This guide shows you how to calculate the decay constant (λ) for a radioactive isotope or any exponential decay process. You enter the half-life (or the initial and remaining quantity over a known time), and you get the decay constant in reciprocal time units, which tells you the probability per unit time that a nucleus decays.
Formula
The decay constant is the proportionality constant in the radioactive decay law:
N(t) = N₀ · e−λt
where:
- N(t) = quantity remaining after time t
- N₀ = initial quantity
- λ = decay constant (units: 1/time, e.g., s⁻¹, min⁻¹, yr⁻¹)
- t = elapsed time (same time unit as λ)
When the half-life (t₁/₂) is known, the decay constant is:
λ = ln(2) / t₁/₂
Here, ln(2) ≈ 0.693147. The half-life must be in the same time unit you want for λ. For example, if half-life is in seconds, λ will be in s⁻¹.
Worked Example
Carbon-14 has a half-life of 5,730 years. To find its decay constant in yr⁻¹:
- Write the formula: λ = ln(2) / t₁/₂
- Plug in the half-life: λ = 0.693147 / 5,730 yr
- Calculate: λ ≈ 0.000120968 yr⁻¹
- So the decay constant is about 1.21 × 10⁻⁴ yr⁻¹.
The calculator above gives 0.000121 (rounded to 6 decimals) for the same values.
Assumptions
- The decay follows first-order kinetics (exponential decay).
- The half-life is constant over time (no changes in conditions).
- You are using the same time unit for half-life and decay constant.
When to Use This
Use the decay constant when you need to calculate activity, predict remaining quantity, or compare decay rates. It appears in the decay law, activity (A = λN), and mean lifetime (τ = 1/λ). It is useful in radiometric dating, nuclear physics, and also in non-radioactive processes like drug elimination (though that is beyond this page’s scope).
Common Mistakes
- Unit mismatch: Using a half-life in years but wanting λ in s⁻¹ without converting. Always convert time to the desired unit first.
- Using log base 10 instead of natural log: The formula uses ln (natural log), not log₁₀. ln(2) ≈ 0.693, not 0.301.
- Confusing half-life with mean lifetime: τ = 1/λ, which is about 1.443 times the half-life. They are not the same.
- Forgetting that λ is positive: The decay constant is positive; the minus sign in the exponent makes the quantity decrease.
Tips
- Always write the unit of λ explicitly (e.g., s⁻¹, yr⁻¹) to avoid confusion.
- If you have initial and remaining amounts and time, use λ = (1/t) · ln(N₀/N(t)) instead of using half-life.
- For very long half-lives, use scientific notation to keep numbers manageable.
- Check your answer: a longer half-life gives a smaller decay constant, and vice versa.
Troubleshooting
- Result seems too large or too small: Check the time unit. If half-life is in years and you want s⁻¹, convert years to seconds (1 yr ≈ 3.156 × 10⁷ s) first.
- Calculator shows “Cannot compute”: Ensure the half-life is positive (greater than 0). The calculator rejects zero or negative inputs.
- You get a negative λ: That is impossible for decay; you likely used the wrong formula or sign. Recompute using ln(2)/t₁/₂.
- Need λ in different units: Convert the half-life to that unit before dividing, or convert λ after (e.g., multiply by 3.156 × 10⁷ to go from yr⁻¹ to s⁻¹).
Frequently Asked Questions
What is the decay constant in simple terms?
It is the probability per unit time that a single nucleus will decay. A higher λ means faster decay.
How is decay constant different from half-life?
Half-life is the time for half the sample to decay, while decay constant is the rate constant. They are inversely related: λ = ln(2)/t₁/₂.
Can I use this for non-radioactive decay?
Yes, any process that follows exponential decay (e.g., capacitor discharge, light absorption) can use the same formula, as long as the rate is proportional to the remaining quantity.
What are the units of decay constant?
Reciprocal time: s⁻¹, min⁻¹, hr⁻¹, yr⁻¹, etc. Choose the unit that matches your time input.
Why is ln(2) used in the formula?
Because after one half-life, N(t) = N₀/2. Substituting into the decay law gives e^(−λt₁/₂) = 1/2, so λt₁/₂ = ln(2).
How do I find decay constant from activity?
If you know activity (A) and number of atoms (N), use λ = A/N. Ensure activity is in decays per second (Bq) and N is the number of undecayed nuclei.
Related
Formula used
in t12 | Half-life | s | 5730 | 0 out lam | Decay constant | 1/s | ln(2) / t12 | 6 out tau | Mean lifetime | s | 1 / lam | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- How to Find the Continuous Decay Rate
- Total Constant of Decay: How to Calculate It0.000121 1/s
- Half Life GitHub: What It Is and How to Use It
- Decay Constant: How to Calculate It0.000121 1/s
- Half-Life Games in Order: Full Release Timeline
- Half-Life Free Play: How to Play for Free0.2000 mol/L