The enthalpy of mixing (ΔHmix) is the heat absorbed or released when two or more substances are combined at constant pressure, and its formula is ΔHmix = Hsolution − (n₁H₁ + n₂H₂), where Hsolution is the enthalpy of the final mixture and n₁H₁ + n₂H₂ is the sum of the enthalpies of the pure components. In practice, you usually measure it calorimetrically as the heat change per mole of mixture, often expressed in kJ/mol or J/g. This page gives you the formula, a calculator for the common case of mixing two liquids, and the background you need to interpret the sign and magnitude of ΔHmix.
Formula
The general definition of the enthalpy of mixing for a binary system is:
ΔHmix = Hsolution − (n₁H̄₁ + n₂H̄₂)
where:
- ΔHmix = enthalpy of mixing (J or kJ)
- Hsolution = total enthalpy of the final homogeneous mixture (J or kJ)
- n₁, n₂ = amounts of components 1 and 2 (mol)
- H̄₁, H̄₂ = molar enthalpies of the pure components (J/mol or kJ/mol)
Because absolute enthalpies are not directly measurable, the formula is usually rewritten in terms of the enthalpy change per mole of mixture:
ΔHmix,m = x₁x₂Ω
where x₁ and x₂ are mole fractions and Ω is an interaction parameter that depends on the pair of substances and temperature. For an ideal solution, Ω = 0 and ΔHmix = 0.
Worked Example
Using the default values from the calculator: 1.0 mol of component 1 with a pure molar enthalpy of 10.0 kJ/mol, 1.0 mol of component 2 with a pure molar enthalpy of 20.0 kJ/mol, and a mixture molar enthalpy of 16.0 kJ/mol.
Step 1: Calculate the total enthalpy of the pure components.
n₁H̄₁ + n₂H̄₂ = (1.0 mol × 10.0 kJ/mol) + (1.0 mol × 20.0 kJ/mol) = 10.0 kJ + 20.0 kJ = 30.0 kJ
Step 2: Calculate the enthalpy of the mixture.
Hsolution = (n₁ + n₂) × Hmix,molar = (2.0 mol) × (16.0 kJ/mol) = 32.0 kJ
Step 3: Subtract.
ΔHmix = 32.0 kJ − 30.0 kJ = 2.0 kJ
Step 4: Per mole of mixture: 2.0 kJ / 2.0 mol = 1.0 kJ/mol.
The calculator returns 2.00 kJ and 1.000 kJ/mol, matching these steps.
Assumptions
- The process occurs at constant pressure (usually 1 atm or 1 bar).
- The mixture is homogeneous (a single phase) after mixing.
- The pure component enthalpies are evaluated at the same temperature and pressure as the mixture.
- The amounts are in moles; if you have masses, convert using molar masses first.
- The interaction parameter model (x₁x₂Ω) assumes a regular solution, which is a good approximation for many non-polar mixtures.
Why Enthalpy of Mixing Matters
When you mix two substances, the result can be endothermic (absorbs heat, ΔHmix > 0) or exothermic (releases heat, ΔHmix < 0). The sign tells you about the balance of intermolecular forces. For example, mixing ethanol and water is exothermic (ΔHmix ≈ −0.7 kJ/mol at some compositions) because hydrogen bonds form between the two different molecules that are stronger than the average of the pure interactions. In contrast, mixing acetone and carbon disulfide is endothermic because the new interactions are weaker than the original ones.
The magnitude is important in industrial processes: if you plan to dilute concentrated sulfuric acid with water, the heat released can be violent enough to boil the mixture, so you must add acid slowly to water. Knowing ΔHmix helps engineers design safe mixing vessels and cooling systems.
How to Measure or Estimate ΔHmix
There are two main routes:
- Calorimetry: Mix known amounts of the pure substances in an insulated calorimeter and measure the temperature change. The heat q = CcalΔT (with Ccal the calorimeter heat capacity) equals ΔHmix at constant pressure. This is the most direct method.
- From vapor pressures or solubility: If you have activity coefficient data, you can compute the excess Gibbs energy and then ΔHmix via the Gibbs–Helmholtz equation, but that requires data at multiple temperatures.
- Group contribution methods: For organic mixtures, methods like UNIFAC estimate activity coefficients, from which ΔHmix can be derived, but they are approximate.
For a quick estimate, the regular solution model gives ΔHmix ≈ Vm x₁x₂ (δ₁ − δ₂)², where δ is the Hildebrand solubility parameter and Vm is the molar volume of the mixture. This always predicts endothermic mixing (positive ΔHmix), which is true for many non-polar mixtures but fails when specific interactions like hydrogen bonding occur.
Common Mistakes and Misconceptions
- Confusing enthalpy with internal energy: ΔH = ΔU + PΔV. For liquids and solids, the PΔV term is tiny, so ΔH ≈ ΔU, but for gases it can be significant. The formula here is for condensed phases.
- Using masses instead of moles: The formula requires molar amounts. If you have grams, divide by molar mass first. For example, 18 g of water = 1 mol.
- Ignoring the temperature dependence: ΔHmix changes with temperature because heat capacities of the components differ. A value measured at 25 °C is not exactly valid at 50 °C.
- Assuming ΔHmix = 0 for all mixtures: Only ideal solutions have zero enthalpy of mixing. Most real mixtures deviate.
- Sign confusion: A negative ΔHmix means heat is released (exothermic); a positive value means heat is absorbed (endothermic).
How to Use the Calculator
This calculator computes ΔHmix from the molar enthalpies of the pure components and the mixture. You need to know or estimate those enthalpies. For pure substances, molar enthalpy values are available in thermodynamic tables (e.g., NIST WebBook) at your reference temperature. For the mixture, you can estimate it from the weighted average of pure enthalpies plus an excess term, or measure it calorimetrically.
Enter the amounts in moles, the pure molar enthalpies in kJ/mol, and the mixture molar enthalpy in kJ/mol. The calculator returns the total ΔH in kJ and the per-mole value. If you only have masses, convert to moles using molar masses before entering.
For example, to find the heat released when mixing 2 mol of water (pure enthalpy −285.83 kJ/mol) with 1 mol of ethanol (pure enthalpy −277.69 kJ/mol) to form a mixture with an enthalpy of −560.0 kJ/mol, enter those numbers. The calculator will give a negative ΔH, indicating exothermic mixing.
Safety and Practical Limits
When working with real chemicals, always follow your lab method, the safety data sheet (SDS), and your supervisor. The enthalpy of mixing can be large: mixing 1 L of water with 1 L of concentrated sulfuric acid can raise the temperature above 100 °C, causing violent boiling and splashing. Always add acid to water slowly with stirring and cooling. For endothermic mixtures, the temperature drops, which can cause condensation or freezing if the mixture is near its freezing point.
The calculator assumes ideal behavior of the inputs (pure enthalpies are constants), but real mixtures have excess enthalpies that vary with composition. The result is only as good as the enthalpy values you input. For precise work, use experimental data from the literature.
Frequently Asked Questions
What is the enthalpy of mixing for an ideal solution?
For an ideal solution, ΔHmix = 0. This is because the intermolecular forces between unlike molecules are identical to those between like molecules, so no net energy change occurs on mixing. Ideal solutions are rare; they occur for closely related compounds, such as benzene and toluene.
How do I calculate ΔHmix from heat of solution?
The integral heat of solution is the heat change when one mole of solute dissolves in a given amount of solvent. The enthalpy of mixing is the same concept but for any proportions. If you have the heat of solution at infinite dilution, that is the enthalpy of mixing for that composition. To get ΔHmix per mole of mixture, divide the heat by the total moles of solute and solvent.
Why is enthalpy of mixing sometimes positive and sometimes negative?
The sign depends on the balance of intermolecular forces. If the new interactions between different molecules are stronger than the average of the pure interactions, energy is released (negative ΔHmix). If they are weaker, energy is absorbed (positive ΔHmix). For example, water–ethanol has negative ΔHmix due to hydrogen bonding, while cyclohexane–carbon tetrachloride has positive ΔHmix.
Does enthalpy of mixing depend on pressure?
For condensed phases (liquids and solids), the pressure dependence is very small and usually neglected. For gases, the enthalpy of mixing can depend on pressure if the gas is non-ideal, but at low pressures it approaches zero for ideal gas mixtures.
What is the difference between enthalpy of mixing and entropy of mixing?
Enthalpy of mixing (ΔHmix) is the heat change, while entropy of mixing (ΔSmix) is the change in disorder. For an ideal solution, ΔHmix = 0 but ΔSmix > 0, which drives mixing. The Gibbs free energy of mixing is ΔGmix = ΔHmix − TΔSmix. A negative ΔGmix means mixing is spontaneous, even if ΔHmix is positive, as long as the entropy term dominates.
Can I use this calculator for alloys or polymers?
Yes, the formula applies to any mixture, but you need molar amounts and molar enthalpies. For alloys, you often use per-atom enthalpies; for polymers, you use per-mole of repeat unit. The regular solution model works for many alloys, but polymer mixing often involves large entropy effects.
Related
Formula used
in m1 | Amount of component 1 | mol | 1.0 | 0 in m2 | Amount of component 2 | mol | 1.0 | 0 in h1 | Molar enthalpy of pure 1 | kJ/mol | 10.0 | -1000 in h2 | Molar enthalpy of pure 2 | kJ/mol | 20.0 | -1000 in hmix | Molar enthalpy of mixture | kJ/mol | 16.0 | -1000 out dh | Enthalpy of mixing | kJ | m1*h1 + m2*h2 - (m1+m2)*hmix | 2 out dhm | ΔH per mole of mixture | kJ/mol | (m1*h1 + m2*h2 - (m1+m2)*hmix)/(m1+m2) | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- How to Find the Continuous Decay Rate
- Total Constant of Decay: How to Calculate It0.000121 1/s
- How to Calculate Decay Constant0.000121 1/s
- Half Life GitHub: What It Is and How to Use It
- Decay Constant: How to Calculate It0.000121 1/s
- Half-Life Games in Order: Full Release Timeline