molecalculator

Moles & Molar Mass

Gas Pressure Measurement Units Explained

Calculator No. 01-12393 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Gas pressure is measured in units of force per area, with the SI unit being the pascal (Pa), equal to one newton per square meter. This article explains the common units—pascal, bar, atmosphere, torr, and pounds per square inch—how they relate, and how to choose and convert between them for practical work.

Formula

The conversion between pressure units is based on the definition of each unit in terms of pascals (Pa). The calculator takes a numeric pressure value and a selected unit, then multiplies by the conversion factor to get pascals. From pascals, it divides by the number of pascals in each target unit:

  • 1 kPa = 1000 Pa
  • 1 bar = 100,000 Pa
  • 1 atm = 101,325 Pa (exact, by definition)
  • 1 torr = 101,325 / 760 Pa ≈ 133.322 Pa
  • 1 psi = 6894.757 Pa (exact, based on the pound-force and inch definitions)

So, for example, to convert from atm to kPa: value in kPa = value in atm × 101.325.

Worked Example

Using the default values: enter 1 and select “atm”. The calculator first converts to pascals:

1 atm × 101,325 Pa/atm = 101,325 Pa

Then it converts to each unit:

  • kPa: 101,325 / 1000 = 101.325 kPa
  • bar: 101,325 / 100,000 = 1.01325 bar
  • atm: 101,325 / 101,325 = 1 atm
  • torr: 101,325 / 133.322 = 760.00 torr
  • psi: 101,325 / 6894.76 = 14.696 psi

These are the standard equivalents for 1 standard atmosphere.

Assumptions

  • All conversions use the exact definitions: 1 atm = 101,325 Pa, 1 torr = 1/760 atm, 1 psi = 6894.757 Pa.
  • The calculator assumes the input is a positive pressure value; it does not handle negative gauge pressures (vacuum) or absolute/relative distinctions automatically.
  • No temperature or gas composition is involved—pressure unit conversion is purely a matter of unit definitions.

Why So Many Units?

Pressure units arose from different fields and practical needs. The pascal is the SI unit, named after Blaise Pascal, and is used in physics and engineering for its consistency with other SI units. The bar (from Greek “baros,” weight) is close to atmospheric pressure and is common in meteorology and industrial applications. The atmosphere (atm) was originally defined as the average sea-level air pressure, and is still used in chemistry for gas law calculations. The torr (named after Evangelista Torricelli) is essentially the millimeter of mercury (mmHg), which came from barometers. The pound per square inch (psi) is used in the United States for tires, scuba tanks, and many engineering fields. Each unit persists because it is convenient in its context—for example, a tire gauge reads 30 psi, not 206,842 Pa.

How to Choose the Right Unit

Your choice of unit depends on the field and the magnitude of the pressure:

  • Physics/SI: Use pascals or kilopascals for calculations involving other SI units (e.g., ideal gas law with R = 8.314 J/(mol·K)).
  • Chemistry: Atmospheres are common in gas law problems because R = 0.08206 L·atm/(mol·K) is memorable. Torr is used when measuring with a mercury manometer.
  • Engineering: Bar is common in Europe and in high-pressure systems; psi is standard in US engineering and everyday measurements.
  • Meteorology: Hectopascals (hPa, equal to 1 millibar) are used for weather maps.

When in doubt, convert to pascals or kilopascals to avoid errors in unit cancellation.

Common Mistakes and Misconceptions

A frequent error is confusing gauge pressure and absolute pressure. Gauge pressure is measured relative to ambient atmospheric pressure, so a tire at 30 psi gauge is actually about 44.7 psi absolute (30 + 14.7). Absolute pressure is used in gas laws; gauge pressure is used in most pressure gauges. Another mistake is mixing up torr and mmHg—they are essentially identical (1 torr = 1 mmHg at 0 °C and standard gravity), but the torr is defined as 1/760 of an atmosphere, while mmHg depends on the density of mercury, so they differ by about 1 part in 10 million. Also, the bar is sometimes rounded to 1 atm, but 1 bar is 0.9869 atm, a 1.3% difference that matters in precise work.

Practical Applications and Safety

Understanding pressure units is critical in many real-world settings:

  • Scuba diving: Tank pressure is often read in psi or bar; knowing the absolute pressure is essential for calculating air consumption at depth.
  • Medical oxygen: Cylinders are filled to about 2000 psi (138 bar); regulators reduce it to delivery pressure. Always check the gauge in the correct unit.
  • HVAC: Refrigerant pressures are measured in psi or bar; using the wrong unit can lead to overcharging or undercharging a system, which is dangerous.
  • Laboratory gas lines: Many instruments require a specific inlet pressure, often given in kPa or bar; exceeding the limit can damage equipment.

When working with pressurized gas, always follow the equipment manufacturer’s specifications and the safety data sheet (SDS). Never exceed the rated pressure of a vessel or regulator, and use a pressure relief device where required.

Frequently Asked Questions

What is the difference between psi and psig? psi is a unit of pressure, but psig (pounds per square inch gauge) indicates gauge pressure, which is the pressure above atmospheric. For example, a tire at 32 psig has an absolute pressure of about 46.7 psia (pounds per square inch absolute). Always note whether a reading is gauge or absolute.

How many torr are in one atmosphere? Exactly 760 torr, by definition. This comes from the original definition of the torr as 1/760 of a standard atmosphere. In practice, 1 torr is equal to 1 mmHg at 0 °C, so a standard barometer reads 760 mmHg.

Is bar the same as atm? Not exactly. 1 bar is 100,000 Pa, while 1 atm is 101,325 Pa. So 1 bar is about 0.9869 atm. The difference is about 1.3%, which is why they are often used interchangeably in rough work, but not in precise calculations.

Why is pascal so small? The pascal is defined as one newton per square meter. A newton is about the weight of a small apple, and a square meter is a large area, so 1 Pa is a very small pressure. For example, a sheet of paper exerts about 1 Pa on a table. That’s why we often use kilopascals (kPa) or megapascals (MPa) in practice.

How do I convert psi to kPa quickly? Multiply the psi value by 6.89476 to get kPa. For a rough estimate, multiply by 7. For example, 30 psi × 6.89476 ≈ 206.8 kPa. Conversely, divide kPa by 6.89476 to get psi.

What is the standard pressure used in gas law calculations? The standard pressure is 1 atm, which equals 101.325 kPa, 760 torr, or 14.696 psi. In the ideal gas law, you must use pressure in the same unit as the gas constant R. If you use R = 0.08206 L·atm/(mol·K), pressure must be in atm; if you use R = 8.314 J/(mol·K), pressure must be in pascals.

Related

Formula used
in v | Pressure value | - | 1 | 0
sel u | Input unit | Pa=1, kPa=0.001, bar=0.00001, atm=0.00000986923, torr=0.00750062, psi=0.000145038
out pa | Pressure in pascals | Pa | v * u | 2
out kpa | Pressure in kilopascals | kPa | pa / 1000 | 3
out bar | Pressure in bar | bar | pa / 100000 | 5
out atm | Pressure in atmospheres | atm | pa / 101325 | 5
out torr | Pressure in torr (mmHg) | torr | pa / 133.322 | 2
out psi | Pressure in psi | psi | pa / 6894.76 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →