molecalculator

Moles & Molar Mass

Total Constant of Decay: How to Calculate It

Calculator No. 01-7067 · Updated · Formula and assumptions shown below

Decay constant (λ) 0.000121 1/s
Mean lifetime (τ)
8,266.643 s
= 1 ÷ Decay constant (λ)
Half-life
5730 s
Set in the form below
You enter
Half-life (s)
You get
Decay constant (λ) (1/s), Mean lifetime (τ) (s)
Rounding
6 dp · 3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This guide shows you how to calculate the total constant of decay (often called the decay constant, λ) for a radioactive substance. You input the half-life, and the calculator returns the decay constant in reciprocal time units, which describes the probability per unit time that a nucleus will decay. You’ll also see the mean lifetime, which is the average time a nucleus survives before decaying.

Formula

The total constant of decay (λ) is defined by the radioactive decay law. The number of undecayed nuclei N at time t is given by:

N(t) = N₀ · e−λt

where N₀ is the initial number of nuclei, and e is Euler’s number (≈ 2.71828). The decay constant λ is the probability per unit time that a given nucleus will decay. It is related to the half-life (t₁/₂) by:

λ = ln(2) / t₁/₂

Here, ln(2) is the natural logarithm of 2 (≈ 0.693147). The mean lifetime τ (tau) is the reciprocal of the decay constant:

τ = 1 / λ = t₁/₂ / ln(2)

Variables:

  • λ – decay constant (units: 1/s, 1/min, 1/h, etc.)
  • t₁/₂ – half-life (units: s, min, h, years, etc.)
  • τ – mean lifetime (same time units as t₁/₂)
  • N₀ – initial number of nuclei (dimensionless count)
  • N(t) – number of nuclei at time t

Worked Example

Let’s calculate the decay constant for carbon-14, which has a half-life of 5,730 years. The calculator defaults use seconds, but we’ll work in years for clarity.

Step 1: Write down the half-life.

t₁/₂ = 5730 years

Step 2: Apply the formula λ = ln(2) / t₁/₂.

λ = 0.693147 / 5730

Step 3: Divide.

λ ≈ 0.000120968 1/year

Step 4: Express in scientific notation.

λ ≈ 1.20968 × 10−4 per year

Step 5: Calculate the mean lifetime.

τ = 1 / λ = 5730 / 0.693147 ≈ 8267 years

So for carbon-14, the decay constant is about 1.21 × 10−4 per year, and the mean lifetime is about 8,270 years.

Assumptions

  • The decay follows first-order kinetics (exponential decay).
  • The half-life is constant over time and does not depend on temperature, pressure, or chemical state.
  • The sample is large enough that statistical fluctuations are negligible.

When to Use This Calculation

You need the total constant of decay when you want to:

  • Calculate the activity (decays per second) of a sample using A = λN.
  • Determine how long a sample will take to reach a certain activity.
  • Compare the decay rates of different isotopes.
  • Use the decay law in radiometric dating or nuclear physics problems.

The decay constant is a fundamental property of each radioactive isotope. It tells you how quickly a substance undergoes radioactive decay. A larger λ means a shorter half-life and a more rapidly decaying substance.

How to Read the Result

The decay constant is expressed in reciprocal time units. If you input the half-life in seconds, the decay constant is in 1/s (or s−1). This number represents the probability per second that a single nucleus will decay. For example, a decay constant of 0.01 s−1 means each nucleus has a 1% chance of decaying in the next second.

The mean lifetime τ is the average time a nucleus exists before decaying. It is longer than the half-life by a factor of 1/ln(2) ≈ 1.443. For a large sample, after one mean lifetime, about 63.2% of the original nuclei have decayed, leaving 36.8%.

Common Mistakes

  • Unit mismatch: Using half-life in years but then using the decay constant in seconds without converting. Always keep units consistent.
  • Forgetting ln(2): Some people mistakenly use λ = 1/t₁/₂. That gives the mean lifetime, not the decay constant.
  • Confusing half-life and mean lifetime: They are different. Half-life is the time for half to decay; mean lifetime is the average survival time.
  • Rounding too early: If you round ln(2) to 0.693 too early, you may lose precision in the final answer.

Tips

  • Always convert the half-life to the desired time unit before calculating λ. For example, if you want λ in per second, convert years to seconds first (1 year ≈ 3.156 × 107 s).
  • Use the natural logarithm function (ln) on your calculator, not log base 10.
  • When doing multi-step problems, keep intermediate values with many significant figures to avoid rounding errors.
  • Check your answer: if the half-life is 10 seconds, λ should be about 0.0693 s−1. If you get 0.1, you’ve likely used the wrong formula.

Troubleshooting

My decay constant seems too large or too small. Check the units. If you entered the half-life in years but expected the decay constant in per second, you need to convert years to seconds first. For example, 5730 years = 5730 × 3.156 × 107 s ≈ 1.808 × 1011 s. Then λ = 0.693 / 1.808e11 ≈ 3.83 × 10−12 s−1.

My calculator gives an error. Make sure you are using the natural logarithm function, not the common log. Also, ensure the half-life is positive.

I get a negative decay constant. The decay constant must be positive. If you get a negative number, you probably entered a negative half-life. Check your input.

I’m not sure which formula to use. If you have the half-life, use λ = ln(2)/t₁/₂. If you have the mean lifetime, use λ = 1/τ. If you have the activity (A) and the number of nuclei (N), use λ = A/N.

Frequently Asked Questions

1. What is the difference between decay constant and half-life? The half-life is the time required for half of the radioactive nuclei to decay. The decay constant is the probability per unit time that a nucleus will decay. They are inversely related: a short half-life means a large decay constant.

2. Can the decay constant change with temperature or pressure? For most radioactive decays, the decay constant is independent of external conditions. However, for electron capture decay, extremely high temperatures or pressures can slightly alter the decay rate, but this is negligible in most practical situations.

3. How do I convert half-life from years to seconds? Multiply the number of years by 365.25 days/year, then by 24 hours/day, then by 3600 seconds/hour. For example, 1 year ≈ 3.156 × 107 seconds.

4. Why is the mean lifetime longer than the half-life? Because the decay exponential has a long tail. Some nuclei survive much longer than the half-life, pulling the average up. The mean lifetime is about 1.443 times the half-life.

5. What is the unit of the decay constant? It is reciprocal time, such as s−1, min−1, or year−1. It is not dimensionless.

6. Can I use this for non-radioactive decay? The same mathematical formalism applies to any first-order process, such as chemical reactions that follow first-order kinetics or the discharge of a capacitor. But the term “decay constant” is most commonly used in nuclear physics.

Related

Formula used
in t12 | Half-life | s | 5730 | 0
out lam | Decay constant (λ) | 1/s | ln(2) / t12 | 6
out tau | Mean lifetime (τ) | s | 1 / lam | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →