molecalculator

Moles & Molar Mass

Molality Calculator: How to Calculate mol/kg

Calculator No. 01-6787 · Updated · Formula and assumptions shown below

Molality 0.100 mol/kg
Amount of solute
0.1000 mol
= Mass of solute ÷ Molar mass of solute
Solvent mass
1.000 kg
= Mass of solvent ÷ 1000
Mass of solute
5.844 g
Set in the form below
You enter
Mass of solute (g), Molar mass of solute (g/mol), Mass of solvent (g)
You get
Molality (mol/kg), Amount of solute (mol), Solvent mass (kg)
Rounding
3 dp · 4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator finds molality, the amount of solute in moles per kilogram of solvent. Enter the solute mass, its molar mass, and the solvent mass; the result is reported in mol/kg. Use solvent mass—not the total mass or volume of the solution.

Formula

Molality is the amount of solute divided by the mass of solvent in kilograms:

m = n / kg solvent = (mass of solute in g / molar mass in g/mol) / (mass of solvent in g / 1000)

  • m is molality, in mol/kg (also written mol·kg−1).
  • n is the amount of solute, in mol.
  • Mass of solute is the mass of the dissolved substance, in g.
  • Molar mass is the mass of one mole of that solute, in g/mol.
  • Mass of solvent is the mass of the liquid or other dissolving medium, in g. Divide it by 1000 to convert grams to kilograms.

The calculator first converts solute mass to moles by dividing by molar mass, then divides that amount by solvent mass in kilograms. Its first result is molality; the extra results show the calculated moles and solvent mass in kg. The formula assumes the entered solute mass and molar mass describe the same substance, and that the solvent mass is known.

Worked Example

Using the calculator defaults, suppose the solute is sodium chloride (NaCl), with molar mass 58.44 g/mol. The inputs are 5.844 g of solute and 1000 g of solvent.

  1. Find the amount of solute: n = 5.844 g / 58.44 g/mol = 0.1000 mol.
  2. Convert the solvent mass to kilograms: 1000 g / 1000 = 1.000 kg.
  3. Divide the amount by solvent mass: m = 0.1000 mol / 1.000 kg = 0.100 mol/kg.

The calculator therefore displays a molality of 0.100 mol/kg, an amount of 0.1000 mol, and a solvent mass of 1.000 kg.

Assumptions

  • The provided molar mass is appropriate for the solute’s chemical formula and form.
  • The input is the mass of solvent alone, not the mass of the finished solution.
  • The calculation is a composition ratio; it does not assume a particular temperature, density, or degree of dissociation.
  • For bench work, follow your lab method, the safety data sheet (SDS), and your supervisor.

What You’ll Need

  • The mass of the solute, measured or provided in grams.
  • The solute’s molar mass in g/mol. Calculate it from its formula and standard atomic weights, or use a reliable reference for the specified chemical form.
  • The mass of the solvent in grams. If you have a mass in kilograms, multiply by 1000 before entering it.
  • A calculator, or the calculator above.

Step-by-Step

  1. Identify the solute and solvent. The solute is the substance being dissolved; the solvent is the material doing the dissolving. In a salt-water example, salt is the solute and water is the solvent. If a mixture has several solutes, calculate each solute’s molality separately unless a question specifically asks for their combined amount.
  2. Determine the solute mass. Use the mass of the solute actually present, not the mass of the container or the final solution. If a problem gives a solution mass and solvent mass, subtract the solvent mass to obtain solute mass only when those are the only two components and the data refer to the same sample.
  3. Find the molar mass. Add the atomic masses in the solute’s formula, accounting for every atom and any parentheses or subscripts. For NaCl, 22.990 + 35.45 = 58.44 g/mol when rounded to two decimal places. Confirm whether the formula refers to an anhydrous compound, a hydrate, or a specified ionic form; their molar masses can differ.
  4. Calculate moles of solute. Divide solute mass in grams by molar mass in g/mol. For example, 5.844 g / 58.44 g/mol = 0.1000 mol. Keep extra digits during the calculation rather than rounding this value early.
  5. Convert solvent mass to kilograms. Molality uses kg of solvent. Divide a mass in grams by 1000: for example, 1000 g / 1000 = 1.000 kg. If the mass is already given in kg, use it directly; do not divide by 1000 again.
  6. Divide moles by kilograms of solvent. Use molality = moles of solute / kilograms of solvent. The units reduce to mol/kg. Enter the original masses and molar mass in the calculator to get the same result and see the intermediate values.
  7. Round and label the answer. Round to a precision justified by the input measurements, and include mol/kg. A number without its unit can be mistaken for molarity, which is expressed in mol/L. Do not report more meaningful precision than the measured data support.

Common Mistakes

  • Using total solution mass: the denominator is solvent mass alone. If 1000 g of water receives solute, the solvent mass remains 1000 g even though the final solution weighs more.
  • Confusing molality with molarity: molality uses kilograms of solvent; molarity uses liters of solution. They are not interchangeable. Converting between them generally requires solution density and composition information.
  • Leaving solvent mass in grams: dividing moles by grams gives mol/g, not mol/kg. Convert grams to kilograms first, or use the formula’s explicit division by 1000.
  • Using the wrong molar mass: check subscripts, parentheses, waters of crystallization, and the stated chemical form. A hydrate’s molar mass includes its water molecules.
  • Mixing mass units: the calculator expects solute mass in g, molar mass in g/mol, and solvent mass in g. Convert other units before entering values.
  • Rounding too early: retain calculator digits for moles and kg until the final result. Round the final molality to match the precision of the measurements.

Tips

  • Write down the units beside every value before substituting it into the equation. This helps catch a gram-versus-kilogram error.
  • Check the scale of the result. If the calculation uses 0.100 mol in 1.000 kg solvent, the result should be 0.100 mol/kg—not 100 mol/kg.
  • Use the mass of solvent before dissolution when it is known. Measuring the finished solution’s volume is not part of the molality formula.
  • For a target molality, rearrange the equation: required moles = target molality × kg solvent; solute mass in grams = required moles × molar mass.
  • For dilute solutions, molality and molarity may sometimes be numerically close, but that is not a general conversion rule. Temperature affects volume and therefore molarity; solvent mass does not change simply because the solution warms.

Troubleshooting

  • The answer seems 1000 times too large or small: check whether solvent mass was converted between g and kg exactly once. Also check whether solute mass and molar mass use compatible units.
  • The result is unexpectedly low: verify that the entered solute mass is not a diluted sample mass, and that the molar mass has the correct formula and chemical form.
  • The result is unexpectedly high: make sure you did not enter a small solvent mass where the total solution mass was intended, or enter kg as though it were g.
  • You know only solution volume: that is insufficient to get molality by itself. Obtain solvent mass or suitable composition and density data; do not treat solution volume as solvent mass.
  • The calculation cannot be made from the given information: find the missing solute mass, molar mass, or solvent mass. Do not guess a value; a reliable result requires all three.

Frequently Asked Questions

What is molality?
Molality is moles of solute per kilogram of solvent, expressed in mol/kg.

How do I calculate molality from grams?
Divide solute grams by molar mass to get moles, convert solvent grams to kg by dividing by 1000, then divide moles by solvent kg.

Is molality the same as molarity?
No. Molality uses solvent mass in kg; molarity uses final solution volume in L.

Do I use the mass of the solvent or the solution?
Use solvent mass only. The solute’s mass is not included in the denominator.

Can molality be used when the solvent is not water?
Yes. The formula applies to any solvent when its mass and the solute amount are known.

Does temperature change molality?
Temperature-related expansion does not directly change the mass-based ratio, though evaporation or a chemical change that alters composition can change it.

Related

Formula used
in ms | Mass of solute | g | 5.844 | 0
in mm | Molar mass of solute | g/mol | 58.44 | 0.001
in sw | Mass of solvent | g | 1000 | 0
out m | Molality | mol/kg | (ms / mm) / (sw / 1000) | 3
out n | Amount of solute | mol | ms / mm | 4
out sk | Solvent mass | kg | sw / 1000 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →