molecalculator

Moles & Molar Mass

Half Life GitHub: What It Is and How to Use It

Calculator No. 01-7063 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

“Half life github” most commonly refers to GitHub repositories that provide code for calculating the half-life of a radioactive substance, or that implement the half-life equation in a programming language. These repositories are typically small, open-source tools or libraries that take inputs like initial quantity, decay constant, or elapsed time and return the half-life, remaining quantity, or decay rate. This article explains what these tools do, how the half-life formula works, how to choose a repository, and common pitfalls when using them.

Formula

The half-life equation describes exponential decay: N(t) = N₀ × (1/2)^(t / t½), where:

  • N(t) = quantity remaining after time t (same unit as N₀)
  • N₀ = initial quantity (g, mg, Bq, mol, etc.)
  • t = elapsed time (must match the unit of t½)
  • t½ = half-life (time unit, e.g., hours, years)

The decay constant λ is related by λ = ln(2) / t½. The calculator above uses the same formula, with the half-life and elapsed time both in hours by default. You can change the units as long as both times share the same unit.

Worked Example

Using the default values: half-life t½ = 12.3 h, initial quantity N₀ = 100 g, elapsed time t = 24.6 h.

  1. Calculate the exponent: t / t½ = 24.6 / 12.3 = 2.0000
  2. Compute (1/2)^2 = 0.25
  3. Remaining quantity N = 100 × 0.25 = 25 g
  4. Fraction remaining = 0.25 (25%)
  5. Decay constant λ = ln(2) / 12.3 = 0.693147 / 12.3 ≈ 0.05635 h⁻¹

The calculator shows 25 g remaining, 0.25 fraction, and λ ≈ 0.056350 1/h.

Assumptions

  • Decay is a first-order exponential process (true for radioactive isotopes).
  • The half-life is constant over time (does not change with temperature, pressure, or chemical state).
  • No new atoms of the isotope are being produced during the decay.
  • Units of t and t½ are the same; if not, convert first.

What You’ll Find on GitHub

Searching “half life” on GitHub returns several types of repositories:

  • Simple command-line scripts in Python, JavaScript, or R that ask for inputs and print the half-life or remaining mass.
  • Library functions that you can import into your own code, e.g., a Python function half_life(initial, decay_constant).
  • Educational notebooks (Jupyter or Observable) that plot decay curves and explain the math.
  • Physics simulation projects that model decay chains or use Monte Carlo methods.

Most are open-source under MIT or GPL licenses, so you can read the source and adapt it. However, quality varies: some are homework assignments, others are production-ready. Always check the README, the last commit date, and whether tests are included.

How to Choose a Repository

When evaluating a half-life GitHub repo, consider these factors:

  • Language – pick one you can run or modify (Python is the most common).
  • Documentation – does the README explain the formula and the input units?
  • License – if you plan to use it commercially, avoid GPL unless you’re okay sharing your code.
  • Maintenance – a repo with recent commits and open issues is more reliable.
  • Accuracy – check the code against a known example (like the one above) before trusting it.

If you only need a quick calculation, the built-in calculator on this page is simpler and avoids dependency issues.

Common Problems and Misconceptions

A frequent mistake is mixing time units: entering half-life in years and elapsed time in days without conversion. Another is confusing half-life with mean lifetime (τ = 1/λ = t½ / ln(2)). Some GitHub scripts use a decay constant input instead of half-life; make sure you know which one the function expects. Also, the formula assumes the decay is purely exponential; for a mixture of isotopes, you need a sum of exponentials, not a single half-life.

Another misconception is that half-life means “half the atoms decay in that time” – that is true, but it doesn’t mean all atoms decay after two half-lives. After two half-lives, 75% has decayed, not 100%. The calculator above correctly shows 25% remaining after two half-lives.

Comparison: GitHub Scripts vs. Online Calculators

GitHub scripts offer flexibility: you can batch-process data, integrate with other code, or modify the formula for decay chains. Online calculators like the one on this page are faster for single values and require no setup. For learning, reading a well-commented GitHub script is excellent; for a quick answer, use a calculator. If you need to handle uncertainty or multiple isotopes, a dedicated scientific library like SciPy (with its curve_fit) is more appropriate than a simple half-life function.

Cost and Safety

All public GitHub repositories are free to use, though you should respect the license. There is no cost to download or run the code. In terms of safety, these tools are purely mathematical – they don’t involve radioactive materials. However, if you are working with actual radioactive substances in a lab, follow your institution’s safety protocols, the safety data sheet (SDS), and your supervisor’s guidance. The math only predicts quantities; it does not protect you from radiation exposure.

Frequently Asked Questions

What is the half-life formula? The most common form is N(t) = N₀ × (1/2)^(t/t½). You can also write it as N(t) = N₀ × e^(−λt), where λ = ln(2)/t½.

How do I calculate half-life from the decay constant? Use t½ = ln(2) / λ. For example, if λ = 0.05635 h⁻¹, then t½ = 0.693147 / 0.05635 ≈ 12.3 hours.

Can I use a half-life GitHub script for medical doses? No. These scripts are for educational and general physics use. Do not use them for medication dosing, radiopharmaceutical therapy, or any clinical application. Always consult a qualified medical professional.

Why does my GitHub script give a different answer than this calculator? Likely because of unit mismatch (e.g., half-life in days vs. seconds) or because the script expects the decay constant instead of the half-life. Check the input definitions in the code.

What if I have a decay chain (A → B → C)? A single half-life formula only works for one isotope. For a chain, you need a system of differential equations (Bateman equations) – many GitHub repos handle that, but they are more complex.

Is there a built-in half-life function in Python? Not in the standard library, but you can write one in three lines: def remaining(N0, t, t_half): return N0 * 0.5**(t/t_half). Many repos provide similar code.

Related

Formula used
in t | Half-life (t½) | h | 12.3 | 0
in a | Initial quantity | g | 100 | 0
in e | Elapsed time | h | 24.6 | 0
out r | Remaining quantity | g | a * (0.5)^(e / t) | 4
out f | Fraction remaining | - | (0.5)^(e / t) | 4
out d | Decay constant (λ) | 1/h | ln(2) / t | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →