This calculator works out the remaining quantity of a radioactive substance after a given time, using its half-life. You enter the initial amount, the half-life, and the elapsed time, and it returns the amount left, along with the fraction remaining. The calculation is based on the standard exponential decay equation N(t) = N₀ × (1/2)^(t/t½).
Formula
The half-life formula describes exponential decay: N(t) = N₀ × (1/2)^(t / t½), where:
- N(t) = remaining amount after time t (in grams, moles, or any unit of quantity)
- N₀ = initial amount (same unit as N(t))
- t = elapsed time (in seconds, minutes, hours, etc., consistent with t½)
- t½ = half-life (same time unit as t)
This formula works for any radioactive isotope, and also for other processes that follow first-order kinetics, such as certain chemical reactions and drug elimination (though the calculator here is for general decay).
Worked Example
Using the default values: initial amount N₀ = 100 g, half-life t½ = 10 s, elapsed time t = 30 s.
Step 1: Compute the exponent: t / t½ = 30 / 10 = 3.
Step 2: Compute (1/2)^3 = 0.125.
Step 3: Multiply by the initial amount: 100 × 0.125 = 12.5 g.
So after 30 seconds, 12.5 g remains, which is 12.5% of the original. The calculator shows 12.5 g and 0.125 for the fraction.
Assumptions
- The decay follows first-order kinetics (constant half-life).
- The half-life is independent of temperature, pressure, or chemical state (true for nuclear decay).
- The initial amount is measured at time zero.
- No new atoms of the isotope are being produced during the time interval.
How to Use the Half-Life Calculator
Enter the initial amount of the substance (in any unit, such as grams, moles, or becquerels for activity). Then enter the half-life and the elapsed time, using the same time unit for both (e.g., both in seconds, or both in years). The calculator will output the remaining amount and the fraction remaining.
For example, if you have 50 mg of iodine-131 (half-life 8.02 days) and wait 16 days, you would enter 50 mg, 8.02 days, and 16 days, and get about 12.5 mg remaining.
When to Use Half-Life
Half-life is most commonly used in nuclear physics and radiochemistry to predict how long a radioactive sample remains active. It is also used in:
- Carbon dating (carbon-14 half-life ≈ 5,730 years)
- Medical imaging (e.g., technetium-99m half-life ≈ 6 hours)
- Nuclear waste management (e.g., plutonium-239 half-life ≈ 24,100 years)
- Pharmacokinetics (drug elimination half-life, though that is a separate concept)
In each case, the formula is the same: after one half-life, half remains; after two, one-quarter; after three, one-eighth, and so on.
Common Mistakes and Misconceptions
A frequent error is mixing time units between the half-life and the elapsed time. If the half-life is given in years but you enter elapsed time in days, the result will be wildly wrong. Always convert so both use the same unit.
Another misconception is that half-life means the substance is “gone” after two half-lives. In reality, it never fully disappears; it just keeps halving. After 10 half-lives, about 0.1% remains.
Also, some people think half-life applies only to radioactive materials. It also applies to any first-order process, like the clearance of a drug from the body, but the calculator here is primarily for radioactive decay.
How to Read the Results
The “Amount remaining” is the quantity left after the specified time. The “Fraction remaining” is a number between 0 and 1 that tells you what proportion of the original is left. For example, 0.25 means 25% remains.
If the fraction is very small, the result may be shown in scientific notation (e.g., 1.0e-5), which means 0.00001.
Limits of the Formula
The formula assumes a constant half-life, which is true for nuclear decay under normal conditions. However, for some processes (like certain chemical reactions), the half-life may change with concentration or temperature. Also, the formula does not account for the production of the isotope from other decay chains; if the isotope is being created while it decays, the net amount could be different.
For very short half-lives (fractions of a second) or very long ones (billions of years), the calculator still works as long as you enter the numbers in consistent units.
Frequently Asked Questions
What is the half-life formula?
The half-life formula is N(t) = N₀ × (1/2)^(t/t½). It calculates the remaining amount after time t, given the initial amount and half-life.
How do I calculate half-life from decay constant?
The half-life is related to the decay constant λ by t½ = ln(2) / λ, where ln(2) ≈ 0.693. If you know the decay constant, you can find the half-life this way.
Can I use this calculator for drug half-life?
Yes, the same mathematical formula applies to drug elimination, but this calculator is not intended for medical dosing. For drug half-life, you would need clinical data and professional guidance.
What is the half-life of carbon-14?
Carbon-14 has a half-life of about 5,730 years. This is used in radiocarbon dating of organic materials.
How do I convert half-life from years to seconds?
Multiply the number of years by 31,557,600 (the number of seconds in a year, accounting for leap years). For example, 5,730 years × 31,557,600 s/year ≈ 1.81 × 10^11 seconds.
What does a half-life of 0 mean?
A half-life of zero would mean instantaneous decay, which is not physically possible. The calculator requires a positive half-life; the default is 10 seconds.
Safety and Scope
This calculator is for educational and study purposes only. It does not provide radiation safety advice or medical guidance. Always follow your lab’s safety protocols and the safety data sheet (SDS) when handling radioactive materials.
Related
Formula used
in n0 | Initial amount | g | 100 | 0 in th | Half-life | s | 10 | 0.000001 in t | Elapsed time | s | 30 | 0 out n | Amount remaining | g | n0 * 0.5^(t/th) | 4 out frac | Fraction remaining | - | 0.5^(t/th) | 6
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- How to Find the Continuous Decay Rate
- Total Constant of Decay: How to Calculate It0.000121 1/s
- How to Calculate Decay Constant0.000121 1/s
- Half Life GitHub: What It Is and How to Use It
- Decay Constant: How to Calculate It0.000121 1/s
- Half-Life Games in Order: Full Release Timeline