some industrial accident scenarios, though the primary hazard is decomposition, not melting itself.
How Water and Impurities Change the Melting Point
Ammonium nitrate is extremely hygroscopic—it absorbs moisture from the air. Even small amounts of water dramatically lower the melting point. For example, a mixture with 5% water melts at around 100 °C, and with 20% water, the melting point drops to about 20 °C. This is why stored ammonium nitrate often forms a slush or solution at room temperature if not kept dry. Impurities such as ammonium sulfate or calcium nitrate also depress the melting point, a phenomenon known as melting point depression. In practice, technical-grade ammonium nitrate may melt anywhere from 150 °C to 169 °C depending on purity and moisture content.
Decomposition vs. Melting
One of the most common misunderstandings is that ammonium nitrate boils or decomposes at its melting point. In reality, pure ammonium nitrate begins to decompose slowly at temperatures just above 170 °C, releasing nitrous oxide and water vapor. The decomposition is exothermic (releases heat), which can lead to a runaway reaction if the material is confined or heated rapidly. Above 210 °C, decomposition becomes vigorous, and above 260 °C, it can become explosive under certain conditions. Therefore, the melting point (169.6 °C) is dangerously close to the onset of decomposition. This is why industrial processes that melt ammonium nitrate use careful temperature control and often operate under vacuum to lower the melting point further, or they add stabilizers.
Common Problems and Misconceptions
- “Ammonium nitrate melts at 170 °C”—This is a rounded approximation; the exact value is 169.6 °C, but many sources round to 170 °C. The difference is negligible for most purposes.
- “It boils at 210 °C”—Ammonium nitrate does not have a normal boiling point because it decomposes before boiling. The 210 °C figure often cited is the temperature at which decomposition becomes rapid, not a boiling point.
- “Melting it is safe if you are careful”—Melting pure ammonium nitrate in a laboratory requires strict temperature control and proper ventilation because decomposition gases (nitrous oxide, nitrogen oxides) are toxic. Always follow your lab method, the safety data sheet (SDS) and your supervisor.
- “The melting point is the same as the decomposition point”—No, they are distinct. Melting is a physical change; decomposition is a chemical change. They occur close together, but they are not the same.
Safety and Handling
Ammonium nitrate is an oxidizer, meaning it supports combustion. It is not flammable by itself, but it can cause other materials to burn more intensely. When heated above its melting point, it can decompose violently, especially if contaminated with organic materials, chlorides, or metal powders. Never heat ammonium nitrate in a closed container, as pressure from decomposition gases can cause an explosion. Always store it in a cool, dry, well-ventilated area away from combustible materials. In a laboratory, use a fume hood and a temperature-controlled heating bath. Do not attempt to melt large quantities without proper engineering controls.
Frequently Asked Questions
What is the exact melting point of ammonium nitrate?
The exact melting point of pure, anhydrous ammonium nitrate is 169.6 °C (337.3 °F) at standard pressure. This value is widely accepted in chemical handbooks.
Does ammonium nitrate melt or decompose first?
It melts first. Melting occurs at 169.6 °C, while significant decomposition starts around 170–200 °C. However, the two processes overlap slightly, so some decomposition may begin even as the last crystals melt.
Why does ammonium nitrate feel cold when dissolved in water?
Dissolving ammonium nitrate in water is an endothermic process—it absorbs heat from the surroundings. This is why instant cold packs use it. This is unrelated to melting; it is a dissolution process.
Can I melt ammonium nitrate in a kitchen oven?
No. Kitchen ovens are not designed for precise temperature control, and heating ammonium nitrate can release toxic gases or cause a fire. It should only be handled in a laboratory or industrial setting with proper safety equipment.
What is the melting point of ammonium nitrate solution?
A solution of ammonium nitrate in water has a lower melting point than the pure solid. For example, a 60% ammonium nitrate solution freezes at about -30 °C. The exact value depends on concentration.
Is the melting point the same for fertilizer-grade ammonium nitrate?
No. Fertilizer-grade ammonium nitrate contains additives (e.g., clay, coating agents) and may have residual moisture, which lowers the melting point. It can melt anywhere from 140 °C to 160 °C, depending on the formulation.
Related
Formula used
in m | Mass of ammonium nitrate | g | 80.04 | 0 in mm | Molar mass (NH4NO3) | g/mol | 80.04 | 0.001 in t | Temperature | °C | 25 | -273.15 out n | Amount of substance | mol | m / mm | 4 out heat | Heat to raise to melting point | kJ | m * 1.66 * (169.6 - t) / 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calcium Nitrate Boiling Point
- Cation Formula for Magnesium Nitrate0.0788 mol/L
- Potassium Nitrate Solubility in Water: Full Data25.9 g/100 mL
- Greenhouse Grade Potassium Nitrate: Uses & Rates0.2000 mol/L
- Molar Mass of KNO2: Formula & Calculation0.1373 mol/L
- Potassium Nitride Formula & How to Write It